Your cart is empty.
Your cart is empty.Organizes 1/4" Fractional and Metric Sockets.
Chase
Reviewed in the United States on August 8, 2024
The quality is unbeatable at this price. The magnet is very strong. Won't be losing your sockets using this. All my 1/4 sockets fit perfectly into the slots. Even had some left over for a 3 inch extension and some other drivers.
David
Reviewed in the United States on March 23, 2024
I would leave a five-star review because the quality of the material and the magnet are fantastic but the slot holes are kind of brand specific if you have heavy walled impact sockets they are not going to fit into these. My snap-on sockets fit in there but my Mac sockets will not.My Carlisle impact sockets fit perfectly but harbor freight brand or power built and Stanley are too thick to fit into these holders which I bought them to organize my miscellaneous sockets which did not work out so I ended up giving them to a co-worker
Daves
Reviewed in the United States on December 19, 2024
Wish I Had This A Long Time Ago - Magnet Works Great
Edwin
Reviewed in the United States on November 20, 2024
It keeps my sockets secure and well organized with ease of access unlike other holders.
Christopher P.
Reviewed in the United States on October 3, 2024
Worked perfect, fit in my toolbox And sockets are not everywhere
JC
Reviewed in the United States on October 26, 2024
These work really well for organizing, storing, and accessing sockets. The holder lays flat in the toolbox drawer, so you can use these in shallow drawers. I use drawer liners, and don't have any problems with picking up the entire holder (i.e. it doesn't get stuck to the drawer).I personally don't stick them to the side of the toolbox, as I don't want to risk any sockets falling out / getting bumped. The magnet is good for holding the sockets in place, but if you drop it, or bang it on something, then be prepared to chase a few. I haven't really had any problems with this though.There is room to mark or label the socket size (using permanent marker), which makes finding the socket you're looking for really painless -- and makes putting them away simple. If you have an apprentice/helper/gopher, this makes life easier for everyone.The deep-well side is deep enough to hold short extensions, or adapters and knuckles (or wobble).However, if you have a fully loaded Holder, picking it up solely by the handle tends to cause a crack over time -- not in the handle, but actually at the end of where the magnet is mounted, where the holder tends to flex. This isn't a dealbreaker, but is a design flaw to be aware of.I prefer the bright orange over the red, purely for contrast/readability of my labels.Regardless, I use these in every toolbox I own. Well worth it.
Pete
Reviewed in the United Kingdom on September 28, 2023
The sockets also keep disconnecting. Oh and you’ll need slim sockets to fit
Dani DC
Reviewed in Spain on February 20, 2023
Tenía grandes espectativas en este producto ya que su precio es elevado para lo que es. Pero, al probarlo, he comprobado que con los vasos normales va bien (por eso las 2estrellas) , pero los largos no tiene fuerza suficiente los imanes y se caen. Decepción
Armando Pacheco
Reviewed in Mexico on October 30, 2023
Funciona muy bien el imán es muy fuerte estoy muy contento
ASPI
Reviewed in Canada on October 26, 2023
Very good quality
Dave R.
Reviewed in Australia on October 14, 2021
As stated pay attention to the length and size of this product if space in your tool storage is limited - easier to use than some other twist type socket rails - being plastic not sure it would survive too many drops on the floor and if you do your heavy sockets will fly off everywhere. Good for taking all your sockets to the car you are working on. On balance an ok purchase.
James Jameson
Reviewed in the United States on January 7, 2019
The media could not be loaded.
Mark Thomas
Reviewed in the United States on September 15, 2016
This socket holder from Lisle is exactly what I was looking for. I bought an entire socket set of regular and deep-well sockets from Harbor Freight (I don't mind going to Harbor Freight for simple things like these). When purchased, they came in this ridiculously hard to open bracket that I needed a screwdriver and cutters to open up. Once the bracket packaging was opened each individual socket was attached to a main holder via some black plastic clip that held the sockets tighter than a drum. I had to use a hammer and screwdriver to remove the socket holder from the socket itself. Very very frustrating and I did not want one of those metal rails with the small square holders because I have had issues with those for most of my adult life. Since I bought a set of 8 regular and 8 deep-well sockets, this Lisle holder was the perfect size and I can even add a few more if need be. Once it arrived, I knew it was of good quality because it had some substantial weight to it. I don't mean that in a bad way, to me this meant that it would actually hold the sockets in place and not go anywhere if I moved it or dropped it on the workbench. I plan on mounting this to the wall and so the magnet that holds everything in the middle needed to be rugged and durable, which it has proved to be so far. This is as neat and clean as you can ask for with a price that is cheaper than some of the other socket holders I have seen. I am very happy with my purchase and might buy another one for when I get a full metric set. Highly recommend
Recommended Products
