Your cart is empty.
Your cart is empty.4.6 out of 5 stars
- #41,123 in Arts, Crafts & Sewing (See Top 100 in Arts, Crafts & Sewing)
- #27 in Airbrush Spray Booths
Product Description
Customer
Reviewed in the United States on March 5, 2025
Happy with this size and quality , noise level is normal for 2 fans going ,like the design of enclosure. The identification sticker on unit says the model is HS-E550 which does not jive with the product description on amazon and brand name is TO GUSH. A little more detail and description. I purchased the larger unit, inside work area dim. 20" wide x 12 3/4" hi x 13" deep. I model R/R in HO scale. I'm glad I choose the larger work area as some structures can be on the larger size. The lighting is great and all worked as they should. It has 2 fans that work on a rocker switch so you can turn on 1 fan or both. The exhaust hose is rigid plastic that will hold the bends to whatever configuration you bend it to. Air transfer is adequate for air brushing. The fan exhaust is out the top which is a bit of a space saver. On Amazon i'm finding the same units with different MFG. names , some with slight differences like fan cfm or switches. But I think many of the enclosures are all the same. Quality is good it's a hard plastic so treat it as such. Assembly was easy. Turntable 7.5 " dia. has holes for mounting gator clip tools. I would like to see it rotate a little more freely. All told I am happy with this paint booth and would recommend !
Customer
Reviewed in the United States on January 27, 2025
Really works! It captures fumes very well spraying a medium amount of paint. If you’re doing small models and figurines this will be all you need. I did notice if you really crank the paint up it all won’t get captured. That’s because the spray cloud is bigger than the booth. Really impressed with the lighting, it works great! It snaps together easily and maybe took 15min first go around and probably will take only a couple minutes after that. I did use duct tape around both ends to seal duct which should be done in any duct system to seal.Would I buy again…yes.
Pavel
Reviewed in the United States on May 17, 2024
Easy to assemble, the lights are very bright, fan has two settings and suction is good. The fan isn’t too loud, even when on high. I don’t plant on transporting it, but if you were inclined to pack it from place to place, it’s easy to setup and disassemble. Work space is good sized and the turntable is nice too. I’ll use it for painting models, so it should be perfect.
Customer
Reviewed in the United States on November 14, 2024
Had it for over a year and everything is still running great. I ran a bead of wide tape along the sides where they attach to help cut down on any overstay. The dual fans seem to be doing what they're designed to do, though I wouldn't mind having something a little more powerful. I use mostly acrylics and would like to be able to spray some lacquers and better primers, but hesitant due to the fans size/speed. Speaking of fans, when they're both on, it's about as loud as a hair dryer to me. The leds are also really bright, which is fine with me. Need to find a replacement filter somewhere though.
Mr. Crouch
Reviewed in the United States on July 18, 2023
The media could not be loaded.
H. Feldman
Reviewed in the United States on May 19, 2022
I mostly am using this with rattle-can spray-paint (such as spray acrylic from the amazing Montana-Gold). The unit is in my workshop which means noise isn’t an issue but it is pretty quiet (I’d put it moderate bathroom fan level - small apartment you’ll hear it when it’s running, workshop it just blends in). It seems to suck a huge percentage of the vapors back and you see it deposit on the filter. I vent the hose outdoors which works well to vent the solvent smell. Assembly was easy (it sort of folds out like a tent). The hose that comes with it is a semi-rigid extendable plastic tube. It is way to stiff and when you try to flex it to point the nozzle out it pops out of the connection on the unit (gaffers tape would hold that in place) or go to your local big-box home store and get an 8’ semi-rigid expandable aluminum one for dryers which you can pre-bend and then stick into the rubber adapter.
Andrew Simone
Reviewed in the United States on July 4, 2020
TLDR: Seriously great product and wonderful customer service. Highly recommend.My husband and I recently got into airbrushing and so we ordered this spray booth after careful consideration, hoping to get it quick and get started working! A day after I purchased it, I realized that the one I had ordered didn't have the adjustable lights/ventilation and that it wouldn't arrive until mid August (over a month from the purchase date...) so I tried to cancel it and bought the one I wanted (from the same company) The first couldn't be canceled so as not to not end up with 2 I canceled the new one, resigning myself to getting the version I didn't want whenever it eventually arrived.A rep from the company reached out and wanted to clarify the reason for the attempted cancellation and the multiple orders. I explained wanting the variable version and wanting it sooner and they were absolutely wonderful and upgraded our machine without hesitation and it shipped the next day.The spray booth was scheduled to arrive August 13th and instead it got her July 3rd. It took all of 5 minutes to set up.It was easy to put together and is a really nice solid quality. The LED lights are wonderfully bright and they have a very clever system for linking all the lights together but keeping the wiring and lights out of the way of the paint.The dual fan system is very quiet for the amount of air it moves (the dehumidifier in my studio is louder!) and I like that when you shut it off it slows to a stop instead of just coming to an abrupt stop. (that will be better for the motor in the long run.)Thank you to the people at TOGUSH for making a great thing and being responsive and helpful!
Recommended Products