Your cart is empty.
Your cart is empty.Product Description
Punch Tool Kit
Grommet Machine can be used as a punch machine, eyelet machine, and rivet machine. It can help you to punch the grommets for Banners, Signs, Belts, Bags, Shoes, and etc.
Made of cast iron, it is durable, stable.
Mounted to a tabletop or just stand alone. Gets grommets to be set further into the material, not just along the Edge. Press the Lever, which as simple to use as a stapler.
Grommet Machine can be used as a punch machine, eyelet machine, and rivet machine. It can help you to punch the grommets for Banners, Signs, Belts, Bags, Shoes, and etc.
Specification
Material: iron
Size: 10-1/4" x 14-1/2" x 3-1/4"
Hole Size of Grommets: 1/4", 3/8'', 1/2"
Length of handle: 12-1/4"
Package
1 x Heavy Duty Eyelet Grommet Machine
1 x 1/4" dies
1 x 3/8'' dies
1 x 1/2" dies
500 x #0 Grommets
500 x #2 Grommets
500 x #4 Grommets
Improve Your Efficiency
Applying grommets has become easier than ever. It can save many time to punch the grommets rather than by hammer.
Fred
Reviewed in the United States on March 6, 2025
I’ve had this for a couple years now and have used it many times. It takes a little practice and patience, but once you get the hang of it, this tool is invaluable. I’ve made everything from shade sails to custom sized tarps to grill covers. Comes with plenty of eyelets to play around with, and when you need more, you can pick them up at nearly any hardware store or right here on Amazon
Customer
Reviewed in the United States on January 31, 2025
the press itself seems to work fine.however the grommets that they sent with (and it was lovely they were 3 different sizes WITH the pieces needed to use them)but the grommets themselves are incredibly thin and flimsy. not happy with results at all.am re thinking if i even want to keep the press
Eduardo
Reviewed in the United States on September 5, 2024
It’s not durable, when trying to grommet the Banners, it doesn’t make the hole or get the grommet to stick
Lloyd
Reviewed in France on March 6, 2024
Construction solide et précise, permet de poser facilement et fermement les oeillets.Privilégier des oeillets de qualité pour éviter les déformations ou ratés possibles avec des oeillets bas de gamme.Les oeillets livrés sont plutôt légers et leur épaisseur ne convient pas pour le cuir épais ou les épaisseurs multiples pour lesquels des oeillets d'épaisseur égale ou supérieure à 5mm sont plus adaptés.Le manchon destiné a habiller le levier est difficile à mettre en place mais on y arrive avec de la patience et une pince plate.
Thomas
Reviewed in the United States on March 2, 2024
Delivered before scheduled day, professionally and undamaged. Total time and money saver tool. I used a die/hammer for grommets for a long time. It worked ok, but eventually they work loose. With this tool, the fulcrum pressure DESTROYS the hammer/die method. And, the back presses flush. With the hammer/die method, barbs, split-outs happen on the backside thus irritating the skin, pending of course what & where the application is for. Thanks!!!
Tordh Nyman
Reviewed in Sweden on March 16, 2024
Fungerar & gör sitt jobb
Maria W.
Reviewed in Germany on December 14, 2024
Wir haben Edelstahl Ösen zusammengedrückt. Geht sehr gut
Customer
Reviewed in Canada on November 5, 2024
Love it I don’t have to send out to a company to do the Grommets I just use my machine
Jorge Sánchez
Reviewed in Spain on November 21, 2024
Funciona perfectamente y justo lo necesario para lo que tiene que hacer. Todo correcto.
Mal
Reviewed in the United States on October 19, 2024
Makes the install of gromets Easy, amd quick with hi quality results
Brinda Hutchins
Reviewed in the United States on July 3, 2023
The hand press its self is good and sturdy, just the grommets are thinner than I expected. Thought they would be a bit thicker around. The black cushion handle that is provided, didn't fit, there was no instructions on how to make it go on smoothly, so I ended up cutting it down the middle long ways and taping it to hold. The screw at the bottom of the press was bent so it was a bit tricky to get it to move so the bottom die would fit it. Otherwise it's a good hand press.
CaffeNet
Reviewed in the United States on November 12, 2022
I used this to put grommets in corrugated plastic signs during the recent midterm elections so that they could be more easily attached to fences and posts. I had about 200 to do so the little hammer method wasn't going to cut it. This machine worked just fine, even though it's not actually designed to do the job I had it doing. It's cast, and heavy. The dies and enclosed grommets are of decent quality. It does need to be stabilized, either by screwing to a bench or, as I did, screwing it to a piece of 1x8 board as a base. I can see the cutter dies wearing out and I hope I can replace them.
lp-TN-001
Reviewed in the United States on March 31, 2021
I make busy blankets, sometime called fidget quilts. Think of a large placemat sized piece of fabric with items on it: a zipper to zip up and down, a button to un-button and button, a fabric pocket with a hook-and-loop closure which can be opened and keys on a ribbon removed; a strip of “fur” which can be petted/stroked to help bring memories of Fido or Fluffy, a string of large, colorful acrylic beads to "worry", and something to lace up - like how you would lace up your sneakers. I make these busy blankets for residents of our local memory care facility. I had been making ribbon loops - which takes too much time. Then I found a kit that I could install grommets by hammering them. Evidently, I'm not strong enough to have made that work. Then I saw an on-line video which recommended that I get one of these grommet hand presses if I'm going to be doing "production" work - which I am.Right now I'm using the 1/2" sized grommets. I take a little metal circle and place it over the space where I want a hole. I take a ball point pen and draw a line inside the circle. That's the size I want my hole to be. Sharp snips make the holes, I insert the larger piece with the "throat"- or whatever it's called - on the machine, slip the right side of the fabric face down over the "throat", put the little metal circle on top and bring the handle down. I don't even have to stand up and put some oomph into the effort. The fixing of one grommet is the work of less than a minute. And, when I'm putting 6-8 grommets into a single busy blanket, time adds up. As soon as I've used all of the ½” grommets I’ll start using the 3/8” grommets. The shoe laces I’m using will fit that size too.My ONLY complaint is that this company doesn’t sell refills of its grommets. Yet. I did ask the question about what other grommets could be used with this QWORK hand press and was advised that any would do. Well, I’ve tried using the ½” grommets from the original kit I bought and the press doesn’t make them work. I’m thinking it’s because the grommets might be stainless steel and of a stronger metal or it’s because of me. I’ll try again when I’m about to run out of the 3/8” grommets. The thing is, if I want to buy grommets in bulk then a tool is usually for sale, too - buy this tool and get a pile of grommets!. All I want are more grommets! I already have this tool and it makes my work so easy. It’s worth every dime. I don’t need another one.
Recommended Products