Your cart is empty.
Your cart is empty.Skull
Reviewed in the United States on March 6, 2025
I purchased this wireless device to replace an antiquated rotational switch that was unsightly and ill placed. I was able to have this mounted under the body very easily. The wireless transponder is compact and lightweight and is best secured with double sided sticky tape and zip ties. The solenoid is robust and appears to be high quality and Well sealed. The initial function and operation is fantastic, but it was just installed so we don’t have any long term history with it. The instructions are not clear, but they are easy to figure out. The remotes were paired and the instructions also provide directions to pair them should they not be paired. One remote did not work due to a dead battery. Each remote uses one 23a 12v battery. Still, this is a super deal compared to a standalone replacement relay and switch.
Donnie
Reviewed in the United States on February 4, 2025
It worked great. It needs better instructions. I was able to figure it out by looking on the original purchase it had what I needed there with that and the paper instructions. Took about a hour and a few wire ends.
Dean Coles
Reviewed in Canada on February 23, 2025
Works excellentAs expected
cody
Reviewed in the United States on February 14, 2025
Had a lot of issues with the controllers and control box. sometimes one controller would make it go up and next time not, sometimes the other one would make it work. Not something I would put any faith into working when are in a pinch. the solenoid seems to be fine all the issues are between the wireless controller and box. If I could send it back I 100% would.
Anthony Saffles
Reviewed in the United States on February 13, 2025
Great setup. Just be sure to hook up the incoming voltage to the flat tabs.
Dustin
Reviewed in the United States on February 11, 2025
So far, this controller works as it should. Probably would have been 5 stars if it hadn't been for a couple of issues. (1) There is no wiring diagram included for the solenoid part as to where to put the wires from the remote receiver. These are visible in the pictures on the Amazon description so you can look there. (2) Only 1 of the Pre installed butt connectors on the remote receiver was correct for the application. The red power wire had a big enough ring terminal to use. The black, blue and yellow had tiny ring terminals when the black should be a bigger ring terminal and the blue and yellow should be female spades. So, just to see if it is going to work, you have to cut the 3 wires and install the proper connectors. Not sure how the warranty would be handled if you tried to send it back for not working but it had been altered. Luckily mine worked
Irina
Reviewed in Canada on May 30, 2024
Arrived quick and exactly as shown. Had to change the wire connectors to spade connectors and then easy install from there! Everything seems like good quality and works great.
Brad Parmenter
Reviewed in the United States on December 31, 2024
I used this to customize my portable sawmill. I installed a small ATV winch with some sprockets and chain for the up and down function of the bandmill. It has good range, came with 2 remotes,which seem to be heavy duty, and was easy to install.
Ventflow Air Duct Cleaning
Reviewed in the United States on December 21, 2024
Adapted it to fit on a hose reel has been working good. Can’t get too far away from the receiver the batteries that it comes with are very cheap and die quickly it will not allow the motor to free wheel for some reason. I’ve been using it every day has been holding up good.
jp
Reviewed in Canada on December 21, 2024
Installed it on my plow car. Works great. Nice and small to hold while plowing
Anthony J.
Reviewed in the United States on December 11, 2024
They literally put the wrong terminals on the wires that go to their own product. Only the positive lead is correct. Eyelets where female flat would go. The Instructions are stupid too. They should include the wire diagram they put on Amazon. Also the remotes turn off after 3 minutes... Too soon.... I am using mine to control a steering motor in my boat. Would be best if the remote did not turn off until I want it off.Include wire diagram, put the correct terminals on the remote and you have a winner.
Customer
Reviewed in Canada on November 14, 2024
Easy to install and work Perfect.
customer
Reviewed in Canada on November 10, 2024
No delay when button pushed works like it should but had to replace all terminals on antenna device to make connections
Recommended Products