Shopping Cart

Your cart is empty.

Your cart is empty.

Makeblock Bluetooth Adapter for PC Laptop Computer Pair with mBot/Codey Rockey/Ranger/Ultimate/Starter

Free shipping on orders over $29.99

$15.00

$ 7 .99 $7.99

In Stock

About this item

  • USB interface, plug-in directly to achieve Makeblock Bluetooth wireless programming device.
  • Only for Makeblock Bluetooth devices.
  • High transmission efficiency, low latency data transmission.
  • No cable needed,easy to carry and use.
  • Technology is more mature and the signal is more stable.



Duncan MacRae
Reviewed in the United States on February 18, 2024
This only seems to work if the bot is 6 inches from the USB plug. Save your money and just use the included cord.
Customer
Reviewed in Canada on December 10, 2024
It works. It is a low power way to communicate with MegaPi board.
LL
Reviewed in the United States on January 11, 2024
Install/linking instructions not well written or easily understood
Eugene Veselov
Reviewed in the United States on January 10, 2024
First I tried to make it work without reading any instructions: plugged the adapter into the PC and just waited when the mBot give me a signal that it is connected. Silly me. Then I googled how to connect adapter to mBot and it said what to do: (1) plug it to pc; (2) press a button; (3) Keep mBot near and turn it on. I expected that in "connect" command a new source (in addition to UCB) would appear. Nop. The decided to use it anyway (as USB) - PC was successfully connected, and everything started working perfectly. So reading manuals is useful. Though treating WiFi as USB was a bit confusing. Anyway, everything is working after 7 minutes, and I am now preparing to my grandson arrival.
William Mueller
Reviewed in the United States on December 19, 2023
This is what you need for Mbot. However take it out when not using as it appears to interfere with other devices
Hay M. Tran
Reviewed in the United States on January 25, 2023
It is easy to connect and worked with out with no problems.
La Luna
Reviewed in the United States on August 8, 2022
I changed my review from 1-star to 5-star. Yes, it was an unpleasant experience troubleshooting bluetooth connection (live mode), wasn't able to access the forum. But the support team saw my review , gave us an apology and offered to send over replacement and extras. We finally got it to work, we even went to their official website and ordered more add-on to show support. It's not easy to create something that is non-programming-parent-friendly. We don't mind the glitches as long as they have someone to listen and back up the product. Thank you!Original review:I ordered this for my son because we couldn't get mbot to work with his PC's bluetooth receiver. Fine I pay $15. Still doesn't work with mbot v5.4 then I tried signing up for a forum account so I can reaching someone to resolve this. Their signup system doesn't work, I could reach no one. Do you know how much time I invested on this just so my kids can run mbot live without a USB cord attached to the computer? So disappointing. If your software is not ready, do not release it. And if your device cannot support it, LET BUYERS KNOW!
Bob Stevenson.
Reviewed in the United States on February 19, 2022
It came quickly and, so far, has worked well
LeaveMeAlone
Reviewed in the United States on April 4, 2021
Plug and play, works exactly like the wired USB cable connection only wireless. No bluetooth configuration or driver reconfiguration needed.
Jose Manuel Ruiz Gutierrez
Reviewed in Spain on July 28, 2019
Muy útil.
Igor Micheletti
Reviewed in Italy on June 29, 2019
Senza questo device mbot ranger funziona solo con collegamento USB via cavo
Gökhan Tuncay
Reviewed in Germany on March 7, 2019
Perfekt. Funktioniert einwandfrei.
Patu
Reviewed in Germany on February 14, 2019
in Kurzform:* Der "Bluetooth Dongle" ist weit mehr als ein normaler Bluetooth-Stick - er erlaubt den Betrieb des mBot sowohl im Scratch-Mode als auch im Upload-Mode, hat also sozusagen die Funktionalität eines "drahtlosen Kabels". Entsprechend erscheint er im mBlock-Verbindungsmenü auch als "USB" (COM-Port), nicht als "Bluetooth". Gerade der wichtige Upload-Mode ist über eine Standard-Bluetoothverbindung nicht zugänglich (zumindest in mBlock v3 bzw. mBlock v5.01), nur mit dem Dongle.* Der Verbindungsaufbau PC zu mBot erfolgt über den "Bluetooth Dongle" wesentlich schneller und unproblematischer als mit einem internen oder externen Standard-Bluetoothadapter, zudem ist die Verbindung stabiler.Etwas ausführlicher:Man kann den mBot zwar über einen generischen Bluetoothadapter aus mBlock heraus ansprechen, das funktioniert leider aber nicht sehr zuverlässig, und man handelt sich etliche Beschränkungen ein: Mit der aktuellen mBlock-Version [v5.01] klappt es nur mit Bluetooth 4.0, es ist weder abwärts- noch aufwärtskompatibel. Das Koppeln dauert lange und geht nicht verläßlich (zumindest bei unseren beiden Rechnern). Zudem steht ausschließlich der Scratch-Mode zur Verfügung, bei dem das erstellte Programm auf dem PC läuft und per Bluetooth nur Laufzeit-Steuerbefehle an den mBot übertragen werden. Ein Upload des eigentlichen Programmcodes auf den mBot (so daß er ohne PC-Verbindung auf dem mBot selbst abgearbeitet wird) ist leider nicht über normales Bluetooth möglich. Da Upload der viel häufiger benötigte Modus ist, stöpselt man ständig das Kabel ein und aus.... (Scratch-Mode ist zwar nutzerfreundlicher, aber viel zu langsam schon bei einfachen Timinganforderungen, zudem wird bei nicht perfekter Funkverbindung gerne mal ein zufälliger Programmschritt ausgelassen - das verdirbt schnell den Spaß.)Der "Bluetooth-Dongle" hingegen vereinfacht das Leben enorm: An den PC gesteckt (plug & play unter Win10), einmal auf die Pairing-Taste gedrückt und den mBot verbunden - die Bluetooth-Verbindung ist augenblicklich da! Das Pairing bleibt erhalten, beim nächsten Mal muß nur noch der mBot eingeschaltet werden und ist direkt wieder gekoppelt. In der mBlock-Software erscheint der Dongle genau wie ein Kabel, und funktioniert auch wie ein Kabel - nur eben ohne :-) Das schafft Flexibilität: Sowohl Scratch-Mode, als auch Upload gehen nun drahtlos - zudem kann man bequem zwischen beiden Modi wechseln, da der für die Rückkehr zu Scratch-Mode nötige Reset der mBot Firmware nun auch drahtlos möglich ist!Obgleich man sich sicherlich gewünscht hätte, daß das alles bereits mit generischen Bluetoothadaptern ginge, ist es unter den gegebenen Umständen eine absolut lohnenswerte Anschaffung.NB: der Hersteller-Listenpreis ist 14,99 Euro - sofern der Dongle hier nur anderweitig zu Mondpreisen angeboten wird, sorgt eine Mail an den freundlichen Makeblock-Service für raschen Nachschub :-)
Recommended Products

$42.00

$ 21 .99 $21.99

4.4
Select Option