Your cart is empty.
Your cart is empty.Product Description
Junction Box Details
Reserved Holes
With reserved holes，the waterproof performance is optimized when you only need to drill the ones on demand.
Built-in Mounting Stud
All sizes of boxes are equipped with stud for the installation of circuit boards and DIN rail components.
Rubber Grommet
Removable cover with rubber grommet. It can seal the whole electrical box for a better waterproof performance.
GreenEggsandHam
Reviewed in the United States on February 22, 2025
Do not waste your money even if they send you $100 bill it's not worth the aggravation for this garbage product.You would be better off going to a Chinese restaurant and ordering a cup of soup and using that container.
Wolfgang Müller
Reviewed in Germany on February 22, 2025
Leider sind die Aussparungen für die Stutzen nicht genügend ausgearbeitet, so dass leider bei einer Dose das Gehäuse beschädigt wurde.Ansonsten ist die Dose top.
5th wheel camper
Reviewed in the United States on February 21, 2025
great product for a great price
Montesano
Reviewed in the United States on January 30, 2025
Works perfect!
Brian Steckley
Reviewed in Canada on September 9, 2024
Excellent Product
Jedibear
Reviewed in Canada on November 7, 2024
as advertised
Ramin
Reviewed in Canada on November 6, 2024
Proper for installation
marybell
Reviewed in the United States on November 18, 2024
We needed a small junction box to place surround sound speakers cords and extension in the ceiling and this worked perfect. It is plastic but is hard. Came with expansions screws and rubber grommets for knock outs.
Mario Desbiens
Reviewed in Canada on November 16, 2024
Merci
C. Clark
Reviewed in the United States on January 6, 2024
This junction box is nice but the top does not have screws to keep it on. The top snaps together instead of being screwed on. It does seem like a good fit but I worry about weather changes and how well the top will stay securely together. I’m sure there is a place for this particular junction box but it does not meet my needs. Product was returned.
Justin
Reviewed in the United States on April 11, 2024
Super cheap so you kinda get what you pay for. Walls are super thin and box Flexes a lot
PCBRain
Reviewed in the United States on December 23, 2023
I got this box to install a POE security camera for the house, I wanted the camera to be attached to the box in order to hide some of the excess cable that came with the box. Overall this box was exactly what I wanted for my project, it is pretty durable for being plastic and the box comes with everything needed to mount and run at least 2 cables out of it (I only needed 1). The craftsmanship of the box is really good, quite exceeding my expectations for the price, I would definitely recommend this to anyone who is in need of a product like this.There is one thing I think could be improved with this box. As I've mentioned earlier I bought this to mount a POE security camera, while I loved that this box came with 1/2" cable glands but the outside cap of the glands is just a TAD too small for a standard RJ45 connector (even without any sleeves) to go through. It is an easy fix where I just used a step drill bit to make the cap a bit bigger but after getting the cable through even when screwed all the way in there is still a little bit of space between the cable and the gland seal. I don't know if it is because I made the cap bigger but luckily where I mounted the box isn't be exposed to weather. Maybe this box isn't designed to have a CAT5 cable run through the gland but with POE stuff being very popular these days I think the manufacturer should take that into consideration.
William Taber
Reviewed in the United States on August 15, 2022
Size of box reviewed: 5.9 x 5.9 x 2.8 (150mm x 150mm x 70mm).I found the material of the box allowed for easy modifications with needed holes to be drilled. The lid fits nicely on the box, with a built-in seal around the edge to keep it weatherproof. Overall, I was very pleased with the quality of workmanship and material of this project box.My project required several holes to be drilled in my box. The pre-scored 1" (25 mm) knock-outs are nice, but I needed a 1-1/8" (28 mm) hole where two of those knock-outs were located. So, I drilled a small pilot hole in the center of the knock-outs and then used a hole-saw attachment on my drill to bore the required 1-1/8" (28mm) hole (see pic with yellow hole saw). My project was to supply and distribute multiple voltages to be used by different devices. I mounted 2 ScanStrut weatherproof USB-A ports (ASIN B071WXWS9C) on the sides of the box. Inside the box, I also mounted a 6 VDC buck converter (ASIN B07SGJSLDL) and a 12 VDC buck/boost converter (ASIN B07N3QT628). From each of these converters, I will route the outputs through the cable glands mounted on the top of the box. The LeMotech box comes with 2 black cable glands, but I used 2 grey ones (ASIN B094ZDSD86) instead of the ones that came with the box. These required 2 custom 12 mm holes to be drilled in the top side of the box..This has turned out to be one of the smoothest project box jobs I have done. Hints for good results: drill holes slowly into the material, and do NOT force the drill/saw into the material. When sawing, proceed slowly so as to CUT the material, rather than BURN it. Since this project, I have ordered another one of the boxes of this same size, as well as another in a smaller size, for use in other projects.
Recommended Products