High quality. Thick plastic

Very well made and heavy duty but do not go by the dimensions for the measurements because it is not 18 and 3/4 of an inch high it's maybe nine and a half.

The media could not be loaded.

If you're looking for a box for a PCP air compressor this one is exactly the right size nice quality also for the money it'll protect it pretty well from getting damaged put a little foam in there works great have enough room for the hoses the cord and the extra air filter that everybody needs for a PCP compressor setup it's rated for 85 lb so it is way under stressed in this application

Excellent transaction. Quick delivery, excellent packaging and item arrived exactly as described. Allows the best use of room space for my guitars. Love it. I bought several of these and they've ll provided superb storage.

These seem to be the cheapest choice on Amazon for an air-tight container that can fit 3D filament rolls. Each one fits four 1kg rolls comfortably and you can fit an extra two 250g rolls if needed. The removable dividers are a nice addition as well, I found it best to just remove the longer one and keep the shorter one to help avoid having filament rolls start crashing around in the box if it's not full.I wouldn't consider these especially rugged, and the clasps are a bit cheap feeling and can be a little annoying to use, but for the price and considering they'll just be sitting on a shelf, I'm perfectly happy with them.

This is a good deal, I bought mine to use as a battery box for a pair of 50ah lithium batteries for my trolling motor and it's perfect for the job.the box is well made, sturdier than I expected at this price, and is designed to stack, the plastic dividers are pretty flimsy, they pop right out.While the hinges seem very sturdy, the latches are, adequate, and it has slots for a lock that would keep the honest out.The gasket seems well made, I'm not sure how well it would keep water out as is, but with a couple bungie straps around it it should be quite water resistant.Interior measurements in the product description are pretty close, the guides for the dividers do interfere a bit but they could be removed easily with a chisel if need be.

I wasn’t expecting this box to be such good quality at this price, item arrived quickly and well packaged. I would definitely recommend it.

The description of the dimensions for this are weird and a bit convoluted, so here they are in picture form. If you don't intend to store ammo I grabbed a couple 15oz cans for size reference. They fit at the bottom, on their side with about 1/8th of an inch of room at the top and side, I had to pull the dividers out to get the cans out.The seal around the lid seems solid and awesome. With the dividers in it makes the lid rigid and it could probably gently hold about 200lbs, without the dividers in place, I wouldn't stand on the box. I like that you can take out one or both of the dividers and have one big box, two sections, or four sections.Overall it's a bit smaller than I thought it would be just because I couldn't figure out which dimensions were for which axis, but now we all know. It seems like a well made sturdy box. Oh, and the handles on both sides feel comfortable to grab, rounded edges so nothing digs in if you're carrying heavy ammo. I have pretty small hands but the space for your fingers is pretty spacious if you have bigger hands/fingertips.

Great little crate. Very sturdy and has enough room to store a decent amount of stuff, the dividers are a nice little bonus as well.

Caisse utilisé comme boite a outils sur remorque porte scooter 3 roues . Me convenait pour les dimensions et la solidité du produit.

Produit conforme est grand . Après ça a l’air solide mais pour l’étanchéité je n’ai pas testé on verra sur le long terme

After looking at a lot of different moisture tight containers for filament storage, I ended up going with these. They're relatively expensive compared to the more popular containers, and don't hold as many spools, but worth it because unlike those popular cheap ones, these ACTUALLY SEAL. I've been using these for about a year now, and they work brilliantly. Each box is perfectly sized to hold four 1kg spools with a little room on the side for a desiccant box.The problem with the common cheap "weathertight" boxes everyone uses is they all have a slight air gap in the seal along the long axis, because mold-shrink during manufacturing creates a slight bow on the long axis, and the only clasps are usually on the short axis. I looked over a bunch of different "weathertight" plastic bins at different stores, and literally every single container that was rectangular and had clasps only on the short sides had this problem. The larger the container, the worse the issue was. I can only speculate that most people who buy those aren't actually inspecting them, and/or are ignoring such issues because they're cheap.This model of Plano container avoids that via it's placement of the hinge and clasps. The lid seal is well clamped on all sides when closed, with no unclasped areas long enough for the plastic shrinking/bowing during manufacture to cause a gap. Even most other plastic ammo containers you can see here on Amazon have the design problem with clasps only in the middle of the short sides that makes me think they won't actually be airtight.The only flaw these containers have (for my use case) has been the problem others have mentioned with the clips popping off when weight is placed on the lid. This ONLY happens if the lid is lowered with the latches already in a down position, then left loosely closed without actually engaging the latches. This is because the bottom edge of the latches have a squared off profile that will sit flat atop the latch bar, instead of and outward swooping underside edge. If the latches are allowed to rest atop the bar, and weight is placed on the lid, the latches are pushed directly up, popping them off there hinges, instead of simply swinging outward like they would if there was a slant or curve to the underside edge.As long as you remember to either close the latches, or manually swing them out just enough to clear the bar when keeping the lid loosely closed, this won't happen. If the latches are actually closed, they won't pop off, as nothing will be pushing them up (the bar will be above the hook instead of below. I've included a close up pic of the latch so you can hopefully see what I'm describing.Since this flaw is easy to avoid, and this is literally the ONLY box of this size and form factor I could find that is actually properly designed to seal, short of massive overkill stuff like Pelican cases, I don't consider it a big issue.