Your cart is empty.
Your cart is empty.Product Description
3 Way Distilling Adapter Vigreux with 10/18 Top Thermometer Joint & 24/40 Lower Joints
The 3 way distilling thermometer adapter is similar to HMA016103 but with vigreux in the column near the lower male joint. and has a 10/18 thermometer joint at top. With two 24/40 inner joints at bottom and side, and the two joints are at a angle of 75 Degree. These frosted, precision-grounded provide a leak free way to connect the distilling column or distilling flask with glass condenser in the simple distillation, fractional distillation, vacuum distillation.
Laboy Glass 3 Way Distilling Thermometer Adapter with 24/40 Joints
The 3 way distilling thermometer adapter has a compression cap to form a vacuum tight seal of plain thermometer on Top. With 24/40 two inner joints at bottom and side, and the two joints are at a angle of 75 Degree . The bottom joint is usually connected to a distilling column for fractionation distillation or a distilling flask for the steam or vacuum distillation. The side joint may connect to a liebig or west condenser for water in and out when the temperature below 150 degree C, connect a air condenser if temperature above 150 degree C. The compression cap and o-ring fitting the thread opening at the top of the adapter, accommodating a thermometer or bleeding tube.
Cow-Type Distilling Receiver Apparatus Distribution Adapter with 24/40 Joints & Hose Connection
With 24/40 top female joint to fit a distillation head,and three 24/40 male joints at lower connects three round bottom flasks with 24/40 female joints. With a 10mm serrated glass connection attached to a vacuum or inert gas source.
Short Path Distillation Head with Vigreux Vacuum Distillation Apparatus with 24/40 Lower Inner Joints & 10/18 Thermometer Joint
Short path distillation is a compact purification method of vacuum distillation involving the vapor from the heating flask (a round bottom flask with standard joint)travelling a short distance, often only a few centimeters into the tubing before being condensed.A short path ensures that little compound is lost on the sides of the apparatus.Because it uses a lower boiling temperature, short-path distillation equipment has advantage for separating compounds that are unstable at higher temperatures. It’s also beneficial for purifying small quantities of compound.
Short Path Distillation Head Vacuum Distillation Apparatus Vigreux with Jacked Coiled Condenser with 24/40 Lower Inner Joints
Short path distillation is a compact purification method of vacuum distillation involving the vapor from the heating flask (a round bottom flask with standard joint)travelling a short distance, often only a few centimeters into the tubing before being condensed.A short path ensures that little compound is lost on the sides of the apparatus.Because it uses a lower boiling temperature, it has advantage for separating compounds that are unstable at higher temperatures. It’s also beneficial for purifying small quantities of compound. The short path distillation head is a key component in a short path distillation apparatus,a distillation head with condenser is designed with a very short path with thermometer joint for vapor passing from the heating flask to a connected condenser part.
Short Path Distillation Head Vacuum Jacked with Indentation Distilling Apparatus with 24/40 Joint & 10/18 Thermomter Joint
Short path distillation is a compact purification method of vacuum distillation involving the vapor from the heating flask (a round bottom flask with standard joint)travelling a short distance, often only a few centimeters into the tubing before being condensed.A short path ensures that little compound is lost on the sides of the apparatus.Because it uses a lower boiling temperature, short-path distillation equipment has advantage for separating compounds that are unstable at higher temperatures. It’s also beneficial for purifying small quantities of compound.
Conical Separatory Funnel 125mL with Two 24/40 Joints & 4mm PTFE Stopcock Pear Shape
The separators funnel is also known as separation funnel, separating funnel, or colloquially separate funnel, is a piece of laboratory glassware used in liquid-liquid extractions to separate the components of a mixture into two immiscible solvent phases of different densities. With shape of a cone and PTFE stopcock at bottom, and with a standard taper outer joint at Top, an inner joint at bottom.
Heavy Wall Design,Durable and Reusable
Laboy glass ware are all made of high quality boroslicate glass according to ASTM E438,heavy wall design,durable and reusable.
Radams
Reviewed in the United States on May 6, 2024
I received my products in a timely manner and wrapped well for shipping. Nothing was broken and the quality seems to be good even though I haven't used it yet.
Lotus Girl
Reviewed in the United States on February 25, 2020
Arrived quickly, flawless, works exactly as required.
Montana
Reviewed in the United States on January 14, 2020
Good quality glass that I have had no issues with. Faster shipping would make it 5 stars
Julian Broussard
Reviewed in the United States on December 25, 2019
Arrived earlier than expected. No blemishes/bubbles/imperfections whatsoever.
Darian Ballard
Reviewed in the United States on November 21, 2019
I love Laboy they're the very best.
J
Reviewed in the United States on July 13, 2018
Doesn't fit into the mantle well. Smaller than the mantle.
Customer
Reviewed in the United States on December 23, 2018
It doesn't fit as snugly into my heating mantle as I'd like but this shouldn't be an issue as it's still pretty close to the walls. As long as it's clamped nicely it should work
MM1989
Reviewed in the United States on May 10, 2016
Exactly as described. Arrived undamaged.
Recommended Products
$29.99
$ 12 .99 $12.99