Your cart is empty.
Your cart is empty.Product Description
Revive your electronics by spraying BW-100 Electronic Contact Cleaner.
Were you annoyed by the oily touch after spraying other lubricant base ECCs in the market?
Were you worried that the spray would harm the plastics or rubber of your electronics?
Well then, BW-100 Electronic Contact Cleaner is the best solution for you!
BW-100 ECC cleans sensitive electronics and electrical equipment quickly and easily.
Removes oil, grease, dust, and other pollutants on contacts without leaving any residue.
BW-100 ECC uses 4th generation halogenated solvent HFO-1233ZD as a main ingredient
a zero ODP solvent with an extremely low global warming potential. It is also non-flammable!
BW-100 ECC will work as an easy and efficient solution for your electronics.
*NOTE 1: Before using the product, Please follow the cleaning guide provided from the electronics' manufacturer. Specific cleaning requirement may vary by items. Please check before use.
*NOTE 2: Contact cleaner is NOT an air duster.
Safely Use
- Zero Ozone Depletion Potential (ODP)
- Zero Volatile Organic Compounds (VOC)
- Extremely Low Global Warming Potential (GWP)
- No HCFCs, No HFCs included
- NSF K2 listed Reg #159245
Ideal Use on
The BW-100 Electronic Contact Cleaner comes in 3 different sizes of aerosol cans. 4oz, 8oz, and 16oz targeting users with different needs.
Evaporates immediately without leaving any residue.
Spray to fix joycondrifts, computers, controllers, amplifiers, pots, and more.
User-Oriented
- Does not contain any chemicals of Proposition 65
- Non-flammable
- Quick Evaporation
- Straw for pinpoint spray
HOW TO USE
Step 1
Can be used on electronics with and without power.
Shake BW-100 can before use.
Step 2
Attach extension straw for pinpoint stream. For wide angle, just press trigger
TIP! To tightly insert the straw, carefully wiggle the straw into the spray nozzle until it fits.
Step 3
Hold BW-100 away from the surface and spray directly where cleaning is needed.
Step 4
Let the solvent dry completely.
It will be gone almost immediately.
Kerry
Reviewed in the United States on February 9, 2025
My phone got terribly soaked and the cleaning power of this spray is very good. I disassembled the phone sprayed out the logic board and the phone came on. Thank you
Andrew
Reviewed in the United States on February 27, 2025
Recently been watching electronics repair YouTubers and saw this product. Decided on a whim to try it out as I had some controller joysticks to clean and it was a bit of a tight spot. Sprayed it and it worked wonderfully! I definitely prefer this over isopropyl alcohol just for it ability to get into hard to reach places and I don't have to worry about it lingering, as it evaporates VERY quickly!
Ken
Reviewed in the United States on February 27, 2025
works on my game controller sticks, also use it to clean contacts when my alkaline batteries leak in my clocks D:
Brandon Bates
Reviewed in the United States on January 31, 2025
Works very well. Had some stick drift and sticky buttons. Open controller and sprayed this product and they are working great again. Cleans well and evaporates pretty quick also.
Jay R Little
Reviewed in the United States on January 28, 2025
Buyer beware super small bottle!
Jennifer Andrews
Reviewed in Canada on July 22, 2024
I buy these for my cousin as a gift as he's very into computers and fixing computers and he swears by this product and it being the best for your computer
TheDreamSlayer
Reviewed in the United States on March 16, 2024
Works great and does what it is meant to, very helpful for electronics but think the amount it offers is very little if you wan’t to use it constantly
KMTW
Reviewed in the United States on December 23, 2024
I have used this for years and never fails to get the job done.
Josue Rodriguez
Reviewed in the United States on July 5, 2023
I bought this because I saw a repair video on youtube showing how this can be used to fix stick drift on Playstation, Xbox, and Switch controllers. And it worked like a charm. All you need to do is dismantle the controller and spray the fluid directly into the analog sticks and swirl the stick in a circle, up, down, left, right for about a minute. I sprayed and moved the stick for about 15 sec before spraying again. I wasn't sure how much would be enough so I did it four times. And bam, stick drift is completely gone. I recommend buying the smaller bottle. It wasn't available when I bought this,16oz is way to much for someone who isn't constantly working with electronics, but regardless, it was worth every penny.
Recommended Products