Your cart is empty.
Your cart is empty.Product Description
Mist Maker Float
Introduction
- This buoy is suitable for Mxmoonant 10 Head & 12 Head Ultrasonic Mist Maker.
- In an environment that is not conducive to controlling the depth of the water, it is used to control the mist maker head not to sink, and it has been floating under the water surface, in a suitable atomization position.
Important Note For the First Use
- Before using it for the first time, press the entire buoy below the water surface. At this time, the buoy will be filled with water, and the buoyancy is appropriate now.
- The buoyancy needs to be adjusted for the first use. You can appropriately reduce the thickness of the foam inside the Float or increase the weight so that the water level is 1cm higher than the top of the mist maker water level sensor and keep the mist maker level.
- How to reduce the foam? Please open the back cover of float carefully and reduce the foam. Because it is a plastic product, it is easy to break, so be careful when opening the back cover.
About Buoyancy
Product Upgrade
- Because of our Float upgrade, the size of the buoy is divided into 4/6/8 head mist maker suitable and 10/12 head mist maker suitable and marked on the product.
- If the product you received does not match your mist maker, please feel free to tell us and we will provide you with a satisfactory solution.
JoPa
Reviewed in Germany on January 21, 2025
Der passende Vernebler kann hierauf gut befestigt werden und schwimmt dann zuverlässig in der richtigen Höhe.Bei dem Preis der passenden Vernebler sollte der Schwimmer mMn aber immer dabei liegen, da ohne den Schwimmer quasi kein Vernebler gut funktioniert
Margitta T.
Reviewed in Germany on July 12, 2024
Wir haben Solekammer für Pferde gebaut, mit 2 dieser Geräte!Es funktioniert so wie wir uns es vorgestellt haben.
Joseph B
Reviewed in the United States on November 3, 2024
The float works, but it would be nice if they could make these smaller somehow as they are large. I put mine in a large Urn and the float is huge which creates issues with fitment in Urns
Customer
Reviewed in the United States on September 17, 2023
I had to spend time finding screws for the floats. Waste of time. Bad product.
Living in Hawaii
Reviewed in the United States on September 10, 2023
I have a 10 head unit that I use for Halloween. First year I used it, I rigged up a Rube Goldberg-esque system to keep the water level high enough to cover the mister but not so high that it choked it out. It had not occurred to me to float it. The next year I created a model of the float and 3D printed it. It worked, sorta. Never got the ballast correct and it flooded and sank a couple of times. This year I decided to just spend the money and buy it. Way better. Could sit a little lower in the water. It comes with small screws that go into the tabs on the ends of the mister then into the floats. I wasn't sure those tiny screws would hold for very long so I used long tie straps instead. See the photos. I can also cut them off for storage later. Can't really do that with the screws and not risk stripping out the holes eventually. Also the price. it shouldn't be this expensive. Injection molded plastic with foam inserts. I think it should be priced $20, tops. So minus a star for the tiny screws and the price. But other than that, I'm happy.
David Herzog
Reviewed in the United States on June 30, 2023
got the floats for a Halloween fogger cooler I built. Eliminated the need for a small water pump to keep the correct water level. mounted them to my 12 head mister, floated it in plenty of water and plugged in the mister. floated at the proper depth for 8 hours without a problem
Pwoody
Reviewed in the United Kingdom on June 11, 2023
It says this is fit for several models of mxmoonant misters but upon assembling with an approved model the whole unit is too buoyant which means the mister refuses to turn on unless you prod it down a little bit. Now I’m going to have to spend more time and money on something to weigh down the unit to a specific level to correct a production failure.UPDATE:Seller made contact and resolved the problem. Just make sure you contact before buying as there are two sizes and despite what the listing says it doesn’t work for the 6 head mister!
Martin Schmidt
Reviewed in Germany on January 18, 2023
Schwimmt am besten zwei Schrauben rein - direkt dafür auch vorgesehen und dann eins a
Majkboy
Reviewed in the United States on December 14, 2022
When spending a lot of money for styrofoam encased in a cute plastic shell, it would be nice to have instructions for use and care, along with mounting screws to fit the little holes that are pre-drilled.
Jordan
Reviewed in the United States on June 10, 2021
I'm not sure why there were so many bad reviews. I actually had previously been using a float I made out of pvc and some pool noodles. It began to get a bit fiddly, so I sprung the cash for this float. It is definitely overpriced, although works fine. If you buy this, it works best to submerge the float under water so that the water level is appropriate for your humidifier. If you need to adjust, you can remove some of the foam inside.Cheers
Don't stand for JUNK
Reviewed in Canada on October 27, 2021
It worked as intended for my 12 head mister, but it isn't such a high quality that the price is justified. Could use more options for mounting different sized misters.
Dank Hill
Reviewed in the United States on December 3, 2020
This thing is a massive pain to maintain, no room to work screws and the bottom has holes but doesn't come off, meaning there's no way to clean out the slime that builds up. Very dissatisfied, but it's the only floater in the market
Gabriel
Reviewed in the United States on October 8, 2020
When attached to a ultrasonic mister array this float allows it to function at maximum efficiency by keeping the array about 25mm below the water surface. This allows me to then float the array in a much deeper reservoir for longer uninterrupted run times. Although a bit pricey for a simple float, I do not believe I could have come up with a DIY solution that was any cheaper, so in terms of value for money I consider this a reasonable and simple option.
Recommended Products