Your cart is empty.
Your cart is empty.
The ideal pickup choice whenever accurate reproduction of the true, natural sound is required for either reinforcement or direct-feed recording application. Easily mounted to the inside of any acoustic instrument. Fully shielded against hum and retains the natural sound of the instrument free of color or added tone. Furnished with Fas-Jack 1/4" strap button mono jack.
Quality Materials & Components Included:
Pickup/Transducer: Piezo transducer for internal mount with adhesive mounting strip attached
Output Jack: Fast-Jack 1/4" strap button mono jack
Installation Instructions
Preamp: Not included; Not required
Ideal for:
Acoustic Guitar & Classical Guitar
John B. Moore
Reviewed in the United States on November 20, 2024
Great product and great price.
John B. Moore
Reviewed in the United States on November 20, 2024
Great product and great price.
dawg
Reviewed in the United States on December 29, 2017
Just ordered my 2nd one of these. First one went in a Martin D-41. Had it professionally installed in Nashville by a long-time luthier there. He matched it to a Baggs preamp with a simple volume wheel in the bass edge of the sound hole. Simply awesome result. Yes, the pickup is somewhat "microphonic" in that it picks up string squeak and any time/way you touch the top of the guitar, but I play with no pick and a lot of my technique involves various dynamics where I want the pickup to react to what I am doing to the strings and the top. So, for my style, the Insider is perfect! Gonna put the 2nd one in a D-18 and pair it with a Sunrise and preamp them both through a Sunrise SB-2. I'll provide an update when that project complete and tested out.
dawg
Reviewed in the United States on December 29, 2017
Just ordered my 2nd one of these. First one went in a Martin D-41. Had it professionally installed in Nashville by a long-time luthier there. He matched it to a Baggs preamp with a simple volume wheel in the bass edge of the sound hole. Simply awesome result. Yes, the pickup is somewhat "microphonic" in that it picks up string squeak and any time/way you touch the top of the guitar, but I play with no pick and a lot of my technique involves various dynamics where I want the pickup to react to what I am doing to the strings and the top. So, for my style, the Insider is perfect! Gonna put the 2nd one in a D-18 and pair it with a Sunrise and preamp them both through a Sunrise SB-2. I'll provide an update when that project complete and tested out.
Father Time/NORCAL
Reviewed in the United States on July 7, 2016
Had it installed by a luthier on a Martin Backpacker. He had to place it below the strap nut, like a Les Paul. You'll want to use a 90 degree cable on the guitar end. It works well although it does pick up alot of 'string sounds' (like sliding the pick on the wound strings) but I LOVE being able to amp my travel guitar. I've used it with Line 6 150 watt, a Line 6 75 watt, and a Pignose (yes you CAN carry a Backpacker and a Pignose on a Harley! )
Father Time/NORCAL
Reviewed in the United States on July 7, 2016
Had it installed by a luthier on a Martin Backpacker. He had to place it below the strap nut, like a Les Paul. You'll want to use a 90 degree cable on the guitar end. It works well although it does pick up alot of 'string sounds' (like sliding the pick on the wound strings) but I LOVE being able to amp my travel guitar. I've used it with Line 6 150 watt, a Line 6 75 watt, and a Pignose (yes you CAN carry a Backpacker and a Pignose on a Harley! )
jl398m
Reviewed in the United States on February 15, 2013
I installed this pickup and am not happy with the result. As one other reviewer wrote, there are 3 pins on the fas-jac, but only 2 wires to solder from the pickup and the instructions don't provide guidance. So I soldered the wires as best I could tell from product images and tried it. At first I got no sound when going direct to my amp. I was able to get sound if using a pre-amp. The product information claims you don't need a pre-amp.I don't have a problem using a pre-amp, but within 2 minutes of using the guitar, really bad buzzing started, and got worse if I touched the instrument cable at all (where the plug goes into the fas-jac). I know the cable is fine, I've used it with other guitars without any problem. I'm thinking either I installed it wrong, or have a bad jack.I've emailed and called the barcus berry and they have not responded. When you email them, there is a return message saying they don't check the email very often. When I called I got transferred a couple times, then abruptly put on someones voice mail. Not friendly customer service.....
jl398m
Reviewed in the United States on February 15, 2013
I installed this pickup and am not happy with the result. As one other reviewer wrote, there are 3 pins on the fas-jac, but only 2 wires to solder from the pickup and the instructions don't provide guidance. So I soldered the wires as best I could tell from product images and tried it. At first I got no sound when going direct to my amp. I was able to get sound if using a pre-amp. The product information claims you don't need a pre-amp.I don't have a problem using a pre-amp, but within 2 minutes of using the guitar, really bad buzzing started, and got worse if I touched the instrument cable at all (where the plug goes into the fas-jac). I know the cable is fine, I've used it with other guitars without any problem. I'm thinking either I installed it wrong, or have a bad jack.I've emailed and called the barcus berry and they have not responded. When you email them, there is a return message saying they don't check the email very often. When I called I got transferred a couple times, then abruptly put on someones voice mail. Not friendly customer service.....
