Your cart is empty.
Your cart is empty.Product Description
Nilight 4.8Inch 20W Flush Mount LED Pods with Amber DRL
LED Power: 20W/PC Raw Lumen: 2510LM/PC Effective Lumen: 1786LM/PC Beam Type: Spot Beam
Lighting Performance: 232Meter@ 1LUX, 10Meter@540LUX Beam Angle: 10°Spot
Operating Voltage: 10-30V DC Color temperature:5700K Operating temperature: -20℃～+45℃
Lifespan: more than 50,000 hours Certifications: CE, FCC and RoHS
Upgrade the light to save your way in the darkness, rain, and foggy weather
John Doe
Reviewed in the United States on June 5, 2025
Nice lights, way heavier and larger than I thought. They are definitely a welcome addition to my arsenal. Gotta find the perfect spot to install them. Cant wait!
Nick
Reviewed in the United States on June 3, 2025
In typical Nilight fashion, this is another superb set of lights. The wiring harness and switches are well made and make for an easy installation that even a beginner should be able to figure out. The lights themselves are bright and durable, and the amber DRL adds a nice touch. They are perfect for off-road driving and add excellent visibility to my truck. Highly recommend if you’re looking for reliable and easy-to-install lighting!
Al H
Reviewed in the United States on April 4, 2023
There is a great set of fog lights. Super bright, they come with everything you need to install them. The toggle switch lets you select between modes. The wire harness is nice and long and you should be able to put the switch anyplace that you would like.The only question is how long will they last in the tough MN winter.I will post a follow up later
E. J. Hunyadi
Reviewed in the United States on September 27, 2022
These are bright and high-quality flush-mount LED pod lights. I bought them expecting to be able to mount them to use as pod lights on my vehicle's hood, but this isn't possible for two reasons:1. It doesn't come with the hardware to connect to a bracket or mount2. It has a wide face with holes for mounting flushI will be finding an use for these LED pod lights, as they are very bright, compact, heavy, and of high-quality. I have another Nilight product on another vehicle, and it's been performing flawlessly.This unit comes with its own harness and relay which is a great deal. I've purchased other pod lights in the past that did not come with a harness or relay and that is a hidden extra expense that this light does NOT have.
xyborg_
Reviewed in the United States on November 30, 2022
lights are bright and can be easy to install depending on location. I own a pickup and i cut holes in the rear bumper for these for reverse lights at night(live in dense woods). The bumper cutting was pain but has nothing to do with the quality of the lights. if i need more light in the front i will definitely purchase these again.
So many reviews
Reviewed in the United States on November 18, 2022
bright even beameasy to wirelow draw for a very good outputflush mount means you need a good spot for them and a clean holeback spacing is a bit deep so check your measurements
Utah mom
Reviewed in the United States on November 13, 2022
These flush mount pod lights are surprisingly nice! They come in a well protected box. The pods are built well with strong metal and a nice coating. They are very bright! They include the connectors, screws, wire and switch. While they include the template for mounting, they do not include a gasket that would help make it more waterproof. My only other complaint is the switch feels cheap and making a rattling noise, but won’t be that much of an issue as I’m planning on using a different switch.
Customer Review
Reviewed in the United States on October 15, 2022
I have had a set of no-name brand of flood lights flush mounted in holes cut in my Jeep rear bumper that I use as auxiliary to backup lights. In the back they are also are effective as work lights.I got these Nilights to replace those cheaper brand since I was getting condensation in one.Now for my use, these Nilights were not great. The Nilights are better quality all around, from internals to finish. These are part of the "Nilight Pro" line and very high quality. But this model pair are very narrow spot lights and hence not great for aux reverse, and certainly not for auxiliary reverse on an off road trail or overlanding. As in those cases you are backing very slowly and want a broad/flood type light. In reverse you don't need the kind of spotlight reach one would want as a supplement to headlights for going forward direction at 40mph. Also the narrow beam is not very amenable to use as a work light.Nilight makes mostly combination flood and spot, but this is just spot.So these are best if used in front for spot driving lights for longer reach, or its nifty driving lights feature, and where a flush mount works. Since they are not inherently adjustable, and you want spots to be able to be adjustable to even fine amounts of degree, I suggest if you cannot get behind easily for nuts and bolts and washers, that you do not use pop-rivets as fasteners. Instead use riv-nuts. By using accusable bolts or riv-nuts you can loosen and then shim with slim pieces of plastic from something, between the faceplate and the bumper or other mounting surface and rough and fine tune aim of these.I did not check electro-magnetic interference (EMI) since I just rough fit these in existing identical hole to see the spot and put 12 volts in from my hitch harness to check beam. But Nilight in generally, and especially its "Pro" line are known to not generate interference into your radio or other lights as some other brand LED pods and bars do. With these you get full kit for flush mount including stencils, bolts (again if access to rear of mount area is difficult, use riv-nuts) and harness. These also have nifty driving lights integrated (hence the three leads).
Recommended Products