Pack of 4 OMRON D2F-01F Microswitch SPDT Subminiature Compatible Mouse Switch

These seem to be the legit switches found in the Logitech gaming series. I've been using them for several years now, still holding up great. Soldering isn't too hard, and I've been using the same mouse with 2 sets of switches for gaming for over a decade now.

Legit. Work great. I really like the tactile click and weight of these switches. Not quite as spamable as a softer switch. Do yourself a favor and pickup a solder sucker to de-solder the pins/legs when switching these out.

These were used to replace the switches in my corsair mouse. They work as intended. Buy more than a couple if you want to find two that click the same.

Logicool ANYWHERE 2Sの左スイッチに使用しました。シングルクリックがwクリックになる症状がなくなり快適です。

logicool m585のクリックの反応が悪くなった為、そのスイッチ交換のために購入しました。元々ついていたスイッチはD2FC-F-7Nでしたが、同じ製品はネットでは手に入らなかったため、このスイッチを購入しました。このスイッチでもクリック感など特に問題もなく、代替として十分に使えました。

The switch works really well in a G Pro SL, however 2 of the 4 switches I have put in there began to double-click within a week or two. Even though the plunger on the switch is higher than the standard, it was very apparent that it was not the cause. Great switch, varied longevity. A lot less luck involved in trying other switches, but if you really wanted to try these: they are worth trying.I also tried using these in a ZA13-C and they have nearly zero pre-travel, but a lot of post-travel. Not good for clicking fast, but was still fun to experiment with because of how light the switches are.

This saved my three Logitech M570 trackball mice. Very nice switch that the mouse in effect should have been come out with in the first place.

Harder to click than the original D2FC-F-7N in my Logitech Ball Mouse. However, the lifetime of this switch is expected to be greater.I've gotten used to it but just keep this in mind when buying.

Great to replace these buttons on the mice with double clicking problems.I saved three doomed mice with these(Roccat kone, Steelseries Kinzu v2 and Razer Mamba)OEM uses not so durable, or poor QC control Chinese switches which start giving double clicking problems later in their life.(Prolly to save costs)Getting the mouse replaced, doesn't solve the problem as it will have the same crappy button, destined to fail down the line!This, however has good reviews and commended for better QC checks, which makes sense as they are made in Japan(home of OMRON)Installation requires desoldering the previous button and soldering this on. Its not so hard to do it yourself!I think, some ASUS mice come with some kind of sockets for easily replacing these buttons!

I have a Logitech G500 mouse that's been registering double instead of single clicks. I couldn't even click and highlight text without it "letting go" of the highlighted area. It's been driving me nuts. Otherwise, I like the feel and specs of the mouse, but this problem is well documented in various posts and on YouTube. This fix works. There are videos on YouTube that detail how to take the mouse apart. Don't try to just take it apart without viewing the videos because the parts are easily damaged. There's only one way to disassemble the mouse so that you can lift out the board to desolder the old switches. Be sure to mount the new switches down tightly to the board. To remove the old switches I crushed them first with pliers because it's nearly impossible to completely remove all the solder from the 3 posts so that the switch can be easily removed. Once I crushed the old switches I used small side-cutters to cut the remaining piece into 3 separate pieces that would just fall out individually when heated. You can use a soldering wick to remove any solder that may have smeared on the board or is blocking the mounting holes. The procedure went really fast when I used this method to remove the old switches. There's a 3 part video on Youtube that shows how to disassemble the G500 mouse that will help you get to the switches. The video doesn't cover how to remove the switches or solder in the new ones. I just know how to do that. Good luck.The Youtube video is titled: HD Logitech G500 Usb Cord fix/ Disassembly part 1

I have Logitech Performance MX mouse http://www.amazon.com/Logitech-Wireless-Performance-Mouse-Mac/dp/B002HWRJBM/ref=sr_1_1?ie=UTF8&qid=1422251355&sr=8-1&keywords=logitech+performance+mouse+mx that I bought from Best Buy for $99.99 back in 2012. I love the ergonomics of this mouse but I hate the left and right click micro switches that this mouse comes with. Those are Omron D2FC-F-7N Made is China. Left click started double clicking after a few months of usage and most of these mice are shipped with this specific cheap Chinese made Omron. Well, I love logitech for their customer service and this mouse because it can perform on almost any surface (dark field technology is what logitech calls it). I called logitech and the RMA process was super fast and super smooth. They sent me a new mouse, but same thing happened after a few months. I opened the mouse, fiddled with the switches and somehow fixed 'em and the mouse performed very well for a few more months.Now, in 2015, left micro switch again started double clicking and I opened the mouse body again to try to fix the thing. But this time, I broke the left switch. I was like "dang it - I gotta buy a new mouse". Then I started thinking rationally and would think like "what are my other options"? First, I was looking at simple solution to buy Logitech G700S. But again, I loved my mouse. Then, I wrote down the micro switch number and tried here at amazon. I found it http://www.amazon.com/s/ref=nb_sb_ss_c_0_9?url=search-alias%3Delectronics&field-keywords=d2fc-f-7n&sprefix=d2fc-f-7n%2Celectronics%2C149&rh=n%3A172282%2Ck%3Ad2fc-f-7n . But then those were same Chinese made cheapo switches. I knew they would give me same headache. Then I found Omron micro switches D2F-01F which are Made in Japan for two more dollars I would still get 4 switches. "Hmmm!" I said to myself, I didn't have no soldering experience and no solder iron either. Well, here is what I did. I ordered these Omron Japanese switches, along with Hakko DASH Soldering Iron, 25W which was a super pleasant surprise for me because that solder iron is also made is Japan and is a very good quality. I also ordered Alpha Fry AT-31604 60-40 Rosin Core Solder (4 Ounces), which turned out to be a good quality as well, and I ordered Blue Sucking Vacuum Desoldering Pump Solder Sucker Remover Tool.It took me almost forty minutes for the complete process of opening the mouse body and taking out the mouse board to desolder the left and right click switches and solder the new ones to put back everything together. (Mouse feet were totally done for since I had opened the mouse for several times. More one that later). When I put the battery back and turned on the mouse, I was like "O-M-G". It was totally like a new mouse under my hand. And the click sound and the way the micro switch pushes back the click button is totally different than the original micro switches. I was and I am totally happy with these Omron Japanese model micro switches. Five Star performance out of five stars! And, on top of that, I have made two soldering and desoldering tools along with two back up switches.Next problem was that all the three mouse feet were done for. I again sat for a while and thought about it. Here is what I did. I cut and stick five folds of a duck tape for each mouse foot and then used a sharp pair of scissors to give a good shape. Then I used two tiny droplets of Loctite Super Glue to stick those tape feet to the mouse body (Caution: Please do not drop super glue on the screw heads or screw holes while putting duck tape or electric tape or whatever you choose to use the baseline for the mouse feet.) After that, I cut three hard plastic packing material pieces to use as the actual smooth feet for mouse. I filed them too on all the sides and then stuck them on the duck tape feet with the same super glue and my mouse has super smooth feet as well. As a side note, I must tell you that I have personally tried several times and with several different mice the same duck tape and plastic feet experiment and whenever you want to rip open the feet to get to the mouse screws, the duck tape will be so easy to remove even when you have stuck it with super glue.I highly recommend these Omron japanese micro switches over the Chinese made switches. Thanks Amazon :)