Tom 21962
Reviewed in the United States on December 15, 2012
I have purchased two of these over the past year.They are easy to install. The rear peg or strap pin is removed and you drill the hole to 1/2 inches.Remove or loosen the strings enough to reach your hand inside and pull the input jack connector through the drilled hole.Place a washer and nut on the jack and gently tighten until snug.Remove the tape from the back of the transducer and place it in position, underneath the bridge.It is very easy to use and works well for small gigs. Just plug in and use the amp controls or your PA system.Best used in low to moderate volumes.Economical and Barcus Berry has been making pickups for many years.A very good choice if you dont want to spend a lot, but want professional sound quality.
Tom 21962
Reviewed in the United States on December 15, 2012
I have purchased two of these over the past year.They are easy to install. The rear peg or strap pin is removed and you drill the hole to 1/2 inches.Remove or loosen the strings enough to reach your hand inside and pull the input jack connector through the drilled hole.Place a washer and nut on the jack and gently tighten until snug.Remove the tape from the back of the transducer and place it in position, underneath the bridge.It is very easy to use and works well for small gigs. Just plug in and use the amp controls or your PA system.Best used in low to moderate volumes.Economical and Barcus Berry has been making pickups for many years.A very good choice if you dont want to spend a lot, but want professional sound quality.
Mike Curl aka RedonKiLaus
Reviewed in the United States on November 24, 2011
I received this item and was so pleasantly surprised it was labeled "Made In The USA" - this was a big plus because I like to buy made in the USA merchandise. I installed mine in an old Applause roundback guitar. I mounted the pickup under the saddle using the double-stick tape already on the pickup. The only issue I had was that the output jack is the kind you can attach a strap to. The pickup has two wires, but the jack has 3 solder tabs. I read the instructions and feel the manufacturer should add a small diagram for soldering. For me this wasn't an issue since I used a Switchcraft 1/4" phone jack. I love the sound and quality and would recommend this pickup for anyone who needs high quality at a good price.
Mike Curl aka RedonKiLaus
Reviewed in the United States on November 24, 2011
I received this item and was so pleasantly surprised it was labeled "Made In The USA" - this was a big plus because I like to buy made in the USA merchandise. I installed mine in an old Applause roundback guitar. I mounted the pickup under the saddle using the double-stick tape already on the pickup. The only issue I had was that the output jack is the kind you can attach a strap to. The pickup has two wires, but the jack has 3 solder tabs. I read the instructions and feel the manufacturer should add a small diagram for soldering. For me this wasn't an issue since I used a Switchcraft 1/4" phone jack. I love the sound and quality and would recommend this pickup for anyone who needs high quality at a good price.
Rene Ron Segura
Reviewed in the United States on October 17, 2011
After trying several other type of acoustic guitar pickups including Fishman and Dean Markley pickups, I decided to try out the Barcus Berry Insider pickup. Mind you, I've never heard of this pickup before. It was so easy to install and I have to say, it sounds FAR better than the pickups I've tried before. It sounds so brilliant, yet natural. I'm very pleased with this pickup and highly recommend it.
Rene Ron Segura
Reviewed in the United States on October 17, 2011
After trying several other type of acoustic guitar pickups including Fishman and Dean Markley pickups, I decided to try out the Barcus Berry Insider pickup. Mind you, I've never heard of this pickup before. It was so easy to install and I have to say, it sounds FAR better than the pickups I've tried before. It sounds so brilliant, yet natural. I'm very pleased with this pickup and highly recommend it.
Douglas Paul
Reviewed in the United States on October 18, 2010
Installing this was a challenge simply because I had never drilled a hole in any guitar I had owned before. The instructions, however, were clear and easy to follow and I was able to install without problem. The pickup was delivered quickly and without damage. Thanks!
Douglas Paul
Reviewed in the United States on October 18, 2010
Installing this was a challenge simply because I had never drilled a hole in any guitar I had owned before. The instructions, however, were clear and easy to follow and I was able to install without problem. The pickup was delivered quickly and without damage. Thanks!
Recommended Products
