Your cart is empty.
Your cart is empty.Edwin D.
Reviewed in the United States on September 30, 2024
Worked well, and with no issues.
G. C. T.
Reviewed in the United States on September 14, 2024
Thin enough to fit below GPU bracketStays very cool since there's enough airflow in fins both vertical and horizontalAbout 25-30c reduction difference in hot spot underload than previousThose rubber bands will sooner or later, become crumbs and cause debris for sure. But that's not a problem in terms of operation for long periods of time
S. Mayo
Reviewed in the United States on July 24, 2024
Has a low-profile heatsink of aluminum, sized for a 2280 M.2 SSD. Plenty of spacers and screws and a great little phillips screwdriver (magnetized) to install those little SSD screws. Has silicone thermal pads to conduct heat to the heatsink. Even has little rubber bands to hold the heatsink to the SSD (even though they all broke when trying to wrap around the assembly). Everything was x2, so I have spares for future SSD's. Good Value for the $
David Plimley
Reviewed in the United States on June 19, 2024
I ordered this primarily for hold down screws for an M.2 NVMe drive, but for the great low price also got some spare parts. The heatsink and thermal pads fit nice, keep the temperatures down (which is important with NVMe SSDs for drive longevity) and the whole kit was worth every penny.
Mr. A
Reviewed in Canada on February 14, 2024
I ordered these SSD heatsinks because they were cost-effective and low-profile. Admittedly, these weren't my first choice, but I figured they would be fine for mid-range SSDs and potentially fit in my laptops.I am glad I got them because they worked far better than I had hoped.Their cooling was more than adequate inside a mini-PC and desktop. An easy 10C to 20C drop in maximum tempurature. Sadly, they were too tall for the laptops I had.These will work with dual-sided 4TB and 8TB SSDs.The only downside is that both thermal pads are the same thickness. Some of my SSDs had uneven chip heights and required more than one thickness for proper contact.
Ferngully
Reviewed in the United States on December 16, 2024
Works as intended, I do wish the rubber bands are black to match the heatsink.
YoYa
Reviewed in the United States on December 13, 2024
Easy installation and gets the job done quick.
Adrian Zeykoen
Reviewed in Canada on December 12, 2024
Thanks 👍🏻
RgP
Reviewed in Canada on November 7, 2024
I’m not sure why M.2 s don’t come with cooling options but this kit seems to do a good job
MarkD555
Reviewed in the United States on December 13, 2023
I was short on screws for mounting an M.2 SSD, and ended up with this kit instead of just screws - because a little extra heat sink on recent large SDDs is never a bad idea.The blue heat transfer sticky pad is not that sticky, but it does not need to be due to the bands; and might save you if you apply it wrong. It's not a disaster to take it off and reapply.This kit does not dissipate heat from the back side of the SSD, but that is likely not needed in many cases unless you have an unusual build or possibly a hot console.I used both sets, would order this again.
yg
Reviewed in Canada on January 4, 2023
Bought two pieces for Samsung 970 Evo Plus 1TB and P1 1TB. It is very easy to install, and it comes with small screw ( this screws are rare to find!). The maximum temperature for 970 Evo is dropped from 80'C to 62'C in my test before and after with heat sink. for P1, it is dropped from 65'c to 50'c. Very impressive.
CNT
Reviewed in Canada on April 30, 2023
Be aware that the 2-pack only doubles the heat sink and thermal pad, and not the screw package.I bought this because my system (early SSD laptop) has tight clearances and pretty much none of the bottom U-shaped flange heat sink units would work - the screws attaching the flange to the heat sink would rub against the neighbouring components. Most of the SSDs with heat sink included tend to be a little too tall, and because the original 80 GB SSD didn't put out as much heat, I had to add a heat sink.The heat sink is rather low profile, which I needed. Not happy about the rubber bands, which I expect will fail over time with heat exposure. I might end up epoxying a few dots between the thermal pad and the heat sink and then cut & epoxy some tiny bits of the thermal pad to the top to try to hold it in place against the other side of the laptop - not great if the laptop gets dropped, but it beats the heat sink moving around.
daisy lani
Reviewed in the United States on April 27, 2022
such a good bargain. two sets of heat sinks for $7....can't beat that. I wasn't sure if it would be any good but I figured what the heck and give it a try. I put it on my m.2 gen4 samsung and ran some tests. running some speed tests of 5 iterations of 32GB read/write I was getting 69 degrees stock and with the heat sink I got 63 degree so I dropped temps by 6 degrees under heavy use. Very easy to install and the, don't know how long the rubber band will last but so far so good. Its nice that it came with screws also cause I really needed them.
Recommended Products