Your cart is empty.
Your cart is empty.Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Wayne Feragen
Reviewed in the United States on February 17, 2025
Ball joints installed on a 2000 Honda crv and had no issues. Car has been driving great and I haven’t had an issues. No noises and all components changed made the car feel better on steering.
Steve Donahue
Reviewed in the United States on January 9, 2025
Moog parts are the parts I use for all my projects when I can find them . Would recommend them to anyone who wants a great part that doesn't need replaced every couple of years unlike house brands from the part stores!
como651
Reviewed in the United States on January 3, 2025
I would only trust putting Moog or maybe a few other reputable brands in for suspension parts. I could have saved $12 by putting in cheap Chinese parts off Amazon or get this Moog ball joint. Why go through all that work twice to save $12. I’ve used cheap parts before and the rubber boots fail after two years. The boot on this feels thick and tough. I expect it to last 5-6 years at least. Moog has been around for a long time and are known for precision quality on the things they make.
Ruthless.spec
Reviewed in the United States on January 12, 2025
The bushing popped and all the grease came out when I put everything back together on the car.
Mr vang
Reviewed in the United States on October 29, 2024
Nice quality and not so expensive.
Customer
Reviewed in the United States on January 10, 2023
I received legit ball joints install went smooth rides great I’ll update on any issues. I did notice a little grease seeping through but no issues after 5k miles on lowered crv
Supraman
Reviewed in Canada on September 28, 2022
Got these cheaper on Amazon than Rockauto. I've been using MOOG products for 25 years and they've NEVER failed me!
Kamasa
Reviewed in Canada on December 13, 2018
Solid piece and is used on my car for circuit racing.
Customer
Reviewed in Canada on April 26, 2018
Fast shipping good price
ken i
Reviewed in the United States on June 26, 2017
2 out of 3 times, the upper circlip (the one near the retaining ring after installation or close to the steering knuckle), punctured the rubber boot. Once, while taking off/repositioning the retaining ring, and the 2nd, while installing with the C-Clamp ball joint press kit (likely warped). I've used Shoe-goo as a temporary fix (super glue may work). The point is, the cir-clip this ball joint comes with is of a different design from the oem, strong and thicker (not like key ring), and doesn't really stay where it's supposed.Now I've resorted to buying cheaper ball joint of a similar design in boot, to place on these. If these ball joint studs are still stiff after 1 year, I may upgrade the score to 4 stars. If you have mechanic install these for you, then make sure you ask to inspect the boot after installation.Steering wheel no longer shakes at highway speed after installing this. The one I removed (same model/torn boot) to re-install with a new unit, after a week/300 miles of driving, was stiff, which is good.Update: Within a thousand miles or so, the castle nut ate through the cotter pin supplied with this ball joint as it's too thin. Be sure to get a cotter that is 3/32" thick and between 1-1/4" to 1-3/8" long. 7/64" thick cotter pin may fit, 1/8" will not.Update: I've had these ball joints for almost a year, and I'm quite impressed. On one side, I accidentally ran over a dead deer at 80mph, 5 months after installation. On the other side, I came across 5" deep pothole that slightly distorted my alloy wheel rim, 7 months after installation.Both ball joints are still "stiff", when I move them from left to right, indicating they are safe to use for the time being..2 year update: The rubber boots are hold up well indeed, and are not torn.
David Anderson
Reviewed in the United States on July 29, 2013
5 stars- Moog is quality Brand though the rubber boot comes as color black which is perfectly fine it functions well. Comes pre greased ready to install. Special tools required but easy to acquire for the DIY Home Mechanic..You must be a little bit mechanically inclined in order to remove and install them correctly but I promise you it's not rocket science. The removal and install went well with the free loaner tools I borrowed from my local parts store.To remove and Install I took advantage of Autozone com Free Loaner-Rental Tools Program using tools #27023 & #27164 for Honda/Acura. Search the net for balljoint replacement using the tools mentioned and you'll find a few writes ups with pictures if you get stuck. Please note that you must pay a deposit for these tools at the store mentioned above but using the free loaner rental tools program I was able to complete the job in under a few hours by myself and you can return the tools within 90 days and they return the deposit. I guess you basically buy the tools but they offer a refund when you return them within 90 days because these tools are included in their free loaner tool program. I used a car jack and stand, ball joint seperator from Harbor Freight #99849, rubber mallet, some moly grease, 14mm, 17mm, 10mm, 1 1/4", flat head screw driver, needle nose pliers, and the huge c clamp and adapters mentioned above in the parts kits #27023 & #27164 from autozone, and lastly, snap ring pliers for the new circlip on each new ball joint.All in all I would not hesitate to purchase these items again for another vehicle if needed. I only thought I needed one part because the drivers side had a huge tear in the old boot but I decided to order two of these parts because of the great price! After changing the first one I decided to change the second one located on the passenger side considering how easy the first was to remove and install. I realized the old ball joint on the passenger side was actually worse in movement when compared to the drivers side which just had the torn boot. I would suggest that you just buy two of these parts for your car and go ahead and simply change both the left and the right sides while you are at it that way you know your ball joints will be good-to-go for a long time and if you use the tools I mentioned above for a honda or acura or if you don't have honda or acura you won't need the #27164 kit. Either way your removal and install using these simple tools should go very smoothly. Good Luck with your purchase decision!
Recommended Products
$104.99
$ 46 .99 $46.99