Your cart is empty.
Your cart is empty.Product Description
234000(MP21YA)
RANGE SURFACE ELEMENT
SPECIFICATIONS:
- 8"
- 54 Turns
- 208V/1575W ; 240V/2100W
Stove Burner have been upgraded !
*Tube ends sealing process:
Ours: we use the Teflon to seal, it can completely seal the tube ends well to avoid the moisture get in, this not only improves safety, but also avoids leakage caused by dampness when not used for a long time.
Others in market: sealing material used by silicion cap, it can prevent the short circuit when the cold pin is bent and touched with the tube, but the disadvantage is no moisture-proof effect, normally called it fake sealing processs
*Brand
Choosing a good brand, is to enjoy better protection of consumer rights and interests, brand merchants will do a better job of after-sales, So we reject unbranded goods
*UL/ETL:
For such this electrical products, it must pass the basic certifications, American Markets required this product must be UL/ETL approved .For your safety, be sure to choose the burner with UL/ETL. .Our burners are all UL/ETL certified, Can be assured to purchase.
234000(MP21YA) DIMENSIONS : PLEASE MAKE SURE TO CHECK THE DIMENSIONS BEFORE BUYING! (UNIT: MM)
- REPLACE PART NUMBER: MP21YA 8’’surface element replaces electric range burner element unit set MP22YA&MP31YA,matches MP15YA and fits most brand ranges including Whirlpool,Hardwick,Hoover,Magic chef,Kitchenaid,Jenn air,Norge.Replaces WPY04100166,4381750,Y0E00801799, 400178,19950009,1938-344,1938-249,15928,0E00801799,04100166,SU306, MP26YA,MP26M,MP21U,MP21MA,7406P050-60, 74005447,715928,707457,7-7457,7-15928,550072,Y04100166,AP6024131,PS11757481,EAP11757481,1242502,PD00003012
- Matches 8" MP21YA Electric Stove Burner Element .
- Compatible Brands：Whirlpool KitchenAid Maytag Norge etc .
EASY TO INSTALL WITHOUT TOOLS
INSTALLATION TIPS
For a few cooktops or stoves, the coil surface element may not be stable sitting on the drip-pan. In this case, you should make the prong heads are parallel and push a bit down 2~5mm to stabilize the top surface element.
- Make both prong heads are parallel
- Bend down both prong heads for 2~5mm
234000 (MP21YA) 8'' SURFACE BURNER ELEMENT
Simple Installation , No Tools Required
Our product is an easy-to-install plug-in element that can directly replace for most stoves in USA. The installation steps are as followed :
- Turn off all range elements power. Make sure all stove dials remain in the OFF position during the installation.
- Wear work gloves,remove the existing range elements from the stove manually.
- Plug each surface element into its size appropriate location on the stovetop.
- Protect your hands. After the power is turned on,do not touch the element during the test.
- Universal 8" surface range element
- Y type bracket
- Rigorous processing technology
- Stainless steel 321 premium material
- UL certification with higher safety
STAINLESS STEEL 321 PIPE MATERIAL
2334000(MP21YA) electric range burner element is made of stainless steel 321. Compared with stainless steel 304, stainless steel 321 is added the composition of titanium, which has higher temperature resistance, stronger oxidation resistance, better wear resistance and lower deformation during electric stove burners working. Moreover, the service life of stainless steel 321 pipe will be longer than that of the stainless steel 304 pipe.
ADVANCED NEW SEALING PROCESS
OLD SEALING PROCESS
The range elements of old seal process can not ensure higher safety and quality.The old seal process is a technology 10 years ago,in fact,the end of heating element is not sealed. If the range elements are not used for a long time,it’s easy to cause leakage and shorten the service life. Therefore, many manufacturers will not use the old seal process to produce heating elements,but adopt a new seal process to ensure that the products have better quality and higher safety.
- Low security
- Easy to cause leakage
- Shorten the service life
ADVANCED NEW SEALING PROCESS
Sealed with Teflon caps and shrinking at the two ends of tubular heating element
Our range element adopts new seal process which is sealed with Teflon caps and shrinking at the two ends.Compared with the old seal process, which is sealed with silicone caps and without shrinking, the new seal process ensures surface element a longer service life,improves safety and avoids the leakage caused by damp though it’s not used for a long time.
- High security
- Avoiding the leakage caused by damp if the surface burner element doesn't work for a long time
- Improve the service life
UL APPROVED
Most of our heating elements have passed UL certification, fully complying with the electrical safety standards of the U.S. market. As a professional manufacturer with more than 30 years of experience in the electric heating element industry, we TOP-HEATER have manufactured a large number of products to North America according to the requirements of different customers, and are highly recognized by customers for providing high-quality products.
stacky
Reviewed in the United States on March 7, 2025
It worked great as a replacement for one of our burners that stopped working. Only complaint is that only 1/3 of the metal supports has little prongs sticking up to hold the coils in place; it makes a sound each time we step close to the stove in our kitchen.
betsy konkel
Reviewed in the United States on February 5, 2025
Order the correct size
sammy
Reviewed in the United States on February 28, 2025
It works but does not fit into the slot to stabilize it.
isaac white
Reviewed in the United States on January 4, 2025
I had bought two smaller eyes during the time I bought this one and they're gone they was a waste of income this one is still going good product
marcy mccarter
Reviewed in the United States on January 21, 2025
My oven works again!
M. Antoline
Reviewed in the United States on January 19, 2025
Excellent replacement coil for my Frigidaire range top. Fits well. Most importantly, the coil is flat across the surface, for good contact with cookware.
Michele Koji
Reviewed in the United States on September 2, 2024
Fits perfect. Works great!
Customer
Reviewed in the United States on December 24, 2024
The units were easy to install and heat quickly.
Recommended Products