Your cart is empty.
Your cart is empty.Product Description
YOU MAY NEED IT
1. For routine checks
After long-term use or an accidental collision, the cooling system may be damaged and leak, which may cause coolant loss, air entering the system, engine cooling difficulties or even serious engine damage. Therefore, radiator leakproofness and coolant condition checks should be given more attention.
2. For safety consideration
It is wise to keep it for vehicle safety or for a rainy day. Take a water tank leak test to reassure yourself.
SET INCLUDES
18PCS Cooling System Radiator Pressure Leakage Tester Kit
Radiator Pressure Tester x 1
Stainless Steel Thermometer x 1
Dedicated Radiator Adapter x 10
Aluminum Cap Adapter x 3
Plastic Connector x 2
Adapter Assembly Tool x 1
Instruction x 1
Red Custom-made Toolbox, 15-1/2 x 13 x 3-3/4 inches x 1
Radiator Pressure Tester
For Pressure Leakage Test
- a. Advantages:
Accurate and quick test on the cooling system and radiator cap;
Convenient designs like quick coupling and thumb-operated pressure relief valve;
Hand pump gauge tester features easy to read pressure gauge with anti-scratch rubber housing.
- b. Tools You May Need:
Radiator pressure tester, thermometer, radiator adapters, aluminum cap adapters, plastic connectors and adapter assembly tool.
- c. Testing Process:
(1) Make sure the radiator is cooled before unscrewing the radiator cap. Select a suitable adapter to replace the radiator cap, connect the pressure tester to the selected adapter.
(2) Press the manual pump to pressurize the inside of the radiator till the readout up to 10-15 psi. Don't over 35 psi.
(3) Wait for a while to see if the gauge pointer moves. Reading drops means there is a leak, find it and repair it. Release the residue pressure and disconnect the adapter.
Wide Application of Water Tank Adapters
Please refer to the instruction for the specific vehicle model and adapter.
Aluminum Cap Adapters(From No.3 to No.5)
No.3 Suitable for Benz, GM, Jeep, Oldsmobile, Pontiac, Buick, Chevrolet, Chrysler, Dodge;
No.4 Suitable for Ford, Peugeot, Subaru, Chrysler, Acura, GM, Mitsubishi, Nissan, Mazda, Toyota, Infiniti, Suzuki, Isuzu, Benz, Lexus, Mercury, Chevrolet, Dodge, Eagle, Geo, Honda, Hyundai, Kia;
No.5 Suitable for Honda, Toyota, Suzuki, Mitsubishi, Chrysler, Acura, Lexus, Kia, Mazda, Chevrolet, Dodge(Colt: 1993-1994), Eagle, Geo, Isuzu;
Radiator Adapters(From No.6 to No.15)
No.6 Compatible with Ford, Benz, GM, Mercury, Pontiac, Porsche, Saab, Saturn, Cadillac, Daewoo, Jaguar, Land Rover;
No.7 Compatible with Volvo, Saab, Sterling, Citroen, Renault, Fiat, Alfa, Jeep, Mini, Peugeot;
No.8 Compatible with VW;
No.9 Compatible with Audi, BMW, VW, Porsche;
No.10 Compatible with BMW; No.11 Compatible with VW, Audi;
No.12 Compatible with Ford Mondeo, International, Land Rover, Opel, Sangyong motor;
No.13 Compatible with Benz, Chrysler;
No.14 Compatible with Ford Mondeo, Focus, C-MAX03;
No.15 Compatible with Mazda;
Auminum Cap Adapters(3-piece) & Plastic Connectors(2-piece)
- Aluminum adapters can be used for separate water tank leakage checks or can be assembled on a plastic connector for radiator cap leakproofness detection.
- Black connector works with adapter No.3(R123) and No.4(R124) while blue connector works with adapter No.4(R124) and No.5(R125).
