Your cart is empty.
Your cart is empty.Quall gear PRB-717-WHT is the latest addition to projector mounts category. Prb-717-wht brings most advanced features that are usually found in high end professional grade projector mounts but at a price point affordable to regular consumers. Prb-717-wht lets you perform The following adjustments for a perfect projection: tilt: 0 to 60 degree.
AR
Reviewed in the United States on February 14, 2025
Very sturdy and easy to install
Phillip Rieger
Reviewed in Germany on November 25, 2024
Nutze die Halterung für meinen Epson TW7000 und der hällt jetzt schon über ein Jahr sehr gut!
Terry
Reviewed in Australia on December 10, 2023
Great quality mount that has good options for positioning my projector, and an excellent price.Only issue was that the two main pieces were difficult to connect once the base was screwed into the wall.
HS
Reviewed in Canada on November 28, 2021
A number of nice features:- Lots of supporting hardware. Spacers and machine screws to connect to a variety of different projectors come in the box, as well as screw and screw inserts for mounting either to studs or to other surfaces.- Mounting arms have sufficient adjustabillity such that I was able to find a configuration that worked with my oddball Epson projector, which is only supposed to be compatible with special 3-point mounting plates.- A thorough installation manual (which helps! installation is fiddly).- Cleverly constructed to provide lots of angle adjustability.- Once you've hooked up your projector and dialed all the angle adjustment just so, you can still detach the projector from the main mount assembly without disturbing those adjustment choices.- Seems sturdy enough.- Pretty cheap.
Cliente de
Reviewed in Mexico on January 7, 2020
El material es de calidad, de buen grosor, muy resistente. Se adaptó a nuestro proyector Epson Powerlite S39 sin problema. Trae todo lo necesario para la instalación. Como yo lo puse encima de mi cama, le puse otros traqueteos expansivos por seguridad porque los que trae son de plástico. Si sabes usar un taladro, la instalación no es complicada.
Jura DDK
Reviewed in the United States on May 14, 2018
Very good product with so many possible options for various projectors. Used it to install OPTOMA UHD60 and it works.Pros.:Convenient to hang and to remove the projector with designed hanging bracket,Ability to adjust the projector any directionSimple to assemble and useBlack colorAbility to use with equipment up to 30lbTools includedCons (or in need of improvement):1. Spacers seem only to fit perfectly on projectors with recessed mounting hole, and UHD60 mounting holes are not recessed. Most likely minor imperfection, but what it means that either the projector’s housing or the next bracket bottom spacer (depends on how you oriented) will only contact with protruding part of the spacer on one side. Again, there are 4 points of mount so if all tighten correctly, no need to worry. However, it would be great if the kit came with standard flat on both sides spacers as option.2. Small but worth mentioning, out of the box the mounting bracket needed to be aligned before assembly.3. Also, it would be great if the all adjustments had integrated marks/lines starting with 0 in the center. That way it’s easier to calibrate to ideal 0 tilt position and adjust from there based on your condition(s), this would also make it easier for smaller precise adjustments.
Cedric
Reviewed in France on December 17, 2018
Très bien,solide pas chere et compatible avec mon optoma uhd51 je recommande
Customer
Reviewed in the United States on February 11, 2016
A sturdy ceiling mount that gets the job done. I purchased this one above all others I looked at because of the amount of adjustments available, the color, and the price.It was fairly easy to assemble and the kit comes with many different screws and washers to fit your exact projector. Mine is a BenQ W1070 and I did need to stack up a few washers to get the screws to sit tightly to my projector, but it is very sturdy.The biggest drawback is that the ceiling mount piece only screws in to a joist in one direction. You'd better hope your ceiling joists run parallel to your screen if you want to take advantage of the full features of this mount. My joists are perpendicular, so some of the finer adjustments that this mount is capable of simply won't work, because the mount is technically facing a side wall (not the screen).Another downside is the height is not adjustable. I have a lowered ceiling beam running right along the area of the projector. I would have liked to lower the projector by 1-2 inches so the projector could have been located closer to the beam while still allowing room for HDMI and power cables. Instead, I had to move the projector closer to the wall, restricting my maximum screen size.All in all, I am happy with the mount because it is installed, calibrated, and it is holding my projector. I'm not going to take it down after all the effort of installing it to return it. But, if I had known that I would have liked to have more control over the exact projector placement, I probably would have looked for a model that had an adjustable height and some kind of swiveling base. If you are just looking for an adaptable (yet basic) ceiling mount, than this one offers more options than many basic models.
JJCEO
Reviewed in the United States on December 29, 2015
The media could not be loaded.
Recommended Products
