Your cart is empty.
Your cart is empty.Product Description
The installation spacing is 1 inch, and the universal design is suitable for all 1/8 inch nail plates
The end of each pegboard hook is designed with a rubber tip to prevent valuable items from falling off and scratching, and to improve the appearance of the pegboard hooks, making them more textured
Pegboard hooks are made of high-quality steel with a galvanized surface that is corrosion-resistant and suitable for 1/8 inch nail plates. They are widely used in various scenarios such as tools, shops, and handicraft organization
pegboard hooks
JCG
Reviewed in the United States on March 6, 2025
Exactly what I was after
Cheryl Atwood
Reviewed in the United States on March 1, 2025
These hooks helped me to organize my workbench and tools for easy access
A. Mace
Reviewed in the United States on February 12, 2025
They are almost perfect. They lost one star because some needed to be bent a little more to rest perfectly unifom but if youhave tools or a solid edge that's a right angle to give them that extra bend they work just fine
Darth Steampunk
Reviewed in the United States on January 22, 2025
Got these for my metal pegboard. They fit perfect, hold weight well, and I can fully fill my board with them. Simple but totally effective at making my workshop look super cool and organized. Definitely recommend these!
Dakota Kieras
Reviewed in the United States on January 18, 2025
They are wanting that round stock but fit both 1/8 inch and 1/4 inch I have 1/4 inch so they wobble little but I have used them before and it’s good enough for me. I’m not that anal! 😆
TSam
Reviewed in the United States on December 7, 2024
These hooks are amazing and tough. You can hang anything on them. I originally bought these so I could hang my jewelry card stock on them but ended using them to hang up everything else too. Craft bags, gift bags, ribbon spools, etc! Ease of access and the plus is, I know where everything is!
Dave K.
Reviewed in the United States on October 17, 2024
First, to the many reviewers that have complained these hooks do not fit their ¼ inch thick pegboard – read the product description. The seller clearly lists these hooks as being for 1/8 inch thick pegboard. Nowhere is it claimed these are suitable for or can be used on ¼ inch pegboard. While these hooks may not be perfect (see below), it is more than a little disingenuous to ding a product for not working in an application that it was never intended for.At their current price they are about 25 cents per. This is far better than anything I can find in my local big box home improvement stores, chain hardware stores, or HF. There is no question they are intended for light duty given the wire measures at only .122 inches thick. While advertised as being 4 inch hooks, that is gross length including the mounting – the effective length that can be used is approximately 2.5 inches.As noted, they are intended for 1/8 inch thick pegboard. They will fit 3/16 inch thick board but used in such an application the hook will not be at a 90 degree angle to the wall. I measured it at a 17-18 degree upward slant. Of course you could bend it to sit at 90 degrees if that is what you want.No defective or misshapen ones in my box of 25. All had solid welds and the chrome plating was even.Overall, I would say these hooks are more hobby/craft room grade than shop/garage grade. But then again, so is 1/8 inch thick pegboard (at least the hardboard variety – metal is a different story). I would trust them for modest sized wrenches, rolls of tape, and similar but would be leery of something like a pipe wrench.To sum up, from a quantity/price standpoint they are a good value. If used appropriately as designed, they should meet your needs unless you are trying to hang unusually bulky or heavy items. A solid four star item.DISCLAIMER: I am a member of the Amazon Vine program. This means that I receive some products free of charge to use and review. I only request/accept items I will actually use. My reviews are based on this real-world usage – they are not mere regurgitations of the Amazon product description or insincere hype. I am not a shill and I do not consider the fact that an item was provided without charge as part of my ratings. I have given Vine products one star, five stars, and all points in between. A defective, incomplete, dangerous, or fraudulently described item gets 1 star (zero is not an option), a below average product 2, and an average product 3. You have to earn a 4 or 5 star rating. I put serious effort into my reviews and they represent my honest opinion of the product. My hope it they will help someone make an informed, educated choice whether or not a product is right for them.
Sierra Fan
Reviewed in the United States on October 12, 2024
While these hooks do seem to be strong, they will not work with standard 1/4" pegboard as you can see in the first attached image. They simply do not go into the pegboard far enough to allow them to tilt down into position like the standard hook shown next to them. I was not willing to tear up my pegboard by trying to force them into the standard 1 inch wide holes.Also, while these (technically) are "4" hooks, that includes from the very back of the hook all the way out to the rubber tip. The actual useable length is only 2.5 inches as you can see from the second image. Even if you could get the hooks into some other type of pegboard you don't have 4 inches to hang items.I actually ordered these because I liked the rubber tips compared to my current peghooks that don't have that feature. But if I can't insert the hooks into my pegboard, the rubber tips are meaningless.I will say that my star rating would jump from 1-star to 5-stars if the hooks actually went into standard pegboard because they do seem sturdy. The metal is not flimsy at all. And I like the galvanized look. But if you have standard 1/4" pegboard, these will not work as the images show.
Recommended Products