Your cart is empty.
Your cart is empty.Built from heavy duty aluminized steel our Installer Series performance exhaust systems offer a value price without compromising on the quality built into every component. While the seams are a major point of rust through with some budget systems our fully sealed tubing adds years to your system. Constructed to the same specifications as our top of the line Pro Series we back this line with an industry leading 3 Year Warranty. Dyno Proven: Your MBRP performance gas exhaust system has undergone countless hours on our in-house Mustang 1100 AWD-SE Chassis Dynomometer, hundreds of miles on road and track and numerous tweaks and modifications to get the most out of your truck. From the vehicle specific muffler design to the fully mandrel bent tubing to minimal bend degree angles, your MBRP performance system gets exhaust out fast. An MBRP performance exhaust system is the starting point to getting the most from cold air intakes, programmers, modules and downloaders. Easy Installation: MBRP systems are as much fun to install as to drive with on your truck. Bolt-on, no weld design makes installation a no hassle one and a half to two hour project. Everything is direct fit to the OEM hangers and you get all the clamps and parts you will need Built to Perform MBRP's Jeep performance exhaust systems are built to perform. Designed to maximize exhaust flow and minimize exhaust temperatures your ride will use less gas, last longer and perform better. Real World Proven Behind every Jeep performance exhaust that we sell are countless prototypes that may have worked on city streets but fell short of our standard for the challenge of the off road. Your MBRP Jeep performance exhaust has proven itself in environments ranging from the mud of Rousch Creek, PA to the rock of Moab, UT and the arctic winters of Northern Canada.
Ammon
Reviewed in the United States on July 11, 2024
The quality is good and the sound is amazing. Everything bolted together perfectly on my 1998 Jeep Cherokee the only issue is I can’t install the chrome exhaust end since it’s a little close to the bumper which I don’t mind since I don’t like chrome.
Bill
Reviewed in the United States on December 29, 2024
I never buy any exhaust kit thinking it will fit 100%. I had to make only a slight mod to this exhaust to put it on the Cherokee. Hardware and the build quality met all of my expectations. I would buy again!
Lilly beans
Reviewed in the United States on September 8, 2022
The exhaust couplers leak like crazy. Wouldn’t be a bad exhaust if if everything fitted nice. Welding will be required for this exhaust due to the fact that the way each piece is notched
M. Smithson
Reviewed in the United States on August 29, 2022
Nice system. Worked well. Fairly quiet at cruising speeds but nice sound at idle. I will buy for my other jeeps. Didn't use the sports car exhaust tip. Welded on my old SS dynamax tip.
Scott
Reviewed in the United States on June 6, 2022
This is far better from stock sounds really good but the downfall is the whole exhaust is not the same color as described its a very dull grey/silver color-aluminized steel it fit pretty much perfectly with no complaints besides that and the clamps it came with leak so be prepared to get original style exhaust clamps other than that it sounds amazing has a nice rumble at idle isnt obnoxious while driving overall a very good upgrade from stock
Nate Robinson
Reviewed in the United States on May 18, 2022
Everything fit very well, I was even able to reuse the stock exhaust hanger on rear. There is one on the rear pipe but it’s far enough out of the way to not hit anything. Clamps left a bit to be desired trying to get it sealed, but I had some strips of industrial exhaust boot material that I was able to use with the clamps provided to seal it. Sounds good, along with all my cats on a 2001 rodded out :). Not quite as shiny as the picture but it’s on a Jeep.
Timothée Benadon
Reviewed in France on October 30, 2019
Rapport qualité prix parfait! Super sonorité, discrète, pas trop forte et avec un joli ronronnement! Je recommande
Stephen the Ex-Monk
Reviewed in the United States on March 7, 2017
Vroom. I purchased this exhaust for my 2000 Jeep Cherokee as the old one was literally falling away. Part was already gone somewhere, the rest held in place by forces unknown. I went with this one in part because of how it appeared to look. Yes, I thought of appearance. Silly for an exhaust I know.Quality seems good overall. The welds were even and clean. An interesting variation from the factory is a different rearmost hanger. MBRP utilizes their own hanger which tucks the exhaust up close to the frame.One thing that disappointed me is that the picture doesn't completely reflect the actual exhaust. The difference being the clamps they use. For their stainless exhaust, they use band clamps. For this product, they use traditional exhaust clamps. I elected to add band clamps since I'm sure I'll have to remove all or part of the system at least once over the time I have it. I do own a Jeep remember.Like any exhaust, there's a goodly amount of wiggling and cursing to get everything into place. I think it inevitable with the hangers used from the factory. MBRP's hanger in the rear tucks the exhaust up close as I mentioned earlier, but this also makes it harder to install. I suggest starting the bolt for the hanger but not snugging it down until the exhaust is attached to it. You'll have two ways you can attach the exhaust to that hanger. Only one will work without hitting the springs. Unfortunately this moderately obstructs the accessibility of the bolt you need to tighten down.If you do as I did and utilize band clamps, you need to cut a pair of slots in the end of the tailpipe that matches up to the over-axle pipe. Otherwise the band clamp won't fully tighten and seal. this is a 1 minute task with a metal wheel.Since I fully expect to remove it at least once, and because it's not stainless, I used anti-sieze at each connection. It's messy, but shoudl make messing with the exhaust as painless as possible.The exhaust sounds good and isn't obnoxious. At idle it's got a more throaty sound to it. Not tinny, not like it's passing gas. At cruising speed on the interstate, I hear my tires more than the exhaust. In cab noise level really isn't an issue. No idea how it sounds from behind.Due to misleading picture, I'd remove a star. But I've also had some contact with MBRP's customer service which I found to be top notch. For this reason, I give them five stars.
Lucasp206
Reviewed in the United States on August 20, 2015
Comes with everything needed to install onto my 98 jeep Cherokee 4.0 and sounded great. The removal of the factory system was harder than installing the new one due to rust. Good tuned sound with practically no drone at regular driving rpm. Sounds good when revving and growls at low and high rpm. Would definitely recommend.
Recommended Products
$778.99
$ 99 .00 $99.00