Your cart is empty.
Your cart is empty.RR
Reviewed in the United States on February 9, 2025
Item is pretty much as described, although it is supposed to be 24 inches wide and is only 23 3/4. Important if you need it to be a full 24. Adhesive appears to be holding and insulation properties are pretty good, but the foam side is not very durable and is easily scuffed/torn. Came in a roll that was doubled upon itself at the center, and this portion of the foam will not lay flat, even after pressing it and reverse rolling it.
Karim
Reviewed in Canada on February 6, 2025
Isolant polyvalent.
PCJF
Reviewed in Canada on February 28, 2025
It doesn't go on pretty, but it works. The neoprene here is very thin. I think it doesn't offer much protection or padding, just the minimum. I got it to stick on a medical device to give me some grip. For this purpose it worked ok and did provide me some grip, though not as much as I had hoped. The not pretty part, is because after I stuck it on the neoprene was all pitted and rough looking. It's not the most dense neoprene out there.Thankfully the backing for the sticky side was easy to remove. I've had some sticky foam pads where the backing was impossible to remove so I appreciated the Storystore backing came off easily. The glue is also decent but I did have some of the edges lift up a little, which required me to press and hold them down a little longer. Only time will tell now whether the glue lasts.Overall, I would say these are 3.5 stars, but I rounded it to 4 stars as the neoprene was what they described (for the thickness). If I were to order again though, I would probably try and find some that is denser, which should stick on nicer looking, and maybe provide more protection too!
Layci
Reviewed in the United States on February 27, 2025
The quality was great and durable kinda hard to cut but not to hard but there was a sticky part on the back where the silky part is but it’s perfect when I don’t want to get my glue gun out would recommend buy and I am satisfied
Brett G.
Reviewed in Australia on January 6, 2025
I don't know what others received, but what I got was ridiculously bad, and not fit for service. I was expecting sticky back neoprene the same as wet-suit material but what came can be rubbed off with my finger, leaving the glue sheet behind! One pic of the white shows what happened with an overnight bag put in and out 2 times. Another pic shows the deformation from my elbow after 6 hours of driving. "Will not deform" HAH!They even say you can put it on your boat deck and walk on it. I'd like to see that!Buy this if you are looking for a headache! I can see no purpose for this product whatsoever.
Ellen P
Reviewed in the United States on January 31, 2025
I covered the inside of my door to the backyard which radiated cold air. Works perfectly. Now door is warm to the touch.
Thomas Loughran
Reviewed in the United States on January 22, 2025
It is pretty sticky.you need to really line up we’re your going to stick it or it’s going to be a bit of a problem.We will see if it remains All in All seems to be a pretty good product.
Robert Adamson
Reviewed in the United States on January 14, 2025
Applied this as insulation and sun block aboard our sailboats companionway door...2 years later, still in great shape
Eli
Reviewed in the United States on January 14, 2025
used for multiple cosplays and held up for 10 hours days of sweat and rubbing 10/10
Robbin L
Reviewed in the United States on July 28, 2024
After reviewing numerous types of replacement insulation for the inside of my air handler I chose this neoprene insulation. This neoprene insulation rolls out nicely, is easily cut to length or shape and it provides an excellent insulation barrier. I have had it installed for more than 6 weeks and no more air handler “sweating” (condensation dripping). In addition, this insulation does not deteriorate in water. Great product.
glenn
Reviewed in the United States on February 28, 2024
It's a simple matter of measuring and cutting with scissors to get the right sized piece. Getting the waxy paper off is a little tricky because you don't want to touch the adhesive surface with your Big Greasy Fingers. Just pick-off a corner and pull it part-way leaving the rest of the strip covered. Then start your assembly by pressing the sticky part with the rest of the (covered) strip aligned in the right direction. It helps to have a solid surface and the parts that you're putting together held down with clamps or weights. Then pull the rest of the paper off the sticky surface and press down as you go. This is a coordinated action, but after you've done it a couple of times you'll have it done in a professional way.The glue is strongest if you really press it down on the parts being joined. For something like an arm for a wetsuit (which is a cylinder) you can make a support as a cylindrical form that fits INSIDE the arm so you can press the adhesive strip to good advantage rather than doing it on a flat surface and then bending the assembled arm which puts stress on the adhesive connection. Very strong adhesive- hasn't unstuck once! -If for some reason it doesn't (like there's an air bubble or a dirty greasy edge) you can still use the nasty Neoprene contact adhesive to make it all good.
shehab saeed
Reviewed in the United Arab Emirates on December 17, 2024
all good
Ricardo Martínez Leal
Reviewed in Mexico on May 14, 2023
Buen producto, pero excesivamente caro ...
Recommended Products
