Your cart is empty.
Your cart is empty.4.2 out of 5 stars
- #169 in Computer Networking Wireless Access Points
Product Description
Key Features
CPE300 is a long range high performance 802.11ac outdoor CPE with 300Mbps data rate. Comply with IEEE 802.11b/g/n/ac standard, 12dBi dual polarized high gain antenna, the PTP/PTMP distance is more than 3000 meters.
It support Wireless AP, Wireless Bridge operation mode for PTP/PTMP connections, with operation switch on device, easy to setup CPE300’s operation mode, no need to access into GUI, avoid the complex setup program, then simple to view the signal strength by LED signal lights, save much human work and cost, make the long range wireless coverage, data transmit and wireless monitoring simple and professional.
CPE300 with ABS waterproof, dustproof and sunscreen shell, temperature adaptive also; Meantime, it support 24V PoE and DC input and surge protection, ideal for outdoor use.
Please note that it is not a wifi repeater directly, the main bridge needs to be connected to the upstream network through a network cable, the master and slave bridges are transmitted through wireless signals, and the slave bridge can be accessed through a network cable or wifi. It can also be set to AP mode and used alone for wifi access, which needs to be set in the web management interface
Fast Pairing Method
One to one pairing method
1. Dial a bridge to "M" and another bridge to "S".
2. Short press "Dig SW/ Reset" button, each digital tube value will add one (0-9-A-F cycle).
3. The paired bridge is set to the same value and can be paired successfully.
One to multiple pairing method
1. Dial a bridge to "M" and the other bridge to "S".
2. Short press "Dig SW/ Reset" button, each digital tube value will add one (0-9-A-F cycle).
3. The paired bridge is set to the same value and can be paired successfully.
2.4GHz Frequency and 1KM PTP/PTMP Distance
CPE300 with full frequency of 2.300GHz ~ 2.4835GHz, more than 50 channels available, it avoid the frequency interference problem, the PTP/PTMP distance is more than 1000 meters, full meet with data transmission in fast speed, low delay, high stability requirement in wireless security or data transmission.
LED Display and Button Press to Bridge.
With visible LED display to show channels, then with M/ S button, press it to the same value for quickly point to point and point to multi-point wireless connection, simple to install and degu, cost saving.
One to multiple Point Connection
One to multiple point connection allows users to connect multiple wireless bridge together. As such, two or more locations are able to use multi bridge in order to share a single internet connection, which can allow them to share data across that shared network.
Web Management
You can easily use the web interface to set up the network, wifi, to meet your personalized needs. The default IP is 169.254.254, the password is 88888888
IP65 Outdoor Water-Proof
CPE300 with ABS waterproof, dust proof and sunscreen shell, avoid the damage from dust, thunderstorm weather. Meantime, it adaptive to various environment, the working temperature can be normal at -40℃ to 55℃. Suit for any country.
PoE Powered
CPE300 has integrated passive 24V PoE, for easy installation and lower cost. It can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
KVE
Reviewed in the United States on August 5, 2024
Bought a pair for remote control of two telescope mounts during the eclipse; this wireless bridge got it done. While you do require relative LOS, at closer distances significant throughput (Mind you, this is only 100Mbit optimistically, closer to 70).The kit comes relatively complete, and while the documentation is definitely lacking, you should be able to get it figured out for your use case fairly fast.
Metal1905
Reviewed in the United States on August 13, 2024
Easy setup, use it for enternet in another building 300' away. Great speeds,
Richard Zink
Reviewed in the United States on June 9, 2024
Pretty much just put the two in the modes they need to be in andthey work.... You will need a "point of access", "Router" unless you go directly toa device. Point to point works great !!! Really easy. The hard part is the "Router"...That's just a matter of knowing what password they are looking for to connect.So even that no biggie.
Sam
Reviewed in the United States on February 11, 2024
I plugged everything in and it just worked. The documentation is a little inconsistent and not the clearest. Just switch one unit to M, the other to S.UPDATE: I had previously suggested replacing the PoE injectors with gigabit ones to get higher speeds - the bridge units themselves advertise up to 300Mbps. I replaced them for unrelated reasons, and my switch still reports only a 100Mbps link. So that effectively caps the bridge’s bandwidth. Not a problem for me and everything works great up to that capacity, but if you want more speed you’ll have to pay for it.
m.k.
Reviewed in Germany on December 7, 2024
Konfiguration ist etwa knifflig, aber dann hält die Verbindung sehr stabil im Freien.
Ben Trudo
Reviewed in the United States on December 21, 2024
I've been using them now for about 2 or 3 months and have been Flawless since the day I set them up.
Michael Dalton
Reviewed in the United States on November 26, 2024
I have set up many routers and other point to point devices; this has to be the easiest! Set the one on your network to M (Master) and the other to S (Slave) point one at the other and it works, no more headaches trying to set up the domain, IP addresses etc. The slave end (remote end) will have your cameras or other network devices that you want connected to your main router. I have 3 IP cameras and a PoE switch on the remote end. I connected an old laptop to the network with the cameras operating and get between 55Mbs to 75 Mbs. We had rain and freezing temperatures and it worked flawless.
A.V.
Reviewed in Canada on November 20, 2024
The buried network cables to my detached garage were damaged, so I bought a pair of these to get me by until the cables can be re-run. I was expecting to encounter issues or glitches at this price point, but they've actually been working perfectly.Setup was super easy, although I did elect to log into the web UI and set my own password for the WiFi AP, which was also easy.I was only able to get 3/4 (like maybe -68dB) signal with the positions I chose to install them, but that isn't surprising as there were a few obstacles in the way, one side is not mounted perfectly vertical, and this is only the 2.4G model. Still, I'm getting very reasonable speeds (roughly 80mbps), so I'm not going to complain.They've been running reliably for a couple weeks so far.
Katia Petitto
Reviewed in Italy on October 23, 2024
Benchè restituito per problema risolto con cavo, il prodotto è già in uso ed è PERFETTO, mai una caduta/perdita, si configura in 2 secondi e potrebbe fare NON SOLO da bridge ma anche da AP (non testato)
Yann M.
Reviewed in France on January 15, 2024
Je les ai mis à l'intérieur, donc sont séparés par des murs (en pierre de 60cm d'un côté, parpaing de 20 de l'autre), et les 2 bâtiments séparés de 20m. Le signal est très bon, ça permet de faire passer le flux de 4 caméras HD à 30fps sans souci.
PABLO
Reviewed in Spain on April 21, 2024
cumple su cometido, perfecto
S & J
Reviewed in the United States on July 20, 2023
Used this system to make a homemade long range target camera system. Plugged them in and they were working in seconds. Have tested it to 200m so far without any issue. Just make sure they are aimed pretty well without obstruction.
Dash
Reviewed in the United States on October 24, 2023
Loved it.. worked great. Put master on the main building and set other to slave... with a clear line of site, it worked right away!
Recommended Products
$350.10
$ 99 .00 $99.00