Your cart is empty.
Your cart is empty.Product Description
Product Details:
» Product Name: Adjustable universal CV boot clamps.
» Handles Temps: Over 2500° F.
» Tensile Strength: 100 lb.
» Color: Silver tone.
» Feature: Single ear model.
» Package Content: φ1"-1.7"x4pcs, φ3"-5"x4pcs.
» Weight: 0.08kg.
Instructions:
- MIKKUPPA CV boot clamps after special treatment, under normal circumstances will not rust.
- Kind feedback of satisfied customers confirms that our CV joint clamp are ideal when leak free tightness is required.
- Use the universal boot clamp kit to clamp CV boots in place when replacing CV grease, cleaning the CV joint or when replacing missing clamps.
Customer
Reviewed in the United States on March 11, 2024
Product was weak broke apart had to use 2 bigger ones need to replace them thanks
Dan S.
Reviewed in the United States on November 9, 2023
These clamps are made of SS and are easy to install as long as you have the special tool. I need a clamp for the front axle boot on my 2013 Lexus GS350 and these worked perfectly.
NZ
Reviewed in the United States on December 29, 2022
These things work great and for the money vs. the way more expensive name brand tool, can't beat it. The poor reviews coming from people saying the winding spool falls out of it and that the band leads aren't long enough are coming from people who don't know what they are talking about. Yes, the band leads to tend to be a bit short and slip out of the spool at first, but put the band in the tool, bend the lead up so you can get as much into the tool as possible and then grab the end of the lead with a pair of dykes or needle nose plyers as you rotate the spool around a bit to get it to grab. When your done winding, the spool is SUPPOSED to be able to be pulled out so you don't have to unwind the entire lead you just wrapped around it. Pull out out the spool and then pull out the cut off lead. If was using one of these every day for my job I would get the real ones but for casual use, these puppies are great.
Tommy B.
Reviewed in the United States on July 25, 2021
The clamps work, but they are not the easiest to put on. If you can go with the correct size clamp I would recommend trying that first.
Amir M.
Reviewed in the United States on March 16, 2021
Week and bendable, does not hold the cv boot properly and grease will leak out as a result. Possibly gets lose during as a result of the velocity. Installation is a pain, it bends easily on one side while the other side is not bent at all. Needs adjustment before installation since it’s wider that the tip of the tool. Overall very disappointing since the labor is too much and you end up with replacing it soon after with other clamps.
Eddie
Reviewed in Canada on July 2, 2020
Awsome clamps easy to use with the rite tools
佐藤忠光
Reviewed in Japan on June 6, 2020
プライヤー頭を切断しサンダーでヤットコに工作し締め付けに使用。締まりました、スコブルF/Bに締め付け完了。
Geoffrey
Reviewed in the United Kingdom on March 12, 2020
Bands look sturdy and have claws on the leading edge that fit into square holes on the circumference to make the clamp a tight fit. I fitted on a cv boot when the driveshaft was held in a vice which is much easier that fitting on a boot in situ on a car. My headline is "a video is needed" because my first clamp fell off! I used circlips to pull the clamp as tight as possible before I used the clamp pliers to tighten the clamp. Because I lost the clamp I assume the clamp pliers pulled the clamp too much and pulled back the "claws" that fit into the square holes - hence why the clamp fell off. I fitted a new clamp and hope I have not overtightened and this replacement remains in situ. For those that are interested! the clamp falling off meant I lost all the grease in the cv boot but I replaced the clamp before I had permanently damaged the new cv joint. You will also know if the boot isn't secure because there will be cv grease sprayed over the car wheel.
bob
Reviewed in Canada on February 10, 2020
Perfect for tarps
hi-san
Reviewed in Japan on April 2, 2020
注意点はドライブシャフトに付いているABSセンサーリングに接触の恐れあり（カシメを潰しましょう）
Mark M.
Reviewed in the United States on December 18, 2019
I replaced my CV boots on my truck, using the bands that came with the new boots. After one month of driving long distance, the cheep retainer bands snapped or came loose. I found these clamps and figured I'd give them a try. They hold the boots on ten times tighter and feel solid. These new clamps work great!
Gilbert D
Reviewed in the United States on November 26, 2019
I like these oem style clamps because it is easier to fit them securely onto the cv boot. The types that are commonly found in auto parts stores are hard top tighten properly. You have the have boot crimp pliers to put these on but these are so much easier and secure.
ernie
Reviewed in the United States on January 12, 2019
these bands work well, purchased these for cv boot replacement on a utv, these are easy to usetighten up well and seem a better quality than the ones they send in a boot kit
Recommended Products