Your cart is empty.
Your cart is empty.4.1 out of 5 stars
- #78,657 in Electronics (See Top 100 in Electronics)
- #178 in Speaker Stands
- #40,680 in Furniture
Many small satellite speakers have ports on the back, which are designed to improve the bass response. For best sound response, it is usually recommended to mount these speakers about 1-2 feet away from the wall, to allow the ports to work properly.
This speaker floor stand set is designed to let you mount your satellite speakers in an ideal location, away from a wall. The stands are height adjustable from about 26.8" to 43.3", allowing you to mount the speakers at your ear height when sitting. They can hold speakers weighing up to 5 lbs each.
The brackets mount onto speakers with a standard 1/4" x 20 mounting screw or via a keyhole mount. The stand tubes are hollow so that the speaker wires can be hidden within.
Wing Leung
Reviewed in the United States on December 27, 2024
I have a set of Polk Audio RM1300 surround sound speakers. The stands came with three sizes of machine screws but none of them fits the threaded holes on my speakers. I tried attaching the speaker using keyhole method (see attached photos). The speakers allow the keyhole method. The speaker sagged and may fall if someone bump onto it. And the "Universal Bracket Cover" (see photo - part k) protrude from the back. Another issue is with the small screw (part i) that locks "Universal Bracket" (part h) to the "Tube with twist-lock" (part B). It broke while I was attaching it. This is the wrong screw or something. I had to use so much force on it to get it to go in that it broke. Right now the "Universal Bracket" is just sitting on the tube with the broke screw. Since the screw broke, the bracket is NOT locked tight onto the tube.This whole set up is kind of dangerous. If I live by myself, this would be acceptable. But I am not. If someone touches it this would be bad news. If no one touches the stand, it work as well as it should. The stands hold the weight of my speakers well. And the height adjustment mechanism works well.
Stephen Nichols
Reviewed in the United States on November 17, 2024
These stands are a fantastic value sturdy and well made. A metal base and tubing with a solid metal disc as a weighted counter balance that’s underneath the curved metal base plate . They are adjustable in hight as well. Highly recommend….
Alex
Reviewed in the United States on July 1, 2023
I needed a way to put rear speakers near my couch. I'm a woodworker and when I get around to it I'll make something so I didn't want to spend a lot on something that I would be replacing. These are a perfect fit. There's a heavy weight in the base so they are quite stable. However the plastic that the speaker mounts to did break when one of my cats ran full speed into the speaker when he jumped off the arm of the couch. So I had to make a new way to mount the speakers. So I did mark down the durability some.They have plenty of height adjustment and the speaker wires run inside the metal tube. So they have a clean look. If you have rough kids or wild animals they may not be durable enough. That being said after one got knocker once it hasn't happed again. I did have plans on mounting the base to a wide heavy piece of hardwood to help keep them upright but I haven't and doubt I will
Christian lund
Reviewed in Sweden on April 14, 2023
Great for my home surround sound system and easy to assemble
ian Flier
Reviewed in the United States on July 24, 2022
Great minimalist surround speaker stand.Gets the job done and comes with all sorts of bolts and washers so you can mount a wide variety of speaker brands.I'd say it's probably worth no more than $20 or $25 because of the build quality. It's borderline cheap looking but it's acceptable by my standards because you won't be staring at it. as you watch your movies. the little plastic that tightens the two halves arrived and functioned properly but I can see this could be a problem. Try to delicately put tighten and assemble this unit or you might damage it's plastic parts.When you shop and look for alternatives online, you'll see that nothing can touch the cost benefit of this set.It was very easy to assemble and put it together for my set of 5.1 ONN (Walmart branded...) speakers with the two surround satellite speaker set. By the way, these satellite speakers are quite big and heavy and this stand had no issues coping with the added weight. In a sense, I'm impressed.If you're like me and always try to stretch your bucks as far as you can whilst purchasing a product that will not crumble right before your eyes or as you attempt to put it together, this is the set for you.I highly recommend this product.
Joss
Reviewed in France on November 1, 2021
Très bon produit facile à monter stableLivraison rapide et en plus le produit était super bien emballé bravo au vendeurTrès sérieux je recommande
Zmedic
Reviewed in the United Arab Emirates on January 14, 2021
Well designed, instructions are missing but it’s intuitiveHolds up My Sony speakers wellOverall good product highly recommended
XAVIER
Reviewed in Spain on July 30, 2018
Prácticos y discretos. Cuando se instalan el cable de los altavoces pasa por el interior del soporte, por lo que quedan muy bien.
Cesar
Reviewed in Spain on November 7, 2018
Producto de muy baja calidad. En solo un mes, los soportes que unen el altavoz con el pie se han partido.No busque lo más barato si no, calidad Vs precio y mejores opiniones.En mi caso a sido muy negativo.
LegoDude
Reviewed in the United States on May 1, 2013
I needed something to give me better options in a weird shaped room for my rear channel speakers. I didn't want to spend a ton of money for something that just holds a speaker, so went with this.It shipped quickly and is adequately packaged, so not much chance of damage during shipping, but my immediate complaint was styrofoam. I hate styrofoam since it always ends up with a bunch of small pieces broken off that just seem to get everywhere far too easily.Assembly was easy, and even getting the speaker wire through the stand was not too difficult. There were no screws that fit my speakers (Yamaha) so I had to use the generic key option to fit in the slot on the back of them, and this was another part I wasn't too thrilled with. The default way to do it is a screw ran backwards so that the head of the screw is what slides into the slot of the speaker. Then there's supposed to be a rubber washer, the stand then another rubber washer and a little female part that screws onto it with thumb grips that you use to tighten it all. I tried it that way but the rubber washers meant no tight fit, speaker sagged and wouldn't sit upright. So I pulled the rubber washers and just used the screw and the thumb tightening piece, and that worked better, so the speaker sits mostly upright now, but the problem using a screw is there's no good way to really get it as tight as I'd want since the screw in the slot will just spin after a certain point. I could pull the speaker off and try to tighten it a little more, then try to force the speaker back over it and just pressure the speaker into place with a tighter screw there, but I didn't want to risk braking any of the plastic, either on the speaker or on the stands. I managed to get it about as tight as I could without risk, and the speakers are held just about upright now.The bases have a weight under them to help keep everything stable, and the stand adjusts easily up or down.All told, you are getting what you pay for with a lower price, but for someone with my needs, it at least is functional and inexpensive.
Recommended Products
