Your cart is empty.
Your cart is empty.Perfect for making flat lightweight items magnetic. Magnet requires direct and full contact with steel for maximum hold, therefore it is best to make sure that magnet is flat. Magnet & adhesive work best when applied at above 60 degrees Fahrenheit or 15.56 degree Celsius. For best results: 1)Allow magnet to reach room temperature then cut magnet with heavy duty scissors or hobby knife. 2)Apply magnet's dark gray side to large metal surface for several hours to flatten curl. Do not roll magnet strip in opposite direction to remove curl. 3)Clean applicable surface for adhesive with isopropyl alcohol and allow to dry. 4)Peel back liner from the adhesive and place item on adhesive. 5)Apply adhesive to surface with firm pressure 6)Allow adhesive to cure for a minimum of 24 hours or 72 hours to reach maximum bond with surface.
Normand Lavigueur
Reviewed in Canada on July 22, 2022
La description indique une longueur de 50 mètres mais le produit à une longueur de 50 pieds , Voir photo en attachement
Andrew Girard
Reviewed in Canada on March 29, 2022
Easy to work with. Great holding strength. 2 x 3ft holds a 4ft x 4ft coraplastic sign
Customer
Reviewed in Canada on September 2, 2021
Magnet is good, but it's not 50 meters, it's 50 pi
Murray
Reviewed in the United States on December 29, 2017
Very weak, not sure what we could use this for.
MasterLee
Reviewed in Canada on January 29, 2017
magnet is weak , I bought it mainly for my xiaomi vacuum robot as a virtual wall , but it didn't work.I returned the product.
Customer
Reviewed in Canada on November 25, 2016
Great value not as strong as expected made changes to design and product still serves excellent !
lascatx
Reviewed in the United States on October 13, 2016
I bought this to hold panels made from nylon window screen material in place. One section goes aound and over a frame and the other panel creates a door for accessing the enclosure. I used a strip on the sides of each panel. I did have to test to determine which way the two strips would attract each other to keep the enclosure shut, and I have each strip sewn between two strips of the screen to make sure it doesn't come loose (the enclusre is outdors, gets wet and the screen had been removed and put through the washing machine), but it has worked. I can easily open the enclosure, clean it and close it again. It was quick and easy an enabled me to protect and release 46 Monarch caterpillars. I have another batch in there now.
Recommended Products
