Your cart is empty.
Your cart is empty. Description:
This is an easy-to-use combination product for customers.
NRF24L01+PA+LNA Wireless Transceiver RF Transceiver Module:
PA Gain: 20dB
LNA Gain: 10dB
Frequency: 2.4GHz~2.5GHz
Range: 800+ meters line of sight
Multi-frequency: 125 frequency
Transmit Operating Current(Max): 115mA
Receiving Operating Current(Max): 45mA
Board dimensions: 40.7mm x 15.5mm x 12.2mm
Operating Voltage: 3 ~ 3.6V （Recommended 3.3V）
NRF24L01+ Breakout Adapter:
This is a simple socket board which is for NRF24L01 Wireless module
Small power on SMD LED indicator
Voltage Regulator Input Voltage (connected to VCC): 4.8V to 12V
Voltage Regulator Input Voltage Max: 15V (we recommend staying below 12V)
Pin Quantity: 8Pin
On-board: AMS1117-3.3 chip
Compatible: Ar duino and Raspberry Pi
Tips:
Wireless module operating voltage is generally 3.3v, while the ordinary 51 microcontroller 5v, this module is easy to shop wireless module with 51 single system board used in conjunction.
Package Including:
3 * NRF24L01+PA+LNA Wireless Transceiver RF Transceiver Module
3 * SMA Antenna 2.4G 1100m
3 * NRF24L01+ Breakout Adapter
Caleb long
Reviewed in the United States on March 1, 2024
All 3 of the breakout board adapters work but only 2 of the nrf24L01 models work The one that's is not working is unable to transmit any data at all
M/G
Reviewed in the United States on November 27, 2024
All 3 power modules are garbage and do not function/will not allow Transceiver to function properly. 1 transceiver DOA. Power modules appear to have internal shorts/connections between power connections and signal connections.
Glen Eccles
Reviewed in the United States on November 12, 2023
Usually people who are into things like this are people who like to tinker. These worked well 50 feet from my house and outside in the summer and winter.
josh
Reviewed in the United States on August 17, 2022
worked fine after soldering capacitor on. didnt work at all before that.
Robert
Reviewed in the United States on May 7, 2022
I used it with teensy 4.1I was having all kinds of problems with it until I used a separate 5v power supply.Works Great, I am impressed with the speed and distance!//Teensy 4.0 Pin nRF24L01+ Pin----------- ---------------Ground 1. Gnd3.3v (next to pin 23) 2. VccCE = 9 3. CECSN = 10 4. CSNSCK = 13 5. SCKMOSI = 11 6. MOSIMISO = 12 7. MISOno connection 8. IRQ -- Also --RF24 radio(9, 10); // Teensy 4.1 CE, CSNradio.setDataRate(RF24_250KBPS);
Brandon
Reviewed in the United States on October 13, 2022
Worked after soldering on a 10µF capacitor to the antenna board across the ground and VCC. Good transmission consistency with an Arduino Uno when powered by 5v from the Arduino board (connected to the small voltage converter board).
George Washington
Reviewed in the United States on September 26, 2021
100 feet away from my receiving unit. 3 walls total. I'm using the lowest power setting (setPALevel(0)). You have to have a very good power supply for the units to get the most of them.
Amazing Customer
Reviewed in the United States on February 3, 2021
I must be one of the unlucky customers with this product. I have a working program (Ping Pong) to test the RF24's which works flawlessly for the model down version. When I replaced the models with this one, things didn't work. I put some distance between them thinking they were too close together, and also tried setting the strength to MIN, hoping to help the distance issue. Nothing.. Then I found the issue, upon inspection of these, there were all sorts of poor soldering. One of three worked. 2 of them had multiple soldering issues where the SMD's weren't even remotely close to be seated correctly (not even on their contact pads). Whoever solders and inspects these things needs to have their eyes checked or be given breaks so they'll actually pay attention when they're soldering..
Recommended Products
