Your cart is empty.
Your cart is empty.Product Description
Feature
For deglazing holes 2''-6-1/2'' in diameter. Easily adjust the range and pressure placed against your cylinders for well-controlled tension and effectiveness in creating a smoother, cleaner surface
Made of premium metal materials provide this brake caliper hone tool with strength, durability, and longevity
This cylinder hone brake caliper tool fits your small cars, import, and motorcycle cylinders; Always use brake fluid to keep your engine hone tool and brake parts properly lubricated while working
Operation:
1. Spray lubricant on the stones or the cylinder bores. Get the hone set up on the drill.
2. Insert the engine hone into the cylinder and run the drill at low speed between 300-700 RPM. Move the hone up and down around once a second.
3. After Honing, Use a paper towel to wipe out the inside of cylinder.
Knurled wheel adjusts spring pressure of stones against cylinder bore
Durable flexible shaft for easy use and self-centering
Cylinder Hone features 3 replaceable 3-Inch long 220 grit stones
Note: Don't Push or Pull the stones more than 3/4 Inch out of the cylinder. Don't Run the engine hone for more than 3 Mins.
Elias Sanchez
Reviewed in the United States on August 3, 2024
The stones will break apart and not even hone half an engine
joshua charles
Reviewed in the United States on June 14, 2024
For the price the item performed marginally, came apart shortly after I finished the 6th cylinder.
Mike Wheeler
Reviewed in the United States on January 22, 2024
It did a good job as a glaze breaker but in honing one 4 cylinder engine the stones were worn to nearly nothing. No way I could have completed a six or eight cylinder engine. Seems to be well constructed and worked fine, just be aware that you might want to have a second set of stones handy.
Dexter
Reviewed in the United States on April 4, 2024
I used this for my 1982 XR200, it's has a 2.6"(65.5mm) wide cylinder. I probably honed for around 45 seconds total and the stones have noticeable deterioration (mostly on one stone), I can probably use then 2 more times. It won't do a big block V-8 but it's perfect for a one-off type job.I soaked the stones with oil, set the tension spring to it's softest setting, put some more oil in the cylinder and honed for 30 seconds then another 15 after wiping clean. It put down a good crosshatch. Watch a youtube video.Unfortunately the hone uncovered some deeper lateral and vertical scoring that needs to be machined away so I will have the cylinder bored.The honer did a good job, the machinist was "impressed" when he measured the bore after my hone job. It did not taper and my cylinder was still very, very close to stock tolerances, minus the scoring. It would be difficult to remove lots of material with this honer.
Danny
Reviewed in the United States on January 26, 2023
I never leave anyone a bad review, but after buying this thing to deglaze the cylinders on my irreplaceable 1976 Corvette engine, I am irate! The thing basically ruined my engine and deemed it unusable. It doesn't lock into any set position on the tension, and it wants to tighten up while in use, and one stone wore out, while the other two hardly ground anything. Needless to say, my cylinders are trash now, and it's going to cost me alot of money and time to find anything like it. I'm not a happy camper.
Dan
Reviewed in the United States on July 19, 2022
I bought this to deglaze 4 cylinders on a 1500 cc triumph spitfire engine.1- The stones did not wear evenly, one wore out well before the other 2, I was not able to complete the engine with the stones provided.2- Because I was in the middle of deglazing, I went to the local parts store to get replacement stones from a well known brand. I had to file some of the material on the tool to get the stones to pivot properly in the tool. This was not the fault of toll, just the circumstance. If the supplied stones were more durable, item 2 would have not been an issue.
Martin
Reviewed in the United States on May 20, 2021
This was not the best I’ve owned but it is not far from it. Cost was fair and the value was as expected.
Recommended Products