Shopping Cart

Your cart is empty.

Your cart is empty.

MIKKUPPA 24pcs M12x1.5 Lug Nuts - Replacement for 1984-2013 Toyota 4Runner, 1995-2013 Tacoma, 2000-2006 Tundra Aftermarket Wheel - Black Closed End Lug Nuts with Socket

Free shipping on orders over $29.99

$22.99

$ 10 .99 $10.99

In Stock

About this item

  • Vehicle Models: Aftermarket wheels with 60 degree seat, replacement for Toyota Tacoma (6-Lug Only), 4Runner, FJ Cruiser, Sequoia, Tundra, Chevy Canyon, Envoy, Colorado, Not fit for 90 degree seat original wheel
  • Specifications: M12x1.5 thread - closed end bulge style lug nuts - conical 60 degree seat - 0.67" 17mm hex - 1.38" 35mm long - 0.78" 20mm OD(width) - color: black. Include 6 spline socket key
  • We are Different: After 72 hours of strict salt spray test, makes the nut resistant to oxygen and corrosion, gives the nut a bright visual impact. Using infrared drying technology, the paint is integrated with the metal and will not fall off easily
  • One-Piece Nuts: The one-piece structure design is more splendid and safer than the two-piece design. Thick coating, cold forged and heat treated steel soild lug nuts, anti-rusting and anti-stripped, high strength and durability
  • Brand Support: At MIKKUPPA, we are dedicated to delivering top-quality wheel lug nuts and exceptional customer service. Our commitment to enthusiastic support for 12 months ensures a worry-free shopping experience



Product Description

1
1

Important Notice

For stock wheel users, we suggest to use shape of existing lug nuts' Flange, Seat Type, and Height as refernce before buying.

Compatibility chart from Amazon is only designated for Thread Pitch check. The actual fitment varies based on the requirements of wheels. Lug nuts/bolts seat has to strictly follow the wheel condition. If you are not sure, please do not hesitate to ask us.

Use existing lug nuts shape as reference

How do I know If this product will fit my car?

  1. Use amazonconfirmedfit to check Make/Model/Year
  2. Check wheel studs are factory default
  3. Check wheel studs are less than 1.3” Long
  4. Check wheel lug mating surface is cone shape
  5. Check wheel lug hole flange requirement is 0.8”
QLN022
1

Bolt Length Limit

Maximum Hub Studs Allowance: 1.3" 33mm

3

Seat Way

Wheel Seating Surface Shape: Conical Seat 60 Degree

2

Thread Size

Wheel Hub Studs Thread: M12X1.5

(Bolts may age and cause thread mismatch)

1

Flange Limit

Mimimum Wheel Hole Flange: 0.78" 20MM

4
4

Customer
Reviewed in the United States on March 11, 2025
Fit my 2011 STI perfectly.The coating does seem better than the others on amazon.Time will tell.
Steven
Reviewed in the United States on February 17, 2025
These work great for our aftermarket wheels the color is great and the quality is great had these on for a while now and no rust yet
Paul Archie
Reviewed in Australia on January 14, 2025
works exactly as described by the seller
FastAndCurious
Reviewed in the United States on August 11, 2024
Solid materials. Fits good and looks good.
djord
Reviewed in the United States on December 14, 2024
Way too little metal in these. They come with a plastic wrapper that you are suppose to use when putting them on so you don’t scratch them! Secondly you are not supposed to use an impact wrench! They fully admit the paint is low quality and the metal will not stand up to an impact wrench. They don’t tell you that in the description. Too late to send them back.
Victor
Reviewed in Mexico on January 30, 2024
Cumple con lo que se necesita
Surfteam
Reviewed in the United States on January 14, 2024
Works well, good packaging and quality lugs.
mike
Reviewed in the United States on April 27, 2024
Old man here,,, and I will tell you why these are a must... have a 2007 Titan... you have to tap a socket on (tried several different ones) then break it loose... but the socket sticks.... so you have to tap it ... wiggle it to get it off the lug... then repeat another 5 times.... now jack it up ... break out the gun and tap the socket back on... take it off... find a punch to tap out the lug from the socket and repeat 5 times... ok that's one tire now 3 to go..... So I bought these and easy on , easy off.... saves your back and time. as to durability.... well I did all the wheels several times since I bought them.. and the lugs get a little scratched up but still look good and the tool.... is holding up very well.... I just bought a set for my Xterra and used the same tool that I got for the Titan with no problem at all. plus I have a spare if I ever need one.
Gearcruncher
Reviewed in Canada on June 21, 2023
For my 2010 toyota tacoma with aftermarket rims . Lets hope the rust stays away
Tony Book
Reviewed in the United States on March 16, 2023
They feel very good quality, the coat didn’t come off of the Lugs at all when I tightened them, as long as there was not rocks in the socket, and on most kits the Key feels flimsy, but this one feels super solid, the fit on each of the bolts with the key is SO snug and perfect, wasn’t even nervous tightening them to 85 ft lbs. amazing value, don’t spend $80 on a set of morimoto or NRG racing keyed lugs, just buy these, they are great.
1Plus1Equals3
Reviewed in the United States on October 14, 2023
I initially was concerned that these wouldn't work on my 2011 Nissan Armada stock alloy wheels but I was pleasantly surprised that it fit perfectly! I purchased my Armada used and the previous owner had several lug nuts missing (7 lug nuts). I decided to take a chance on buying this set of lug nuts instead of buying factory stock lug nuts to replace the missing ones which would have cost way more than this complete set. I'm so glad that I did!!! They look great and when I decide to upgrade to aftermarket wheels these will work with them as well. If you're in a similar situation as I was in, don't get ripped off by the dealership and buy this set!!! It's an easy WIN WIN situation. Have a blessed day!!!
Marc Forest
Reviewed in Canada on April 17, 2023
 
Wayne Brown
Reviewed in Canada on December 4, 2021
They fit perfectly arrived in time and is good quality
Recommended Products