Your cart is empty.
Your cart is empty.Moog Problem Solver products incorporate proven design and engineering features for like new steering, ease of installation and longer life. Moog is the preferred steering and suspension brand of professional technicians and NASCAR Crew Chiefs.
AJ
Reviewed in the United States on October 9, 2024
Hole sizes were way too small for the drivers side.Save yourself the hassle of trying to trim the rubber or heat it up, just return it or don’t buy this one. (The passenger side fit perfectly without issue)
bostin
Reviewed in the United States on July 13, 2023
Fit well on my del sol
ShaTia Hart
Reviewed in the United States on June 8, 2023
The quality was great but it doesn’t work for both left and right sides on a 99 civic ex. The bellow is too small for the left side.
Shadow
Reviewed in the United States on March 22, 2023
Overall, this is a Bellow. However, it is a little misleading, showing a metal tie in the pictures and then upon receiving this only having a regular zip tie for the smaller end side. Overall, it is not a big deal. You can use zip ties and will function the same, just showing an image of the product with the metal tie is misleading before making a purchase .
steve
Reviewed in the United States on November 5, 2023
Works good. Comes with plastic zip tie though, not the ear clamp in the picture.
Jess F
Reviewed in the United States on March 20, 2022
Bought this for my 98 Honda CR-V. It was for the passenger side ventilated bellow. Had to pry on with needle nose but went on good!
Vincent
Reviewed in Canada on September 13, 2020
Parfait
Carlos
Reviewed in the United States on March 28, 2020
Cant go wrong with the moog brand . They shipped fast and the product was legit , thank you.
cperfection
Reviewed in the United States on March 7, 2017
Rebuilt 2000 civic si front end and one of the parts replaced was the R&P bellows. Regardless who makes these bellows, time, environment and wear & tear will destroy these bellows. I found the Moog parts was of good quality and highly recommend replacing older bellows with Moog.Read some of the reviews concerning install and no issue when done correctly. First you must remove the outer die rod, remove old bellow, clean area and apply silicone paste to both ends of the new bellow. Push the larger end over the R&P housing and reassembly front end. Given the work involved, you might take the time to inspect and replace the inner/outer tie rods, ball joints and other parts given age, use, condition of parts.This will take some time, but not a difficult job provided you have some knowledge and mechanical ability around cars/tools.As stated rebuilt the entire front end using Moog parts, end result Si is driving tight and like new. Keep in mind when ever you replace a major part in the front end or back end it is advised you have the car 4 wheel alignment done as the final step in the process.
Recommended Products
$64.97
$ 28 .99 $28.99