Your cart is empty.
Your cart is empty.Product Description
Why Choose A ABIGAIL?
A ABIGAIL Window Lift Motor is made by stronger material to prevent premature wear, striping and breakage. The motor is designed with extra torque motors to prevent premature failure resulting from improperly lubricated window lift regulators.
Fits for the following vehicles
- 2004-2009 Mazda 3 Front Right & Rear Left
- 2006-2015 Mazda 5 Front Right & Rear Right
- 2003-2008 Mazda 6 Front Right & Rear Left
- 2007-2012 Mazda CX-7 Front Right & Rear Left
- 2007-2015 Mazda CX-9 Front Right & Rear Right
- 2004-2011 Mazda RX-8 Front Left
Function
This Window Lift Motor takes the drivers input via a switch and sends a power signal to the motor to move the window up or down. The window regulator transfers power from the window motor to the window glass, moving it up or down.
Reference OE Part Number
- GJ6A5958XF
- G22C5958XC
- D6515958XB
- Dorman 742-801
Four Symptoms about Window Lift Motor Failure：
- It takes multiple presses to roll the window up or down.
- Window speed is slower or faster than usual.
- Clicking from the door when the window rolls up or down.
- Power window won't stay up or is crooked.
SgtSlim
Reviewed in the United States on January 19, 2025
Bought because my window was making weird noises. Easy to install.
Jimmy A
Reviewed in the United States on September 9, 2024
Fits perfectly. Installing the motor is fast and simple. Removing and re-installing the door panel, lock cable, door handle cable, courtesy light, speaker wiring is the challenge. Take your time and pay attention as you disassemble the door, takes pictures along the way. Another set of hands is helpful (friend).
Kacie C
Reviewed in the United States on June 4, 2024
Fits my 2010 Mazda Cx9 and now my windows work perfectly fine.
Nicholas
Reviewed in the United States on March 29, 2024
Worked with no issues on a 2011 Mazda CX9. Simple and easy to install.
Bobzinger
Reviewed in the United States on October 30, 2024
It works great...a little noisier than stock, but much cheaper. I just watched a youtube video and It installed so easy.
Jennifer
Reviewed in the United States on September 5, 2022
It works! I removed the door and old motor, and my husband and I were able to install the new motor and put everything back together. However, whatever you do, do NOT push when you're installing the motor. If it doesn't line up perfectly, turn on the car and run the switch (push the window up/down button) so the orientation changes, but do not apply ANY pressure to the female part. Mazda didn't think of putting anything behind it to keep it in place, so dislodging it will move it into the empty space behind the inner door panel, and you'll have to almost completely remove the inner panel to fix it. If this happens to you, do NOT remove both flange type nuts in the middle. Only remove the top one so you can visualize the problem. If you remove both, the glass will no longer be supported and you will have to lift the window manually and tape it into place so you can line up the bolts on the window with the holes on the inner door panel. Long story short, DON'T push on the part behind the motor when installing it. :)
Jeff Flores
Reviewed in the United States on August 25, 2022
So far so good, quality seemed to be on par with the original. Only time will tell. Install is a pain in the butt thanks to Mazda engineering. At first I thought what they did was clever having worked on other vehicles before. But this motor attaches to the inner panel instead of the door frame like other vehicle manufacturers. Making installation a little challenging because you have to attach it to both the panel and door frame. The inner panel does have a provision to hold the motor in place while you screw it into the door frame. However it didn't work that well in my case. So you gotta get one hand behind the door frame and line up and install the motor with the other also making sure the window doesn't slide down the regulator ( I had to use tape to hold the window up).
Justin P.
Reviewed in the United States on October 4, 2022
Installed today October 3rd 2022. It was the right size, hole pattern and had the correct electrical connections. I have been replacing the plastic gear in the motor the past 3 times it had failed, it will start grinding and will have issues being rolled up. I was done with the plastic gear and installed this motor and it fit right up and worked immediately, was able to get the auto function to work on the window as well. Simple job just need a Flat head screwdriver, Phillips head screwdriver and a 10mm socket and it about a 10 minute job. It this motor fails in the same fashion as my last it would lead me to believe the regulator is bad. Great product will buy again if needed.
Recommended Products
$37.80
$ 17 .99 $17.99
$22.99
$ 11 .99 $11.99