Your cart is empty.
Your cart is empty.Product Description
Jason R.
Reviewed in the United States on March 3, 2025
Used to replace some old Honeywell zone valve motors. Took some engineering and a rivet/rivet gun but worked like a champ
jean yves savard
Reviewed in Canada on February 6, 2025
remplacement du moteur d'ouverture des trapes a air sur fournaise psg 3000
fred
Reviewed in the United States on February 3, 2025
Exactly exact replacement for what I needed
mike
Reviewed in the United States on February 15, 2025
Saved me from a $700 bill from Bonfe.Only took me 20 minutes to install.
Customer
Reviewed in Canada on January 29, 2025
Lasted a year. Half the price of honeywell 1/8 the life span.
Wenxiang Zhang
Reviewed in Canada on January 10, 2025
if only this moter damaged and other parts is good., you can easily replace.but if the spring and other parts is not good, I think you buy whole peice partsis better. not only change the moter.
Phillipiano
Reviewed in the United States on February 27, 2024
Arrived in one day. Good price relative to some other options. Fit perfectly. Installed in 15 minutes. It works!
Joel N.
Reviewed in the United States on December 2, 2024
When installing, pay attention to the positon of the wires insread of the colors. After looking at my other zone valves, it appears the yellow and orange wires were swapped on the motor. Motor worked fine otherwise.
Levis
Reviewed in Canada on December 15, 2024
Remplacement du petit moteur défectueux à l'intérieur d'un actionneur Honeywell Model M847A1080.Il permet de contrôler l'arrivée d'air sur ma fournaise au bois.Facile à remplacer, le "fit" est parfait et tout fonction à nouveau.
Grant Leavitt
Reviewed in Canada on November 30, 2024
So far so good, it has been on and working for a full day
Roger M. Bosworth
Reviewed in the United States on November 15, 2024
My basement heating zone was sticking in the "on" position. (Honeywell V843F).The valve motor has a reduction gear and a spring that get sticky over time - keeping it from returning to a neutral position and closing the valve.The motor is only held on with one screw. Just unscrew it and twist clockwise to remove. Installation is just the reverse. Electrical connection was easy. Just cut out the wires for the old motor - strip them and connect the new motor. They even include two wire nuts to complete the repair.Awesome product. The motor seems a little slower than my old motor, but not a problem.
BillH
Reviewed in the United States on March 14, 2023
We have a four-zone heating system with an oil-burning furnace. I noticed one day that the radiators in our main-level family room were still warm, even though the heat was off for the summer. After doing some online research and watching a couple of videos I realized that the likely cause was this automatic shut-off valve. Apparently, they can become stuck in either the open (always hot) or closed (always cold) position. The valve is constantly being heated and cooled so the mechanical part eventually wears out. Replacing was very simple and did not require any plumbing work. When we had our annual cleaning I mentioned to the technician that I had replaced this valve and he confirmed that I did it correctly and everything was working well. Score one for the DIY homeowner!
Jim
Reviewed in the United States on November 2, 2022
This was a cinch to install - one screw and two wires (held by wire nuts). Most difficult part of the installation was making sure not to lose and/or drop the two wire nuts or the screw. My heating zone upstairs was stuck in an open position, making the upstairs "Hot as Hades". I turned the thermostat way down and tapped the old motor with the handle end of a screwdriver, and heard the valve close. "Maybe it was just stuck" was my first thought. The next time the heat came back on, it was stuck on again. I replaced the old motor with this one (the task took a grand total of about five minutes) and the heat upstairs now works again as it should. FAST delivery, great price, easy install - What more could I ask for? Next test will be to see how long it continues to work. I'm expecting it to last several years - We'll see...
Recommended Products
$239.33
$ 99 .00 $99.00
$29.99
$ 14 .99 $14.99