Your cart is empty.
Your cart is empty.Product Description
Motorcycle LED HD Angel Wings Projection Lights
Riding a motorcycle after dark can be anything from a sub-par and dangerous experience to one that is an enjoyable and equally safe alternative to daytime riding. This LED HD underbody waterproof ghost shadow lights can upgrade your Motorcycle, when you ride a motorcycle, the projection lights like angel wings on the road, cool, eye-catching but not dazzling.
---ATTENTION PLEASE!
Installation location: Motorcycle bottom sides.
Noted: 1. Please confirm whether there is a place to install before purchasing the light kit.
2. The location of the fixed host at the bottom of the different models are different, only for reference.
3. Adjust the illumination angle by adjusting the bracket up and down
- Installation line Connect fog lights, tail lights, headlights, etc.
HD Motorcycle Projector Light Kit – Universal (Right side & Left side)
Angel wings ghost shadow lights for Motorcycle
Specification:
- Application: Motorcycles, bikes
- Operating Voltage: 8-36V
- Power Output: 3W
- Light source: LED
- Line length: 78.8 in / 6.56 ft
- Housing: Aluminum
- Operation Temp: -20℃ to +70℃
- Life Span: 10,000hrs
- Size: 1.84 in * 0.81 in
- Rating: IPX4
- Package: Pack of 2 (right and left)
Features
High-quality housing
High-quality lamp beads
Hight definition lens quartz glass
Constant current voltage regulator with no pole protection
Motorcycle Angel wings ghost shadow lights
White, Blue, Red and Ice blue in Available
Cher
Reviewed in the United States on May 27, 2024
Im sure it’s a good product but it didn’t work for my husbands bike.
David
Reviewed in the United States on January 7, 2024
When I first got the lights, I tested them with a small 12V power supply I had lying around and everything seemed normal. I tested them individually so I didn't notice that the LEFT light was significantly dimmer than the other light. Fast forward two months, I'm overseas, and I am finally able to give this light set to a relative of mine as a present for his new motorcycle. Turns out that the left light lens was totally opaque. It never occurred to me to twist open each light to inspect the lenses until they were already installed and wired. It looks like a manufacturing defect to me because it doesn't feel like a protective plastic. It feels like rough-sanded glass.The big problem is that I can't return it and ask for a refund before the time window expires. I tried to contact the seller directly, but Amazon's support system won't let me. I'm stuck here. I wish the seller would reach out to figure out what to do. I just want a left lens replacement. I have to admit, the bike looks really cool from the side of the working light.
Shannon H
Reviewed in the United States on January 17, 2024
Really neat lights. Look really cool on our motorcycle.
Jason W.
Reviewed in the United States on June 17, 2023
I have a custom painted Goldwing that makes these lights really match the style and theme of the “Goldwing” brand. After I picked my front air deflector accessory as my spot, it created the perfect wing effect. I do wish I could mounted them in the rear for a better mounting point, ultimately the look I was going for needed more of an angle on the lights.
Gingysnaps
Reviewed in the United States on September 26, 2022
Pretty easy install. Bought a waterproof on/off switch. Wired it up, took an hour.Had a friend stand behind bike at night, to balance them out, so they look the same on each side.Everyone that sees them, likes them. You’ll Lovem.
Andres Montoya
Reviewed in the United States on October 13, 2022
Brackets don't hold their position, cheap material, the wings projection ends up backwards no matter what method you use to hold the light rotation. Do not waste your money, neither waste your time installing it and buying switches to control them. Really sad because it had a lot of potential.
Back yard mechanic
Reviewed in the United States on March 10, 2021
Am well pleased with the look it gave to the bike. Haven't seen any of these out there. Wired in a kill switch and fuseable link to ensure no real surprises like a dead battery. Have yet to night ride with them but am sure it will be noticed. Wires are fine not sure the gauge and there is no switch you'll need to get your own. I mounted them on the crash bars about 6 inches above floor boards and waited until it was dark enough to get position that made for the right spread for me. Lens can be turned to get projection right and need a a small phillips to adjust angle. If you take your time they are pretty nice and of course add to your visibility. Brackets were also thin enough to bend around crash bar and instead of screws the mounting tape and some zip ties will do the job. Extra connectors, wire strippers and some zip ties will be a big help to do this job. I recommend doing time shrink tube or anything to keep it water tight on your joints and be mindful of hot surfaces and rub spots extra tape can help. Ride safe and check local laws before adding. Check your laws though am wishing they were offered in yellow or green. Will have to modify to change color so law enforcement isn't huffing an issue. Some yellow cellophane may be my answer. Shame you can't just unscrew and change the bulb.
Xavier Gutierrez
Reviewed in the United States on November 6, 2020
UPDATE. 2: customer service reached out to me to get my input and what was wrong with my lights, they forwarded it to their techs and they sent me new replacement all withing a day and got them 3 days later shipping payed for (happened Friday got them on Monday), have not installed the replacement yet but for amazing customer service I'll be updating to 3 stars until I get around to installing the replacement I'll update once again after riding around at least a month before I make any update.UPDATE: everything works as it should BUT the biggest issue not matter how many times i try to glue to stay still or extra modifications to basically bolt as one solid piece to the bike the damn lights simply do not stay as modified and keeps spinning around as I am riding making it so damn annoying to deal with and i just simply have to turn it off completely. I believe you just have to open it up and just glue EVERY last piece in the lights to keep them all welded stuck from any movements. Extremely annoyed and disappointed with this and i'm already pass any return or exchange date so i'm stuck with it having to continue to dissect this until it is how i want it to stay. changed to 1 star absolutely horrendous especially with the battery drain I had to push start my bike multiple times and tested to ensure it was this and not anything else this is the only extra direct to batter mod i have and I disconnected it completely to test and bike was starting better without it.Original Review: These worked exactly as described and with extra cable length, they are bright in dark but if you're at a spot with lights they are dim but still visible. I will add that these do kind of drain the battery not too much but enough that if you have these on without the engine running to charge battery you will be stuck being unable to start up your bike depending on your battery type had to charge up bike overnight as I could not test ride with these due to leaving lights on long. Also I suggest strongly you get a switch to be able to turn on/off the lights as they are not at all visible in daylight and it helps in reducing battery usage find a switch you can place somewhere accessible and easy to use. Lastly I also want to say if you have a naked bike be sure where you are putting it as there is very limited cabling options on where to pass it through or tie to.
Recommended Products