Your cart is empty.
Your cart is empty.4.2 out of 5 stars
- #37,871 in Musical Instruments (See Top 100 in Musical Instruments)
- #44 in Recording Studio Racks
Secure. 12-space rack organizes, protects, and provides ease of access to rackmount effects, signal processors, amps, power conditioners, and storage drawers totalling up to 12U. Strong. Steel and laminated-wood construction delivers outstanding strength, stability, and balance for reliable support of up to 200 pounds of rackmount components. Professional. Durable black metal finish resists chips and scratches to stay looking new while unobtrusively blending into any stage or studio setup. Includes 48 matching black Phillips-head rack screws. Versatile. Serves as a standalone rack or as a matching extension of the On-Stage WS7500B Workstation or WSC7500B Corner Accessory for scaling up as a studio grows while maintaining a professional presentation. Convenient. Rolls on removable casters making it easy to reach the connections at the back. Two of the casters lock to hold the cabinet safely in place. Also includes nonslip rubber feet for long-term placement.
A. Bryant
Reviewed in the United States on February 20, 2024
I purchased this because I am running out of rack space on my studio desk. This thing is sturdy as heck! It adds a nice little touch to the studio. I love that it has wheels so I can easily roll it out to adjust cables, troubleshoot or clean under it.I would pay attention to the size because it's bigger than I anticipated but luckily I have enough room in my studio.
Cliff
Reviewed in Canada on January 3, 2024
It is good for me to have my equipments (mixer, wireless microphone receivers, in-ear-monitors, etc.) on the rack, but I have to think and work hard to manage the cables.Recommend adding some design elements for cables.
Geoff G
Reviewed in the United States on April 10, 2024
I purchased the On-Stage WS7500 Rack here from Amazon. The screws will not go into the left panel (Panel labeled B) The screws fit fine on the right side and even fit the On-Stage Table-Top rack that I have. When I say the screws won't go in, I mean even with a power drill. The rack thread holes are just not correct on that one panel. I've also tried different size rack screws and nothing fits. Not sure what happened during manufacturing on that panel. I've contacted On-Stage support to see if they will just replace the one panel.
JN
Reviewed in the United States on February 28, 2022
I was Really pleased with how easily this went together and how nice it looks with my gear inside. It’s the perfect size for my space and is very sturdy.
Dean A.
Reviewed in the United States on August 20, 2020
This rack desk was easy to assemble and came with rack hardware for adding rack units to the frame. I love the big desktop on top, it was a perfect addition. We use it in a multipurpose room at our church, it is a perfect fit.
SailBobo
Reviewed in the United States on June 28, 2020
I bought this cart to use as a mobile audio cart. It is sturdy, easy to assemble and overall I loved it, until I tried to roll it around to different places. The wheel structure that comes with it is completely inadequate. First, the wheels. The ones that come with it are tiny plastic little things. That wasn't the biggest problem though, because wheels can be changed. I bought these these wheels as replacements (the bolts they attach to are M8-.125 threads by the way):https://www.amazon.com/gp/product/B083R1DSFQ/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1It was too late. The real problem was the mounting structure. The bolts that the wheels screw into are only brazed on two sides, not all the way around, and steel that the bolts mount to is too thin. The sideways force of the offset wheels bends the metal and the wheels fold over, breaking the bolt welds. We were able to modify the cart to reinforce the wheels so that we could use it as intended. We had someone braze the bolts all the way around, and we then put a square steel plate steel inside the legs to reinforce the steel that flexes. You have to drill a hole in the plate, then you can put it over the wheel stud inside the leg and use a bolt and washer to tighten the plate down to reinforce the steel at the bottom of the leg.In conclusion, I love almost everything about this cart except for the wheels ... We use it at a church and we've mounted all of the pastor's wireless mics to it, put a mixer on top, and mounted a power amp to it ... We can roll it anywhere, plug in two PA speakers, and have a mobile wireless audio station we can use anywhere, indoors or out.You could probably get by without brazing the wheel bolts all the way around if you immediately buy new wheels and reinforce the metal at the bottom of the wheels. That would make it an almost perfect cart.
Esldude1
Reviewed in Canada on February 14, 2020
Very nice stand for the price. Only minor quibble is screws for the compnents are not long enough for thicker faceplates. Pretty minor issue. Solid and easy to put together
John Falsey
Reviewed in the United States on November 5, 2020
I bought this to remove the clutter on my desk. This fit perfectly underneath my desk without casters. Feels wobbly at first but once everything is snugged up and together it feels pretty sturdy. I had a scuff or two on the inside panel of mine, however it wasn't bad enough for me to want to send it back. Overall I think its a great purchase if you need a rack for audio hardware, as other brands are a lot more expensive for pretty much the same thing.
donna c
Reviewed in Canada on January 30, 2020
easy to put together sturdy nice size table looks great
jb512
Reviewed in the United States on January 23, 2020
I wasn't sure what to expect, but knew there would be some wear or tear. When I got the package it was in horrible condition lol.... I expected that in a way, but it looked far worse than I had imagined it would be. But when I opened the package, everything was there. All the bits and pieces, all the screws, the casters... All there and secured inside a ziplock baggy. There were minor scuff in various places but who cares? lol Scuffs are irrelevant for my purposes for this unit. One of the two black side panels did have a significant piece broken off, but a little wood glue and a couple of clamps got that sorted quickly. I assembled the unit and it's been excellent. Holds me music production gear like a champ (even my 3u computer case). I would highly recommend this little guy here. It's convenient, affordable, easy to assemble, totally worth the money. I will most likely buy another one in the near future as my list of gear increases.
Red Shed Records
Reviewed in the United States on August 19, 2019
This rack worked perfectly for my setup. Goes together easily and quickly and is very sturdy. The included optional wheels are a nice addition for making the rack easy to move when you have to get behind it in a small space. Great value for the money!
Andrew
Reviewed in Canada on July 8, 2019
Had this unit for about 2 months now. It is sturdy and holds units well.Very affordable.I like the option to mount wheels to the unit (comes with package).Only issue is the top workspace table scratches easily, so I’m thinking of laminating it.
Rami Azer
Reviewed in Canada on May 15, 2019
Used these in a recording studio setting to Rack my gear - they’re exactly what you would expect, they do the job and they feel solid.
Recommended Products
