Your cart is empty.
Your cart is empty.4.7 out of 5 stars
- #6,457 in Musical Instruments (See Top 100 in Musical Instruments)
- #8 in Trumpet Mutes
Protec's replacement cork for mutes can be used on most makes and models of straight and cup mutes! Will stick to wood, aluminum, carbon fiber, and more!
Rick
Reviewed in the United States on February 8, 2025
These thin cork straps with adhesive were perfect for adding a little thickness to my existing corks. My cup mute now fits my Getzen 1052. An inexpensive way to do it. Now I can play muted.in the Typewriter by Leroy Anderson!
Rick
Reviewed in the United States on February 8, 2025
These thin cork straps with adhesive were perfect for adding a little thickness to my existing corks. My cup mute now fits my Getzen 1052. An inexpensive way to do it. Now I can play muted.in the Typewriter by Leroy Anderson!
Sandy
Reviewed in the United States on January 7, 2025
Good quality, correct size.. Makes mute 'new' again.
Sandy
Reviewed in the United States on January 7, 2025
Good quality, correct size.. Makes mute 'new' again.
Moe Green
Reviewed in the United States on January 18, 2025
A quality product, at a reasonable price, on-time
Moe Green
Reviewed in the United States on January 18, 2025
A quality product, at a reasonable price, on-time
Karl Wolf
Reviewed in Canada on September 24, 2024
Worked great to replace one of my broken pads on stone lined cup mute.
Karl Wolf
Reviewed in Canada on September 24, 2024
Worked great to replace one of my broken pads on stone lined cup mute.
Customer
Reviewed in the United States on August 29, 2024
Easy to use
Customer
Reviewed in the United States on August 29, 2024
Easy to use
Chesarasara
Reviewed in the United States on May 23, 2024
I have an original Jo-Ral mute. I was so happy to find this cork so I can Fix it and use it again!I took trumpet lessons from Joe Alessi He was the“Jo“ Part of the designer and inventor for this mute. It was one of the first, if not the first to Help keep the trumpet in tune while Using the mute.The cork had worn off through the years and I am So happy to be able to fix this mute and use it again!!
Chesarasara
Reviewed in the United States on May 23, 2024
I have an original Jo-Ral mute. I was so happy to find this cork so I can Fix it and use it again!I took trumpet lessons from Joe Alessi He was the“Jo“ Part of the designer and inventor for this mute. It was one of the first, if not the first to Help keep the trumpet in tune while Using the mute.The cork had worn off through the years and I am So happy to be able to fix this mute and use it again!!
Customer
Reviewed in the United States on December 28, 2024
Repaired my mute !!!
Customer
Reviewed in the United States on December 28, 2024
Repaired my mute !!!
Kate
Reviewed in the United States on January 28, 2024
One of the corks broke on my old Humes & Berg cup mute. For years I put off doing anything about it. Well, I finally got tired of holding the mute in or risk having it crash to the floor during a performance and ordered these replacements. My plan was to replace all 3 corks since the others were rather brittle and dry. Being the procrastinator I am, I only replaced the broken one. The mute stays in the bell like a dream! Highly recommend!
Kate
Reviewed in the United States on January 28, 2024
One of the corks broke on my old Humes & Berg cup mute. For years I put off doing anything about it. Well, I finally got tired of holding the mute in or risk having it crash to the floor during a performance and ordered these replacements. My plan was to replace all 3 corks since the others were rather brittle and dry. Being the procrastinator I am, I only replaced the broken one. The mute stays in the bell like a dream! Highly recommend!
S. N. Felix
Reviewed in the United States on June 2, 2023
I looked around online and didn't see any information about this, so I thought I'd leave a brief review just to clarify for anyone looking: these cork strips DO fit the Harmon 3-in-1 aluminum trumpet mute. I think you can buy with confidence! More details on the strips and how I used them below:I had an old one (from like, 10-15 years ago) which had a missing cork strip and the other two strips being in questionable condition. I learned that those mutes are pretty expensive online and I only needed it for a total of 3 measures in a set (lol), so I wanted to just revive this mute.What I did: I used rubbing alcohol and a box cutter to strip off the old cork and adhesive to the best of my ability. Then, I wiped it down with nail polish remover and a cotton ball to make sure ALL the old adhesive was off. I stuck the strips of cork on the mute and held for about 15 seconds, and left it overnight before using it. There are no instructions included with these cork strips, but this is pretty standard for many types of adhesives to help it stick.Works fine and fits like a glove today!If I can offer any advice to anyone replacing the cork strips on their straight mutes, it would be this: use a permanent marker or pencil to draw a little dot or line where the strips should go. I will have to go the next 10-15 years between replacing cork strips knowing that one of the strips is slightly uneven to the other two :)
S. N. Felix
Reviewed in the United States on June 2, 2023
I looked around online and didn't see any information about this, so I thought I'd leave a brief review just to clarify for anyone looking: these cork strips DO fit the Harmon 3-in-1 aluminum trumpet mute. I think you can buy with confidence! More details on the strips and how I used them below:I had an old one (from like, 10-15 years ago) which had a missing cork strip and the other two strips being in questionable condition. I learned that those mutes are pretty expensive online and I only needed it for a total of 3 measures in a set (lol), so I wanted to just revive this mute.What I did: I used rubbing alcohol and a box cutter to strip off the old cork and adhesive to the best of my ability. Then, I wiped it down with nail polish remover and a cotton ball to make sure ALL the old adhesive was off. I stuck the strips of cork on the mute and held for about 15 seconds, and left it overnight before using it. There are no instructions included with these cork strips, but this is pretty standard for many types of adhesives to help it stick.Works fine and fits like a glove today!If I can offer any advice to anyone replacing the cork strips on their straight mutes, it would be this: use a permanent marker or pencil to draw a little dot or line where the strips should go. I will have to go the next 10-15 years between replacing cork strips knowing that one of the strips is slightly uneven to the other two :)
Recommended Products
