Your cart is empty.
Your cart is empty.
Product Description
The Mastercool 69300 Twin Turbo Refrigerant Recovery System is designed for professionals who require high performance, efficiency, and durability in their refrigerant recovery processes. With a dual-piston oil-less compressor, this system delivers industry-leading recovery rates while reducing overall weight and size, making it a compact yet powerful solution for HVAC and refrigeration recovery applications.
Approved for use with all refrigerants, including mildly flammable A2L refrigerants such as R410A, the 69300 is equipped with a high-pressure cut-off switch for added protection during recovery. Its recovery rates are among the highest in the industry, achieving up to 0.70 lb/min in vapor and 7.7 lb/min in liquid recovery, with a push/pull mode that reaches up to 20.2 lb/min, enabling quick and efficient recovery even in larger systems.
Housed in a durable high-density polyethylene (HDPE) case, the Mastercool 69300 is built to withstand tough work environments. The front cover features bumper guards to protect control knobs from damage, and the simple internal structure allows for easy maintenance and field service.
Whether you're handling residential, commercial, or industrial refrigerant recovery, the Mastercool 69300 offers the power, versatility, and durability needed to get the job done quickly and efficiently.
Specifications:
- Voltage: 115 V / 60 Hz
- Compressor Power: 1/2 HP dual-piston oil-less compressor
- Recovery Rate:
- Direct vapor: up to 0.70 lb/min
- Direct liquid: up to 7.7 lb/min
- Push/pull: up to 20.2 lb/min
- Operating Temperature: 32°F to 122°F
- Weight: 28.3 lbs
- Dimensions: 18" L x 10" W x 14" H
- Case Material: High-Density Polyethylene (HDPE)
- Refrigerants Supported: CFCs, HCFCs, HFCs, and A2L mildly flammable refrigerants (R410A, R22, etc.)
- Safety Features: High-pressure cut-off switch
ellis jacobs
Reviewed in the United States on April 18, 2023
I haven't used it yet but id think with 3 bolts in the bottom of the box & one plastic on the gauge not fully on. But im sure its fine
Felix Rivera
Reviewed in the United States on July 25, 2021
Muy bien necesito que me explique cómo echar a funcionar esta máquina
DrShock
Reviewed in the United States on January 2, 2021
So finding gear that's made in the USA nowadays is low key rare. Given the low quality of most import gear I will buy American when the choice is available making it a plus for me that this Mastercool 69000 was made in the states. The 69000 recovery unit is prosumer entry level grade. I tend to prefer Mastercool brand equipment for my automotive service needs, so when I decided to get into vehicle refrigerant recovery this was my top choice and I would say it compares well with the Robinair RG6. I went with this one out of brand preference/experience plus the low pressure cutoff feature. You need to be EPA clean air act section 609 trained and certified to be using this machine (or any refrigerant recovery machine for that matter) for automotive use.Pros: The 69000 has not just a high pressure shut off switch for safety, but also a low pressure shut off switch so you don't have to hang around watching it. Mastercool has a number of accessories and is a large well known American company to buy equipment from. Their warranty on this model is one year. In operation it pulled 3 lbs of R134a in under 15 minutes. It's on the quiet side as well. Simple easy to follow instructions for a prosumer or professional.Cons: It's pricy. Not much packing material in the box so better hope the shipping carrier takes care. There's no filter/drier included. And there's no oil separator either. Though you can add both by purchasing the Mastercool 69500 accessory kit separately. Build quality was not what I've experienced in the past from other Mastercool gear. Two of the front faceplate sheet metal screws literally fell out from vibration on the first use (I recommend going around all the philips heads and tightening them down before using with some loctite as a number of mine were loose). This factory defect experience gave me pause about the "Made in the USA" quality but the unit has been working fine since - having been used on three vehicles now without further incidents as I write this review.No regrets on the purchase, but I still took off one star for the out of the box build quality.
pdeltax
Reviewed in the United States on May 23, 2020
I am a DIY auto technician and this machine works well for me. The instruction may be a bit confusing to some, but read it carefully if this is your 1st time. It's a straightforward operation.
Jimmy
Reviewed in the United States on May 6, 2016
No good spend the money far nothing
DJ from Iowa
Reviewed in the United States on May 25, 2015
Works as advertised
William Woolford
Reviewed in the United States on October 12, 2015
Works well and efficiently
Recommended Products
$75.63
$ 33 .99 $33.99