Your cart is empty.
Your cart is empty.High temperature shelf and mold primer is designed to handle higher temperatures. Create flawless castings, avoid glass sticking to molds. Recommended kiln wash for casting molds including premium Colour de Verre casting molds. Applies smoothly and lasts for multiple firings. Powder, requires mixing before use. Includes directions (listed below). 1-1/2 lb container. Directions: Mix 1 part powder to 5 parts water. Mix thoroughly. Apply evenly to shelf with soft bristle brush 4 or more times. Cure primed shelf or mold at 550º F for 20 minutes. Remove used primer by vacuum, brush or damp sponge. Note: Mixed solution will precipitate to bottom of container. Shake vigorously. Use the included marbles to assist with the mixing process.
AAE
Reviewed in the United States on December 27, 2023
This was a great price for the volume of kiln wash. I was a little disappointed it didn't come with the marbles recommended for stirring it, or a second container to put the wash into, but these are small complaints. I can get my own marbles, and I have plenty of Tupperware
Joan Fluette
Reviewed in the United States on November 12, 2023
Save your money. I read this was a suitable alternative to ZYP…but finally got around to using this product and…two pieces completely fused to the molds themselves…
Customer
Reviewed in the United States on April 30, 2022
Love this product glad it turns pink
Kay Primer
Reviewed in the United States on December 22, 2020
This is what I used on some metal molds. Seems to have worked just fine
RadioRick
Reviewed in the United States on April 15, 2018
Same brand I've used before, but I let my stock go down and needed some fast. Amazon to the rescue! Great for glass fusing.
Max Kisner
Reviewed in the United States on December 25, 2016
Does not come in container as advertised. Also no mixing instructions as advertised. I will find a container for wash and list mixing instructions . Just starting into glass fusing the plastic bags are not resealable.
Nancy A. Geiser
Reviewed in the United States on October 7, 2016
The only thing I didn't like was that the kiln wash was in a plastic bag, which is no big deal. It is much easier to measure from a plastic bucket than the bag, so I just use another bucket . It works great on my molds and kiln shelf. I like the purple tint, makes it easy to see where you have been so you can get good coverage.
Review
Reviewed in the United States on June 13, 2015
It works well. You must mix it well so that you don't get purple streaks on your molds.I like the purple, its a good indicator that your mold is ready for the kiln.After firing the mold is white again. I brush clean and use fewer coats on subsequent uses.
Recommended Products
