Your cart is empty.
Your cart is empty.The 10-Gallon ASME Certified Reserve Air Tank UA3810AB is the perfect addition to the jobsite to ensure the air pressure being supplied to all nailers is sufficient, and that the required PSI remains constant - even if the compressor is 200 or more feet away. Simply add this reserve air tank between the compressor and nailers and there will be enough pressure to power five or more nailers operating at the same time. In the event that a nailer requires less PSI than other nailers attached, the UA3810AB has that situation covered with its standard factory installed large knob regulator.
Roberto Gonzalez
Reviewed in the United States on March 2, 2025
ok
Phil828
Reviewed in the United States on June 27, 2024
There are not a lot of portable air tanks on the market that are this versatile. It holds a useful amount of air if you need to take it somewhere to inflate a tire for example. You can read the specs for yourself but the design is well thought out. Importantly it has a drain valve on the bottom to empty the water when not being used. The only negative I can report is that it is a bit heavy.
Catfish
Reviewed in the United States on December 31, 2024
Product is very durable
Dung V.
Reviewed in the United States on July 26, 2023
I already owned a Makita MAC5200, my compressor only hold 5 gallon of air at 140 psi max, When I use my air tools, it constantly running out of air and the compressor constantly running. So I do need to figure it out how to add more air for my air tools.Makita MAC5200 is a great compressor on wheel, I did not want to replace it with larger compressor, so I decided to purchase this "Metabo HPT Reserve Air Tank" based on many great reviews.I'm happy with my purchase, the "Metabo HPT Reserve Air Tank" come with 4 push quick connect and they work well and it's portable, easy to put it away when not use.I highly recommend this "Metabo HPT Reserve Air Tank" to everyone who need more air for your air tool.
M. D. Joy
Reviewed in the United States on December 9, 2023
Tank is better than average quality, thick walls, adequately good bungs, decent paint job. The fittings on the other hand are the height of today’s awful Chinesium garbage. The only thing keeping them from leaking out of the box is the oodles of thread seal and over tightening they did on the aluminum fittings. The ‘brass’ looking fittings aren’t brass. The pressure relief shattered on mine. The regulator is cheap garbage and has casting impediments in the passages.I wish companies would start selling quality ASME tanks without fittings for a decent cost. If they’re going to cheap out on everything so much that the product is a disastrous danger at best and a shrapnel bomb at worst.It would save me the hour of grunt work to take off all the useless and dangerous fittings the manufacturer kindly glued on and overtorqued.Good tank if you want to toss all the fittings out of the box and start over! Otherwise look elsewhere. It’s not safe as is out of the box. It needs a quality US made / quality controlled regulator and proper ASME grade US made overpressure device to function safely.One other note. The drain valve is also garbage aluminum and drain ball leaks. The valve fitting is so loose on the drain valve it nearly moved by breathing on it.Manufactures need to stop saving $5 on fittings because it’s leading to throw away garbage products.
Ruben
Reviewed in the United States on October 23, 2023
It has adjustable knobs for air pressure control for the tools being hooked up to this reserve tank. Very well made and the unique long handle makes it easy to carry around the job site with both hands if needed.Comes with all 5 1/4” fittings and Teflon already wrapped around them for a quick and efficient insert. No leaks and performs as it should. Appears to be made of good quality. A little heavy, as most air reserve tanks, but that’s where the nice handle comes in.If you’re looking for an air tank for I’d definitely recommend this one.
Tough Critic
Reviewed in the United States on October 13, 2023
I am very satisfied with the quality and operation of this auxiliary air tank. You can see the quality of the welds and this unit was built for heavy use. I connected it to my 10-gallon air compressor and now I can use air tools for longer working times. With five total connectors this unit can distribute air for five people assuming you have a large enough air compressor. Unlike cheaper units this Metabo is ASME Certified Pressure Vessel. This tank will be the last reserve air tank I will ever need to buy.
Layne Speers
Reviewed in Canada on February 3, 2021
Couldn't be happier with this tank, thank you for a great product.
William
Reviewed in Canada on February 22, 2021
Très bon keg et très pratique autant pour le rought que la finition
Jimbgood
Reviewed in the United States on December 25, 2021
I looked at air tanks for several months before I purchased the Metabo multiport air tanks. My delay in purchasing this product was cost. However, after researching other options and reading reviews about this product, I made the purchase.After receiving the Metabo HPT reserve air tank, I was pleasantly surprised by the quality of the tank. The tank was well constructed—much heavier than similar tanks examined at local supply houses. I have used this tank several times an am glad I pulled the trigger and made the purchase. Expensive comparatively but, well worth the extra money to me. Highly recommend!
Sara R.
Reviewed in Canada on October 22, 2021
Solid tank, but the legs aren’t the same exact length which causes the tank to wobble quite a bit when I’m flat ground.Connection locations are in somewhat bad spots for garage use.Still worth the purchase, as the tank will last for years.
annette pugh
Reviewed in Canada on January 10, 2021
Was better than expected.
KNBC
Reviewed in Canada on July 18, 2020
Use it to run multiple framing & roofing nailers, only regret not getting it sooner. Really takes load off compressor.
Recommended Products
$36.30
$ 15 .99 $15.99
$28.25
$ 13 .99 $13.99