Your cart is empty.
Your cart is empty.It provides a convenient place to flush your airbrush during cleaning or a color change, eliminating overspray and mess in your work area. Features a super-heavy, durable glass jar with integrated airbrush holder and carrying handle. Handle doubles as an anti-tip device, preventing the weight of an airbrush and hose from tipping over the pot. Easy-to-use; simply fill the glass jar 1/4 full with water or other suitable solvent and close the cover. Add solvent to your airbrush's color cup and spray through the rubber port in the cover, flushing the old medium from the brush and into the pot. The rubber port and a curved shield built into the cover prevent any backsplash. The cover also features a vent with a washable, replaceable filter which allows air to escape, but blocks overspray and fumes. Includes cleaning pot with handle, cover and airbrush holder, plus a spare filter.
MSguy
Reviewed in the United States on February 2, 2025
I mean it does the job. They are basically all the same but this one has a glass cup instead of plastic. Heavier than plastic one's that can slide all over the place.
lanzhu_oshi_2407
Reviewed in Singapore on September 18, 2024
holds Iwata airbrushes nicely, nozzle fits snugly in the hole. no need to spend $50 on iwata brand one lol
stikman
Reviewed in the United States on June 21, 2024
It does exactly what I purchased it for.It works great as a airbrush rest while you reposition the item being painted.Worth the coin.
Fred Cain
Reviewed in the United States on March 16, 2023
I bought this because the flimsy plastic stand that came with my airbrush broke. This works like a charm, not tippy at all. Plus I am enjoying having a sealed container to rinse out my brush between changes.
Customer
Reviewed in the United States on November 10, 2023
Product works just like it is described comes with a couple extra filters which was a nice surprise pot was nice and heavy which adds to stability only small problem was arm that hold the airbrush did not go in all the way into the lid of the pot but otherwise held onto the airbrush good enough to not feel like it was gonna either fall off or slip
Mr2253
Reviewed in the United States on June 20, 2022
Works great, serves its purpose well. The construction is decent and seems like it should hold up well. Very useful item, especially during the cleaning process, but it also is my main holder for my airbrush.
Hawk eye
Reviewed in the United States on April 9, 2022
I've gotten into airbrushing recently and realized I really needed one of these, so I chose this station.Overall, I'm very pleased with it. It's very easy to clean, it's of simple but sturdy and durable construction, and it's hefty enough that an airbrush won't tip it over, but it's not excessively heavy.My biggest gripe with the station I received is the bracing handle fit waaaaaay too loose in the station's pot lid. As soon as I'd pick up the pot, the bracing handle would fall out of the lid. Seems like a very minor issue, which it is. Except I've got a sore big toe that says otherwise because if this issue.The lid holes are so big I couldn't superglue the handle in place, so I had to haphazardly hot glue the handle in place. This actually worked out well, since the hot glue is holding the handle in place but I'm confident that I could yank the handle out of the lid with enough force if needed.In the end though, I don't think someone should have to worry about this. So while I am happy enough with this station that I would recommend it to others, I would caution against the bracing handle and advise to have some hot glue ready just in case.
Qx9r7man
Reviewed in the United States on August 15, 2021
If you own an airbrush, you really should get one of these. It cuts down on the fumes from cleaning them out (I used to use a plastic cup to dump my paint and thinner / cleaner; fumes go everywhere) it also gives you a place to park your airbrush if you don't keep your compressor on your table (I got one with a tank, and it sits on the floor). The bottom is glass, which is easy to clean, and keeps it from moving around too easy. The filter can be replaced with cotton balls or similar, trimmed to fit. For cleaning your airbrush, just put it in the holder, top it off with thinner, and spray. Follow with a bit of cleaner, or just straight thinner if you don't have specific cleaner, and spray it all through. The jar is large enough for many, many cleanings. Then just dump the contents of the jar and wipe out the inside, disposing of the contents and rag/towel appropriately for whatever chemicals you paint with.
person in ID
Reviewed in the United States on December 3, 2019
Good cleaning pot. Holds the airbrush without any problems, and was easy to clean after being used. It holds a gravity feed airbrush without issue, but for one that has a suction feed (paint is below brush in a bottle) the stand doesn't hold it (paint bottle gets in way). I had to remove the top portion of the stand to get that kind of brush into the cleaning pot, but it's not the fault of the item (I have both types of airbrush, so it will work fine holding gravity feed).The stand is stable, and it's easy to put together and take apart. All in all, nice cleaning pot. The bottom part of the pot IS glass, and didn't stain with paint after use. It also makes it heavier/more stable. There is a rubber gasket for the top lid, as well as where the airbrush goes in so the paint/water doesn't blow back at you (as well as a dam that diverts the paint/water down to the pot).I don't get paid for my reviews - honest review of item that I purchased.
Recommended Products
