Your cart is empty.
Your cart is empty.2” Front Leveling Lift Kit This listing is for a pair of Billet aluminum lift spacers. This lift kit will raise the front of your 2WD Dodge RAM by a true 2". Can be installed in about 1 1/2- 2 hours. They are CNC machined out of billet aluminum and then powdercoated black. The quality of this kit cannot even be compared to welded spacers that crack over time. These spacers are the strongest on the market and come with a 100% satisfaction guarantee and a lifetime warranty. It will come to you complete with instructions. Please note: Lift spacer thickness and lift is not a 1 to 1 ratio due to the suspension geometry.
Alejandro Rodriguez
Reviewed in the United States on October 7, 2024
USPS no es bueno repartiendo artículos espero q el el vendedor opte por enviar sus artículos con otra compañía
The Wiggins
Reviewed in the United States on February 25, 2023
2.5 hours install time. Instructions come with on assembly. Floor Jack's and stands make lower control arm installation easier. I refuse to use the widowmaker aka spring compressor. Definitely levels the truck out. Make sure to torque everything down so you dont wind yp like some of the comments. Recommended. Alignment needed after installation.
Patrick B.
Reviewed in the United States on October 3, 2023
I prefer the stance of a leveled truck and was able to achieve that with these spring spacers. I had my mechanic install them and he did say that it was tough to get the springs back in. I did have new shocks installed at the same time which were meant for the lofted front end. I can tell the front is stiff but it is expected with a 3/4 ton truck. I felt it was too soft before but also had some old factory shocks that contributed to that.
Customer
Reviewed in the United States on May 7, 2021
I’ve had these on for awhile and they leveled out the truck nicely. Easy to install after watching a few videos. It’s not necessary, but it does take some of the 4” travel out of your shocks. I haven’t found the perfect range yet, but I will be replacing my shocks at some point.
dillan
Reviewed in the United States on May 17, 2021
I was able to install these in about and hour. I am not a mechanic and I do not have much experience working with suspension. I did not follow the directions however. I removed the upper swing arm bolts and the lower shock bolt. That allowed me to drop the swing arm enough to remove the coil and install these. The truck seems to ride about the same and the look was greatly improved (IMO).
KG
Reviewed in the United States on November 10, 2021
I had this installed on a 2018 2wd Ram 1500. This absolutely ruined the ride of my truck. I drove it this way for a few weeks and the ride does not improve. It compresses the front coil springs which are shorter on 2wd Rams than they are on 4wd's. It basically takes away all of the initial softness of the coil springs. Trying to push down the front bumper with these on is much stiffer than any truck I've seen, including 3/4 tons. I had multiple people drive and inspect this setup. They were installed correctly. I have since paid to have them removed and returned to Amazon. Thanks Amazon for the easy return. It will make the truck lean less in corners because it is so stiff, but feeling every bump in the road and being jolted by bigger bumps is the trade-off. If you have a newer 2wd Ram, save your time and money. From more research, it seems a lift kit with new spindles is the best way to lift these 2wd's and not make it ride like it has no front shocks.
Aidan Davis
Reviewed in the United States on October 10, 2021
Kit went on pretty well. It will be difficult if you don’t have any mechanical experience. It did raise the truck a little more than I thought it would but it looks good. Shocks are a little tight with a 2” kit. An alignment is most definitely required after installation. Well worth the money!
Unearthlydust
Reviewed in the United States on July 18, 2019
I've done lift kits and many suspension projects. On the 2WD Ram, me and 5 other people COULD NOT install these. We tried Coil Compressor, Strut Compressors, nothing worked. What should have been a simple project turned into 4-5 hours of fighting and the end result was..... Truck is still stock.I ended up buying 2" level springs and shocks. The 2" springs went in flawless with no spring compressor. I could NOT get these to work.
Recommended Products
$69.95
$ 30 .99 $30.99
$67.90
$ 32 .99 $32.99