Your cart is empty.
Your cart is empty.Features:This wireless trigger is control discreteness for camera to trigger hot shoe flashgun synchronously Easy installation， low power consumption No any damage to camera High-speed and synchronous for 1/200 second Max. working distance: 30M (open area， without interference) 16 channels to avoid interference The receiver has an on/off switch， and an LED to indicate triggering. New design: Channel Selector outside the transmitter and the receiverSpecifications:Wireless Flash Trigger;16 channels selectablePower Input of Transmitter: 23A 12V battery (included)Power Input of Receiver: 2 AAA batteries Long lifetime of trigger battery， one year or over 20，000 continuously triggersPlug size of receiver: 3.5mmAdapter size for receiver plug: 3.5mm --> 6.35mmPC sync cable includedRadio working frequency: 433MHz How to use:Make sure the channel selector of both transmitter and receiver at same positionInsert the receiver's trigger output plug into your flash's jackPress the test button on your transmitter. The studio light should now flashInsert the transmitter's hot shoe socket into your camera's hot shoe jack (if your camera does not have a hot shoe use a PC sync cord and insert into the socket)You should now be ready to start shooting (you can use the 3.5mm sync cable for cameras without hotshoe or hotshoe is engaged).
Kelley
Reviewed in the United States on January 26, 2025
Works great!
Customer
Reviewed in the United Kingdom on March 3, 2024
My previous set of triggers pretty much feel to pieces after six years of use, cost around £200 and were large and obtrusive. These are small, easy to use and cost less than a quarter of the previous triggers.
amanda
Reviewed in the United States on March 2, 2024
I just have to leave a review because I bought this back in 2019 for my einstine lighting system. I didnt want to pay hundreds for their set. Welp today YEARS later, I started having issues with the trigger and needless to say I need to get a new one BUT the fact that this 39 dollar invested lasted me soooo long, I am buying this right away to replace the old one. This is perfect on a budget and as a professional photographer of 11+ years, this is well worth its weigh in gold. Especially in this economy!
Customer
Reviewed in the United States on April 3, 2024
Great step by step instructions and it was up and running in minutes!
Karinka
Reviewed in Mexico on November 23, 2023
Hasta ahorita funciona excelente, buen precio duradero, tal como lo describio el vendedor
Customer
Reviewed in the United States on January 26, 2023
Only have had the flash trigger for one day, however, it worked liked a charm from the first flash. Trigger is attached to the hot shoe of a Canon EOS 7D camera that's paired with a Paul Buff White Lightning 10,000 flash unit. Camera is set in manual mode and I adjust camera settings from the reading off of my Gossen Luna Pro F flash meter. Could not be happier!
Marek Kowalski
Reviewed in Germany on April 24, 2023
Einfach zum bedienen und funktioniert ohne BroblemeDanke
Shawn Hanselman
Reviewed in the United States on August 31, 2021
This is a fine little remote system and works fine for a while. Mine stopped turning on, 6 months in. Tried multiple new batteries and cleaned the contacts with dry rag and nothing. Support did replace it which was nice.
Arjun
Reviewed in Singapore on February 27, 2021
For those who are wondering if it works with sony alpha, it does. Been shooting without a glitch in my a6000.
Lewis A Edge Jr
Reviewed in the United States on September 24, 2020
After my old wireless sync went kaput, I needed a replacement. This one worked great.Older studio flash systems, like my Novatron use a two-prong sync plug that closely resembles a standard 120 VAC electrical outlet. For at least one apparent reason, newer studio flash systems use either a 1/4" or 1/8" two-conductor audio plug, so they cannot be accidentally plugged into an AC power outlet.This Chinese-made NEEWER RT-16 Wireless Studio Flash Trigger comes with the 1/8" plug and a 1/4" adapter. Since I had long ago made a patch cable to adapt 1/4" plug to my flash's two-prong socket, I was able to plug this trigger into my adapter cable and have it work with my setup out of the box.The transmitter comes with a 23A 12-volt battery that can be enabled by pulling out the insulating tab. The receiver requires two AAA cells that are not included. The receiver has an on/off switch to preserve battery life. The transmitter is triggered either by a camera's hot shoe, a test button on top or an external sync cable that is not included. I used it successfully with my camera's hot shoe which was the most convenient.There are sixteen different dip-switch configurations on this NEEWER RT-16 Wireless Studio Flash Trigger that can be chosen to ensure that this wireless trigger doesn't interfere with others that may be nearby. Since my studio was no where near any other wireless studio flash triggers I used the default settings.For a reasonable price, I was able to restore wireless operation between my camera and my studio flash system with Amazon's two-day delivery.
PJ
Reviewed in the United States on May 19, 2020
I have a name brand set up and had issues with the transmitter. I replaced it with the newer version of said transmitter. After another year or so, I had issues with that. I looked at other systems but their price tags and commitment to their "system" were too much for me after my past experience. Someone in a photography group pointed me towards these. I ordered two sets (because we all know that photographers have to have backups for those times of technical difficulty). It was nice that they were at a price point that allowed me to purchase a back up right away and it also gave me another receiver to use as well. They're not fancy allowing me to adjust my lights from my camera, but for the price, I can deal with that. The ONLY downfall that I can see happening would be the battery dying during use because you don't turn them off and you have to dissemble them to change the (button cell?) battery, but again, that's where the spare can come in handy.Definitely worth trying these.
jennifer hamilton
Reviewed in Canada on November 10, 2020
Liked how easy it was to use and found it also worked with my Alien Bees!Perfect cost effective back up!
Kamieo
Reviewed in the United States on February 17, 2016
I needed a new trigger/receiver for my lights.These were with in my budget and shipped fast.It was packaged well. It is as shown in the photo.They are easy to use. Pretty much plug an play. Just put your trigger on top of the camera in hot shoe area and tighten.Then plug receiver into the sync area on the back of the strobe. Turn both on making sure they are both on the same channel.Then adjust your light and camera settings and they are ready to be used.They seem to trigger the strobe well. I am happy with them.Good for the value.
Recommended Products
