Your cart is empty.
Your cart is empty.This BladesUSA 8-Tier Wall Mount Sword Stand (model WS-8W) allows you to show off your collection in style. This rack mounts directly to your wall allowing for you to display up to 8 swords in no time at all. Keep your collection visible but out of reach of little ones and free up space from the surfaces of furniture by having your whole collection in one eye-catching place at once. It's made of wood and painted in a flat black that will go with any decor.
Placeholder
Reviewed in the United States on March 9, 2025
Excellent!!!
Customer
Reviewed in the United States on February 17, 2025
The paint on this thing is terrible, it marked up my wall, floor, and table as I put it together and tried to hang it. Also, the anchors don't fit the screws it came with. If you attempt to put a screw into an anchor, the anchor will push into the wall. I currently have one anchor and screw stuck in my wall, and the only way to get it out will be to cut the screw or tear the wall up. I am not a novice, I have put up many sword racks in my schools and my homes over the years. This is absolutely the worst experience I have ever had. I am so angry I don't even have words. I hate this product.
Nero
Reviewed in the United States on February 13, 2025
Very satisfied with this Holder, already ordering a 2nd one for the rest of my cosplay swords & lightsabers.
Zee Zee
Reviewed in the United States on May 31, 2024
4 stars only due to no instructions with confusing wooden inserts due to seemingly not fitting.Overall for the price this is really good especially when you get it put together. I finally found something I can safely put my bo staffs, and I'm buying another for my short staff, practice bo.You really should either make sure the nails that are provided go directly in wooden studs and if both aren't, Make sure you get drywall screws and anchored them. Don't put this up on the wall any lazy way as it could cause a bad injury especially if you have cats or dogs or any type of movement that could run into it. Try to install where it can't fall on anybody as well like above the dresser in the corner.You can see in another picture they broke the wooden screw because they try to push it all the way in. What I got is a heavy lock and I pushed it against the top of the screw and hammered the lock down onto the wooden screw. All you have to do is make sure it's nice and snug about 1/8 of an inch deep. If you try to force it in you will break it.
Tia H.
Reviewed in the United States on December 28, 2024
Not bad, honestly. There’s only hooks on the top, but I think it would be relatively easy to add two more on the bottom if you wanted. We didn’t, and it holds just fine in the wall studs. It’s not a super high quality rack, but it’s holding some of my heaviest swords, so for the price I’m pretty happy. One thing I will say: if you have swords with basket handles that are overly big, this won’t work—it’ll push the rack away from the wall. I have a rapier that isn’t hung because of this (it wouldn’t fit anyway lol) so just be aware. Otherwise it’s a good little rack
MrChamberlain
Reviewed in the United States on August 10, 2023
This was very easy to assemble and install. And I thought the general quality was better compared to similarly priced racks. I am sure this could be particle board but it feels like genuine wood. Paint and finish are nice. It comes in 4 pieces and assembles using small pegs much like traditional Japanese construction. The mount points are 16 inches apart ideal for mounting on most stud walls… not the case for me but made for very easy measurements and installation.
J-F Fortin
Reviewed in Canada on February 3, 2022
I couldn't wait to write the review for this based on all the bad reviews it got and I don't understand why. First, mine was well packaged and not broken at all and arrived quickly. Second, yes it is not the sturdiest type wood but also not styrofoam! As you can tell by the pictures, it is sturdy enough to hold bokans, real samurai swords and force fx lightsabers no matter the type of hilt, even the Dooku one as you can see. Third, I don't understand how and why so many people have a difficult time with the assembly. I actually used zero tools except a quarter ($.025) and a square head screwdriver. Please read this before you assemble!!! If you try to push the pegs through the holes while the slats are in perfect position, it is very difficult and won't work. Before you assemble take a quarter or a nickel and push the wood pegs through the holes BEFORE assembly. You push them through with the quarter and to get them out, push with a square head screwdriver so you don't damage them. This way, you have already created the space needed for actual assembly. Once you have pushed through and out all 4 pegs, then, do it again with the slats in place for proper assembly. That's it, that's all. Zero issues, took me like 5 minutes. If you push the pegs through once before assembly, they will go in very easily when tight to the slats. Honestly folks, for the price, there's nothing wrong with this product in fact I am getting a second one to fit all I have. The wall mount is very easy it's not even worth mentioning. It's very sturdy despite what it feels like out of the box. Once it's up, it proves it's strength and value. Definitely recommend! Just be smart. Check out the pics, looks great!
Allison
Reviewed in the United States on February 11, 2021
~:::~ I will make proper reviews of everything in the future ~:::~The rack definitely held its own agains time and weight. The sturdiness is very good.Assembly wise, the small wooden pieces that held it together was extremely difficult to fit into their required holes. Using the tools provided seemed strenuous.Using my own tools to assist seem to do more damage than good.Other than those minor details, it still holds up very well.The usual problem I have with these racks (hook in back breaks off) has not occurred.Well put together.~:::~ I’ll add more details on my future review ~:::~🍄💕
Maciej Grabowski
Reviewed in Canada on November 27, 2021
No dislikes here , teak me 5 min to put together and 10 min to mount on the wall . Good product for good value . Recommended .
Damon
Reviewed in the United States on November 13, 2021
This is a pretty good katana wall rack for the price. It is made of particle board, if you're looking for solid wood look elsewhere. It's extremely easy to assemble. But like a lot have said, use a hammer to tap in the wood pins that holds it together. I put red felt on it so it wouldn't scratch the sayas.When I received it there was a small nick in the wood, I used a sharpie to color it in and you can't see it unless you know where to look now. Also one of the wood pins to assemble it was broken in the package, I used a small black screw and again you don't notice it unless you know what to look for. The mounting hardware is cheap, just 2 nails are included to hang it from. It wouldn't have been any more to include a couple screws and plastic anchors to mount it with. I already had some so I didn't have to go out to get any.I knocked off two stars because of the nick in the wood, broken wood pin and cheap mounting hardware. But I'd buy more if I needed them.
Megha Vivek Gaonkar
Reviewed in Canada on April 10, 2021
I bought it for arranging Indian Basuri (bamboo flutes). It has served the purpose.
Rick C
Reviewed in Canada on September 15, 2019
Unit is very light and easy ro work with. The frame comes out vert strong. Holds 8 Katana very easily. I could nor use the nails or screws of wall plugs because the sell was built with a concrete slab. Hung up stand using 4 Commander wall brackets each for 5 ib weight. Units seems very secure after the 3rd day. Hope all goes well Had to add 4 more hangers to better secure stands on wall.
Alejandro Beas
Reviewed in Mexico on June 19, 2019
Es lo que se solicito, algo frágil pero funcional.
Recommended Products
