Your cart is empty.
Your cart is empty.Product Description
Easy to use Sprayable Metal flake
MIX
Mix 1 Packet with 1 pint (16oz) of Clearcoat (recommended) or clear basecoat (binder) NOTE: Flake will layout smoother and is easier to sand once dry when mixed with clearcoat.
SPRAY
Use a 1.4 mm or bigger tip size Note: The LiME LiNE 1.3 mm basecoat/clearcoat gun works with this flake.
Spray 3 coats of flake mixture over black basecoat for best results.
Spray an additional 3 coats of straight clearcoat to bury the flake texture.
SAND
Once dry Sand smooth LiME LiNE wet or dry DA sander and LiME LiNE 600 grit sandpaper
DESIGN
Make custom designs with LiME LiNE Precision Tape then airbrush with candy paint to dye the silver flake to your desired colors.
1. Sand & Clean
- Refer to clearcoat data sheet for dry times
- Hand or machine sand with 600 grit sandpaper
- Sand smooth (NOTE: Paint will not adhere to un-sanded clearcoat)
- Clean with glass cleaner
2. Design with LiME LiNE Tape
- Create Panels, flames, pinstripes or any other designs
- Start by following the shape of the part and build off of that.
- Let your creativity run wild
3. Mixing Your Paint
- Use transparent paints (Candy Paint) this changes the color without loosing the sparkle
- Works with water or solvent base automotive paint
- Apply with an airbrush or paint gun
4. Customized graphics
- Using a black basecoat or darker color candy your able to create patterns.
- Spray through lace fabric for stunning subtle floral effects
- Use stencils to create hard lines and detail
Thomas Kaminski.
Reviewed in the United States on February 16, 2025
The mix ratio is a bit heavy. If you follow instructions for my application, I needed about half of the packet per pint, then thin the clearcoat
Matt
Reviewed in the United States on September 22, 2024
The media could not be loaded.
Rick
Reviewed in the United States on May 31, 2024
Super fine metal flake is just what I was looking for. Not disappointed! Very pleased.
John
Reviewed in the United States on December 4, 2024
I always use lime line love them!!!!!
Mike
Reviewed in the United States on October 26, 2024
Just follow the instructions on the back. Its super easy the use and apply. It's very worth the money.
JAS
Reviewed in the United States on November 10, 2023
First time spring, flake, and it came out perfectly. Directions on the bank make it very easy to use and you can spray it with a 1.4 nozzle tip laid out very nicely. Fantastic product!
Logan
Reviewed in the United States on October 16, 2023
Love how easy this is to use. Just like a drink, mix in the packet and you’re good to go. Also arrived on time! 10/10 recommend
M.D.P.
Reviewed in the United States on May 12, 2022
I’m not complaining about the product, Lime Line has a great line of products, perhaps a bit on the pricey side for a baggie of shiny flakes, but for the outcome that Lime Lines sprayable flakes produce, I couldn’t ask for a better turnout, besides, everything on the planet is I bit monetarily inflated these days, so no harm done… WILL be buying again, 100% recommended, in fact, I already have to a few different painters! (The last 2 photos are only after the 1st cut and re-clear to lessen the texture, due to running out of clear, which when spraying this flake, you’ll WANT to make sure you have at least enough clear without flake leftover, so once you’ve reached full coverage or the level you’re aiming for, you have the ability to continue applying straight 2-4 coats of clear to lessen the massive texture this flake will leave you with….. trust me, words of experience… Learned the hard way….. But again, no complaints with the result!!
Recommended Products
$33.99
$ 17 .99 $17.99
$59.99
$ 27 .99 $27.99