Your cart is empty.
Your cart is empty.Product Description
How to Cut Successfully: 1. Make a half-moon-shaped notch on the glass/tile/stone drill with 45 degrees. 2. Slowly raise the drill bit to 60 degrees, and then lightly drill. 3. Reach 90 degrees and continue drilling. 4. Finally, the glass/brick/stone is drilled. This technique requires the drill bit to "shake" instead of applying steady pressure all the time.
Warm Tips: 1. Please add water as coolant and drill slowly. 2. Start drilling the surface at an angle of 45 degrees and align 90 degrees when forming the hole. 3. Never use an electric drill when the machine is in a hammering state. 4. The hole does not need to be laborious, because the cutting is clean.
JDN
Reviewed in the United States on January 13, 2025
I was skeptical, but got these to drill holes in rocks for a craft project for my wife, but it turns out they drill holes inn rock quite well. The shanks are dremel/rotary tool size, a little too smail for a 3/8 " or 1/2" drill. I managed to drill the needed holes in ahalf a dozen rocks before I finally manages to break one (my fault), but that was way more use out of one than I would have expected.
Kindle Customer
Reviewed in the United States on June 7, 2024
I had to drill one hole in porcelain tile for a DIY shower remodel. I didn't want to spend $40-60 if I could use a cheaper saw that likely I'll not use again so I took a chance on this. It worked better than I'd hoped. I was a bit concerned that it didn't have a centering drill, but I was also concerned that the centering bit just added to the stress on the tile and a would be possible source of cracking.I drew a circle in a practice tile and carefully worked my way around the circle to get a starter groove and I kept the groove wet. It worked pretty well and I didn't risk damaging a tile I was going to use.Then I cut the tile to use. Already, the blade didn't seem as sharpe, but slowly and carefully i cut a nice hole.I'd recommend to a DIYer who only needs to cut a couple of holes, but not to a pro who needs to cut a lot of holes. It did work great for me.
Miguel
Reviewed in Mexico on May 27, 2024
Excelente producto, me permitió realizar la perforación fácilmente y mucho más rápido de lo que esperaba.
H88
Reviewed in the United States on March 24, 2024
A fraction the price of big box stores name brands and in my opinion work just as well for DIY. For professional repeated use probably not, but I've used mine a few times and still does the job even thru porcelain and ceramic.You can use the tilt technique, or I prefer to make a jig in a piece of 3/4 plywood with a same sized wood hole saw first, then carefully clamp it to my work. If you can't clamp it, have someone hold it while you get it started. A jig can slide a bit on glossy tile, but with practice it's pretty easy to master. You could probably stick on some rubber cement between the two or a self stick rubber pad to keep it from sliding around. You only need the jig to get the full circular cut started, then it's easy to hold in place without the jig in your way. More accurate than tilt method.I use higher speed on tilt method to get cut going. Seems to move around less than on slow speed. Use a little water to cut easier and save the diamond edge.With both methods, I slightly tilt saw from side to side and in circular motion as I'm cutting to keep it cutting thru. Makes a nice clean hole. Be careful of sharp cut edges.
Jay
Reviewed in the United States on December 16, 2024
I only needed to cut 2 holes. This did the trick. Pleased with performance at low price. It's probably only good for a few holes, but if you are a diy guy that needs to cut only a few holes opt for this instead of the expensive brands.
jason benoit
Reviewed in the United States on December 15, 2024
Needed to drill a hole for a water spigot on the tile countertop. Took a chance on the cheapest diamond hole bit I could find and it paid off. I was really not expecting it to cut through this easily . Used a little bit water, drilled very slowly at an angle, moved vertical, cut through in about 40 - 50 seconds. Unbelievable 👍
Terry B.
Reviewed in Canada on October 8, 2024
Worked for my bathroom reno. I dont think it would last if I used it everyday as a professional but for the amount of times I will use it, its perfect.
Frosty NY
Reviewed in the United States on October 25, 2024
The drill bits are sharp and worked perfectly to cut through glass. I was able to make my bongs a lot easier.
C.Dan
Reviewed in the United States on October 20, 2024
I was impressed with this drill piece. It cut through the wall stuckle easily. Worth the money, save a lot of time.
Family Man
Reviewed in the United States on April 8, 2024
When I embarked on the harrowing journey of bathroom renovation, I thought the toughest challenge would be choosing between fifty shades of beige for the tiles. Little did I know, the real test of my DIY mettle would come when I needed to drill a hole through my newly acquired, stubborn-as-a-mule porcelain tiles. Enter the Luomorgo 35mm Diamond Hole Saw - the cape-wearing, laser-eyed superhero of drill bits.The moment it arrived, packaged like the crown jewels, I knew my prayers had been answered. Not only did it promise to glide through porcelain with the grace of a ballroom dancer, but it also boasted the ability to tackle glass, ceramic, and marble - essentially, the Avengers of surfaces. With my drill in hand and the Luomorgo bit attached, I felt like Thor wielding Mjolnir. Spoiler alert: the tile didn't stand a chance.Pros:- Mightier Than Thor's Hammer: This bit goes through tough surfaces like a hot knife through butter, or Thor's hammer through... well, anything.- No More Rusty Business: The nickel-plated surface means it’s more resistant to rusting than my resolve to finish this renovation.- Cuts Like a Dream: The cut was so smooth, my tiles probably didn't realize they'd been drilled until it was over.- Chip Evacuation: The side chip holes ensure waste removal is cleaner than my language when I finally saw the hole.- Wide-Ranging Powers: From glass to granite, this diamond hole saw is like the utility belt of Batman - prepared for any scenario.Cons:- Too Smooth?: The cuts were so effortless, I was momentarily deprived of my DIY war stories.- Addictive: I now wander my house, looking for things to drill holes in. The dog is getting worried.- Water Required: Needs water for cooling, slightly dampening my walk-off drilling fantasies in a cloud of practicality.In the epic tale of my bathroom renovation, the Luomorgo 35mm Diamond Hole Saw emerged as the unlikely hero. Not only did it tackle the daunting task of drilling through porcelain with aplomb, but it also proved itself a versatile tool for a range of materials. It's the Batman of my tool belt, the Thor in my toolbox. With its sturdy build, rust resistance, and smooth cutting capabilities, this diamond hole saw is a must-have for any DIY-er facing their own home improvement odysseys. Just remember to add water and proceed slowly – patience, young Padawan, the Luomorgo does not disappoint. Now, if you’ll excuse me, I’m off to drill holes in everything... responsibly, of course.
Chris B
Reviewed in Canada on January 22, 2023
Found this to be the proper tool for the job. Installing new shower and need something to cut a complete circle for the water controller. Best way to use is make a jig and tape it to the tile and add water while drilling. Perfect cut!!! Highly recommended.
David H.
Reviewed in Canada on October 29, 2022
Not very durable, might go through a relatively soft ceramic tile, but anything thicker than 1/8", waste of time. The diamaonds just peel off and the cylinder overheats and bends.
Ana I.
Reviewed in Mexico on December 13, 2021
Corte suave, perforó en vidrio en un instante, no se nota desgaste en la pinta de la broca. A mí parecer, ideal para trabajos caseros y semi profesionales
Recommended Products