Shopping Cart

Your cart is empty.

Your cart is empty.

MR CARTOOL V308 Injector Cleaner Machine 4-Cylinder, 110V Injector Cleaner Tester Machine Ultrasonic Fuel System Injection Cleaning Kit for Gasoline Diesel Car Motorcycle

Free shipping on orders over $29.99

$313.45

$ 99 .00 $99.00

In Stock

1.Size:Gdi V209


  • 【Ultrasonic Injector Cleaner and Tester】V308 can be used for cleaning and testing four injectors at the same time. Quickly remove carbon from your fuel system, testing leaking, uniformity, and inbreathes of injectors. Discharge fluid more quickly.
  • 【Multi-Functions】V308 injector cleaner machine has 11 Main Functions: Ultrasonic Cleaning; ldle Speed Test; Medium Speed Test; High Speed Test; Accelerating Test; Variable Speed Test; Leakage Test; ldle Spray Volume; Medium Spray Volume; High Spray Volume; Unit Info.
  • 【Ultrasonic Cleaning & Heated Cleaning Fluid】The V308 Injector Cleaning Tester has a 2000ml large capacity ultrasonic cleaning tank, which can clean multiple injectors at the same time, removing carbon deposits on the injectors thoroughly.The V308 has a heating function, which can heat the cleaning heat up to 40 degrees Celsius by pressing the switch on the side of the machine, removing carbon deposits on the injectors effectively.
  • 【Humanized Design】V308 fuel injector cleaner kit equipped with an LED display, pressure gauge, glass tubes, testing liquid level gauge, and multifunctional control panel, their combination allows you to easily operate through the clear menu, and monitor the fuel injector detection and fuel dynamic value in real-time.
  • 【Worry-Free After-Sales】MR CARTOOL offers a 24-month warranty and 7x24 hours of friendly customer service to ensure your shopping experience. No need to pay extra for warranty service, saving you a lot of money!



Product Description

V308

SIMULTANEOUSLY TESTS 4 FUEL INJECTORS


MR CARTOOL V308 simulates a wide range of engine operating conditions to clean and test injectors in a wide range of cars and motorbikes.

Allowing for intuitive comparison of the atomization, blockage, and fuel injection volume of each injector.

The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.

V308

Merchant Video

MRCARTOOL FUEL INJECTOR CLEANER – WHY IT'S WORTH BUYING ?

Power Supply AC 110V
Range of Rotation 0 - 7500r/min
PWM Pulse Width 0 - 20ms (step 0.1ms)
Working Time Setting 0 - 10min
Cleaning Frequency 28kHz
Injection Times 0 - 9900 times
System Pressure 0 - 0.6Mpa
Ultrasonic Cleaning Power 70W
Package Dimensions 340*295*360mm

Customer
Reviewed in the United States on February 7, 2025
Ultrasonic cleaning works awsome but the injector testing does not work does not spray and wonts you shut it off it leaks
D. Bryan
Reviewed in the United States on March 22, 2024
This fuel injector cleaner/tester works well right out of the box. Ultrasonic cleaner is fairly large at around 1200 ml and has decent depth for cleaning a variety of parts. It is not heated, though. I used the A-Team Ultrasonic Carburetor Cleaner from Amazon as a cleaning solution and used Isopropyl alcohol at 92% for the test fluid. Cleaned and tested 8 injectors first day taking 4 at a time through each test. Several injectors were bad to start so I ran through several ultrasonic cleaning cycles, removed the screens, and reverse flushed before testing. What's really nice is the number of fittings supplied with this set. In this case, the fittings for reverse flush were a different than size than for testing. While this accommodates injectors of various voltages, it also allows you to adjust the pressure to your operational needs. The results were an awesome aerated spray pattern on each with similar flows across all injectors (within 2ml). One thing to note is never use anything corrosive as a test fluid as it will destroy the pump and seals very quickly. The manufacturer recommended the alcohol which worked well for me especially since test fluid is difficult to actually procure. If you can find it, it tends to be very expensive. If using on injectors for every day drivers, alcohol as a test fluid is fine.
jovany ruiz
Reviewed in the United States on December 9, 2024
The media could not be loaded.
Flavio Moncayo
Reviewed in the United States on November 9, 2024
muy bien
Reinaldo C.
Reviewed in the United States on November 16, 2024
Funciona bien, la recomiendo para talleres pequeños, hay que tener cuidado con la manipulación del equipo las piezas no aguantan el abuso.
Alan Dominguez
Reviewed in the United States on October 22, 2024
Can use a little upgrade by making the drain plugs stiffer
David J.
Reviewed in the United States on July 2, 2023
I put it through all of its functions. We pulled 2 fuel rails from a yard for our stock car. The V309 cleaned, tested each one. The volume cylinders are clear and well lit. The fittings were tight and we had NO leaks. Definitely worth every penny.
travis
Reviewed in the United States on December 25, 2023
I Bought this unit to clean our injectors for our race cars. I have used it a few times and it works great for the price. It has several cleaning options and a ultrasonic cleaner on top. So far so good.
Recommended Products