Stainless Steel Thermometer
Blow-molded Case
Considerations
1. Please read and follow the instructions carefully. Be sure there is the right adapter for your vehicle before ordering to avoid a wrong choice.
2. Recommend wearing protective masks, gloves and goggles and working in a well-ventilated place.
3. Be careful when you open the radiator cap for there may be high temperature coolant spraying out under pressure.
4. After work is completed, be sure to release the pressure first before disconnecting all the connections.
Peter Woodhouse
Reviewed in the United States on January 27, 2025
Pump holds pressure sometimes. Also radiator cap adapter used for testing radiator cap has a loose bulging O ring which gets in the way of connecting it properly.
Pam S.
Reviewed in the United States on September 21, 2024
Bought this hoping it would work well. Some reviews had complaints. It worked perfectly for finding the leak in my radiator!
Romy
Reviewed in the United States on September 2, 2024
QUALITY AND WORKS PERFECT
Customer
Reviewed in the United States on July 18, 2024
This pressure tester kit DOES NOT fit anything as described. I have 4 GM trucks and one GM sedan, all with the same reservoir and there is nothing close. The Honda Accord radiator cap unit doesn't fit either, it's too loose to hold pressure. The blow molded case is mismarked as well. Basically the whole kit is a typical Chinese POS ! Don't bother trying to use the website, it's a spoof, a BS Chinese email account. All in all, it's a total waste of my time and yours. Thanks Amazon, good thing you're aware of the garbage your selling ! I will return this today.
Gerardo N.
Reviewed in Mexico on April 4, 2024
Al momento de hacer la prueba la bomba no retiene la presión en el sistema y te puede mentir las medidas en el sistema
CJ
Reviewed in the United States on August 26, 2023
This test kit is the master of test kits. Fit's all types of radiator covers and also the plastic overflow container that is connected to the radiator. I pressure tested my 2004 F250 radiator and it held at 15psi like it should. Easy to use and material looks of high quality. Many different attachments for multiple types of vehicles. Perfect kit to rule out a worn out radiator or leak. Must have tool.
jot
Reviewed in the United States on August 12, 2023
The ADAFIRST cooling system provides adapters for all the cars I need to test and many more. My old radiator tester no longer has any adapters available. This set is high quality, holds pressure (unless there is a cooling system leak) and looks to be very durable. My first use on a leaky cooling system pinpointed the problem. I was able to confirm the problem was resolved when I completed the repair. Good value in a quality tool.
Alisia
Reviewed in the United States on August 22, 2022
I didn’t have high hopes for this since it was so cheap but it actually works pretty well so far! Fits every Chrysler car I’ve tried and holds pressure… I just don’t like this style of pressure relief valve. Definitely messier than the Mac and snap on ones I’ve used.
Extechie
Reviewed in the United States on November 28, 2022
I received the kit yesterday.Everything in the kit looks to be well made and has a marked place in the blow-molded case.I put it to use immediately to test the integrity of the cooling systems of a Viper and Audi A4. The Viper had just had new head gaskets and a radiator installed, and the Audi all new hoses, radiator and a water pump. Both adapters I used fit perfectly and sealed very well. The hand pumps looks and feels very well made. It pressurized both systems easily and held a constant pressure as long as I wanted to look for leaks (I found none). Both cars had the work done, cooling systems refilled, checked, driven and rechecked, before the kit arrived, so at this point I was not expecting to find anything, but things like head gasket coolant leaks can be difficult to spot this way if it doesnt leak external to the engine.To be clear, I am an auto hobbiest, not a business and the cars are mine. In the past I would do work, refill the system, then spend days checking for leaks and coolant consumption. Now I can have a high degree of confidence in the work prior to first startup. The kit will probably only see limited use, but the 5 cars in our house are 10-30 years old, the extended family has another 4 of the same age, and in the future it will come out whenever maintenance that involves opening the cooling systems is performed to be sure it was correctly reassembled and sealed.
Recommended Products
$18.99
$ 8 .99 $8.99