Your cart is empty.
Your cart is empty.Cruise the highway or hit the track with an MBRP Street Profile exhaust. It’s the perfect mix of aggressive sound when you’re into the throttle without being obnoxious on long drives.
james riley walden
Reviewed in the United States on February 4, 2025
The media could not be loaded.
Draka
Reviewed in Canada on February 1, 2025
fit sans problème j'ai seulement du refaire un coup de peinture haut température pour éviter la rouille au mieux
Justaguy
Reviewed in the United States on January 22, 2025
Fit perfect. Hardest part was getting the stock exhaust unhooked from the rubber hanger. Sounds good. Worth the money.
HARY5150
Reviewed in the United States on September 24, 2024
Fairly simple install, just unbolt the muffler, brackets and hangers. Then you will have to loosen the pipe. You will have to wiggle it out quite a bit. It takes a little bit of time, just twisting the muffler to wiggle it out of the pipe, but it will come out. I did this on a stock Jeep Rubicon 4xE. After you get the muffler out, then you put the driver's side hanger. The new pipe, then wiggle it back on and bolt that hangar in. Once you have the pipe orientated where you want, then you tighten the pipe bolt. I have the 2L turbo engine, this pipe did not make this engine when it's running loud with the top off.I could still barely hear it. So if you are looking to make your exhaust louder significantly, you may have to straight pipe it. The two liter engine turbo doesn't seem to put out a lot of noise. But this will save you some weight, and you won't have a muffler.That'll smash on the rocks if you are off-roading.
Alphanatix
Reviewed in Canada on May 21, 2024
Return declined since previously installed. The centerint notch is off position and creates an exhaust leak that sounds raspy and far from premium. It sounds like an uneven leak. Sold it to a 6cyl ‘22 owner at a lost. Not recommended for my specific use.
Customer
Reviewed in Canada on May 13, 2024
Shipping was super fast,once stock muffler comes off install is easy and perfect fit! Very pleased with cold start sound and in town driving,highway it's perfect as it's not much louder then stock,so no annoying racket traveling, very pleased
jakmobile
Reviewed in the United States on May 1, 2024
Don't even bother with this product. The sound it puts out is atrocious. If you do decide to give it a try, make sure you don't damage the muffler because you will be putting it back on. I contacted MBRP directly and basically asked if they would help me upgrade to something better and was told "if you don't like the sound, too bad". It will drone; sounds like trash at startup and you won't see any mpg or hp gain (I didn't expect to it but it would"be been a saving grace". Now I feel like I'm showing up to prom with the girl who nobody wanted to go with and riding a moped. Not cool.Update: attached a picture of what it looks like a month after being installed
Ol Man by the Sea
Reviewed in the United States on January 30, 2024
Lose the 30 lb stock muffler and make your Jeep sound like a Jeep should!Easy installation and it sounds great on the 3.6L engine!!! - it went from nearly completely silent to sounding like a sports car exhaust.BEST BANG FOR THE BUCK OF ANY JEEP UPGRADE! And the Stainless Steel is going to last. The clamp that comes with it is also high quality stainless steel. Gas mileage? - who cares. I’m not saying it doesn’t matter but the sound of the exhaust makes driving safer and more fun. - LOUD PIPES SAVE LIVES!
Kevin M.
Reviewed in the United States on January 3, 2024
If I could return this, I would. This pipe went in very easy. Taking out the stock muffler was way more difficult. This pipe also came out very easily. And the stock muffler went back in easier than I thought it would. Drove it for a couple of days, just couldn’t get past the noise. It wasn’t even a nice sound. I’ve ridden my Harley with straight pipes, and that’s loud, but it sounds good . It has a good tone, tempo and a great beat. So the volume wasn’t really the worst of it. It just sounded bad. That being said, it did offer great clearance, and ease of install, but my Jeep is a daily driver and a weekend warrior. I can’t risk getting a ticket on my way to work every morning. Sorry, but I would not recommend this to any of my friends. If you want to buy it, I’ll give you a real good price.
Mitch Farnum
Reviewed in Canada on January 2, 2024
Getting the stock muffler out was a pain, but thia made up for that with the ease of installation.It's definitely louder, wouldn't say it sounds any better or worse, just louder. There's a bit of drone at highway speeds, but that's also compounded by the noise of 35" mud tires and Wranglers not being known for their sound deadening hahaAfter about 2000km, installed in the fall and now half way or so through winter, it's starting to get a lot of surface rust. I'd suggest spraying it with some high temp paint or rust inhibitor (VHT or Tremclad) before install.
Mani
Reviewed in Canada on April 8, 2024
Just buy it
JGrimes
Reviewed in the United States on August 16, 2023
Installation was very simple. Instructions are thorough and easy to follow. The construction of the piece is solid. I will update the review when it has been installed for a few months to see how it handles corrosive conditions.The 2.0 turbo sounds a little throatier with this tip. (muffler is completely removed/replaced by this part) Cold starts are definitely louder than with the muffler and it is substantially louder while accelerating, although not to the point of annoying. While running at constant speed, even on the freeway at 80 MPH with the roof off, there is no droning exhaust sound. It is a little more noticeable than stock but nothing to worry about. I did not want a loud exhaust and was afraid of the drone I've had in the past with a few vehicles. This one is a good addition for a little more robust sound and the added ground clearance in the rear is a bonus.
John T. Mambourg
Reviewed in the United States on August 11, 2023
Overall 15-20 mins with basic hand tools. Drop both of the exhaust hangers with 13mm and use the 15mm with some penetrating oil on the clamp and done. Wiggle the old muffler off and the new one slides right on. The provided clamp leaves 1-2 threads to fit on smoothly and adjust as needed, then snug down to 45ftlb. Also provided instructions with pictures was nice. Honestly I’ve sone 5-6 diesel and gas truck exhaust, maybe more and this had the best instructions by far. Yes it was one pipe, but still very detailed. Love the sound for the 2.0T and curious how the mpg and throttle improvement is.
Recommended Products
$179.96
$ 70 .99 $70.99
$209.99
$ 89 .99 $89.99
$816.95
$ 99 .00 $99.00
$305.99
$ 99 .00 $99.00