Your cart is empty.
Your cart is empty.Product Description
Product Overview
PR10 Power Recorder is displayed by 2.4 inch TFT color LCD, and it can measuring a variety of electrical equipment’s power, power factor, voltage, current, frequency, accumulated electricity consumption, accumulated electricity bill, accumulated electricity time, one shot electricity consumption, one shot electricity bill and one shot electricity time.Daily use of electricity and electricity bill will be recorded, you can see the form of a chart or list of historical records. PR10 is suitable for the measuring and monitor power consumption of the household, factory, office and other cases, and can be used to power on or power off a various electric equipment according your setting.
- 2.4 - inch true color TFT LCD display.
- 0.5FS - level measuring accuracy.
- 8 Languages UI can freely to be chosen.
- 23 currency units can be set freely.
- Date and time can be set, 5 date formats are supported.
- Automatic record historical data, which can be review in the form of a list or chart.
High quality material,High reliability,Preventing burning
High reliability switching power supply
Using high-reliability switching power supply, the input voltage range from AC85V to 265V.
Flame retarding materials
The plastic shell material is made of fire retardant material, Good flame retardant and anti impact performance, high strength.
Heat resistant silicone suture
The connection in the recorder is a high temperature resistant silicone wire with a cross-sectional area of 2.5 square millimeters, which has good flame retardancy and toughness.
High current relay
SANYOU 16A relay is used to improve the reliability of the system.
History records
Month-Chart
Month-List
Year-Chart
Year-List
PR10-E has 9 timers
- Timer 1 and Timer 2 are advanced timers, which can be specifically set to power on or off at a specific time on weekdays or weekends or to light up or turn off the device at a specific time on a specific date.
- Timers 3 to 9 are general-purpose timers. They can be set to turn the power on and off at a certain time, but they cannot specify to turn on or off the power on a specific date.
Alarm and protection
- It has an alarm function and can be set to trigger an alarm when the voltage, the current, the power or the temperature exceeds alarm settings.
- It has an output protection function and can be configured to cut off the power when the voltage, the current, the power or the temperature exceeds the output protection value.
- The alarm limit and the output protection limit can be freely set.
kieth
Reviewed in Canada on September 29, 2024
Not sure if I got a lemon or if they are all the same.Worked great for a day or so, then the screen went white. Nothing seems to fix it.
clalac
Reviewed in Canada on December 15, 2024
work well and easy to read
serge
Reviewed in Canada on January 28, 2024
Works great and can handle more watts than most.
Busy Executive
Reviewed in the United States on August 1, 2023
I use mine in the workshop to help me avoid inadvertently overloading circuits.Overall, it couldn't be much simpler - just plug it into a standard 15A outlet and you're good to go. The display is reasonably large and easy to read, and you can tell at a glance what your power consumption is. I like that you can set an alarm threshold and it will alert you if you get near to overloading a circuit.There are a few things I'm not thrilled about.First is that the unit is large enough that it obstructs the second receptacle in the outlet it's plugged into. I use an adapter that gives me three outlets out of the power meter, but that's not a great workaround.Second issue is that I wish the meter reported both the current and the maximum power observed over time. When I run (say) a large table saw, there's an initial surge as the tool spins up, but I don't see that number unless I'm staring at the power meter while starting the tool...I'd much rather have a way to see the current/peak/average consumption.Third, I'd like to see an option for a version of this power meter that can be used on a 20A circuit. Seems to me that if you have higher-power appliances/tools/whatever, this might be what you'd want to measure.Fourth isn't really a shortcoming, but it would be nice to see the manufacturer invest in some type of app or connectivity, whether Bluetooth/BLE, WiFi or even something like Zigbee or Z-Wave. It would be nice to have the option to integrate the metrics from the power meter with things like home automation systems. Still, this one is just a "wish list" item - the vendor is clear that they don't offer this sort of feature.Shortcomings aside, I do think this power meter is of good quality and works as advertised. It's easy to use, accurate and definitely helps me to better understand my power consumption without costing an arm and a leg.
Kate
Reviewed in the United States on October 21, 2023
I was a bit hesitant to order one of these tools at the price, but it did look like it was easier to read than some of the less expensive models. It arrived well packed and was preprogrammed with the cost per kilowatt hour so it was extra easy to immediately tell how much I was spending on any given device I plugged into it.It is just the right size and seems well made. It helps with reading more than just line voltage and kilowatt hours. It shows wattage draw and even a few other measurements I am not familiar with.Overall a great product! Recommended!
setuid
Reviewed in the United States on July 4, 2022
I bought one of these back in November 2020, and my entire homelab's UPS is plugged into it... upside-down, because that's how it was designed, as some previous reviews have stated.I've used many P3, Kill-a-Watt, Watts-up meters in the past, and while they're great, they have a habit of going out of calibration and can't be fixed. Also, those two companies are no longer producing watt meters, so we're left with these options.I bought another this week and it came in today. I was preparing to have to disassemble it and resolder it into the correct orientation, but to my surprise, it was correctly oriented, right-side-up, right out of the box!They have listened to the feedback from their customers and addressed the single biggest complaint about the ergonomics of the adapter. Great work, ZHURUI!In addition to that, I noticed that the screen was much more responsive, snappier UI, and a touch more 'crisp', brighter, than the other one I bought, even set to the same brightness level.My only (minor) nitpick, is that you can't go to 5 or 6 digits when calibrating the per-kWh costs of your consumption. My power is $xx.yyy, but you can only go to 4 places total, which is not enough to get an accurate measurement of power to the thousandth place, like my utility company bills.Other than that, it's a fantastic device! Now if they can add an API or a way to datalog from the device straight into Prometheus or Grafana, I'd be even happier! (yes, I already do this with my Sonoff S31 + Tasmota custom firmware, but no display on those).Keep up the great work, evolving and listening to your customers!
Xbox Gamertag
Reviewed in the United States on July 23, 2022
Pros: Big easy to read color display that is backlit, and it "just works". I took it apart and was relatively impressed with the build quality too.Cons: It does run a little warm and it isn't UL listed so you have to use it at your own risk.My fridge seems to run the compressor way more often even after cleaning the coils and I was worried about how much this was costing me. This unit shows the all the stats (watts, amps, cost per day and cost total) so just leaving it in for a week showed me it was less than 70 cents a day which is OK I guess. I'll have to compare that with my next utility bill but I've got no reason to think it's inaccurate.It does have a lot of other features that I don't use. It has temperature, voltage, and current alarms which I turned off but if you lived in an area where you'd be concerned about power spikes or something that could be useful.The unit runs a little warm and I suspect that's mostly from the enormous relay inside it. I wish it had vents for cooling on the top instead of being completely sealed, ventilation might resolve that warming up issue entirely.It's easy to take apart but you do need those triangle-head security bits -- it doesn't standard Phillips or slotted head screws. However somewhat conveniently the internal CR2032 battery IS socketed so it's trivial to replace it when the battery dies some day.I hear these things shouldn't be used near their maximum rating so I wouldn't use it with any kind of heating device. Inside the wire is of a large gauge but soldered in place instead of using pin and socket connection so in a real bad situation I suppose wires could come loose and touch things.But for fridge, it's perfect. No problems!
Recommended Products
$403.91
$ 99 .00 $99.00