Your cart is empty.
Your cart is empty.PLEASE BE SURE TO PAY ATTENTION TO YOUR HYDRAULIC CONNECTOR STYLE BEFORE ORDERING!! Go look at you tractor and verify your hydraulic connection is the right style before you order..don't ASSUME anything. Even the same model number can have different connector styles, depending on when it was made. This JailBreakYourTractor Pressure Adjustment Kit for Kubota B Series, BX 1880, 23S, 2380 & 2680 and more.. it includes a Pressure Gauge with FLAT FACED COUPLER.... Go look at the hydraulic connection to your front end loader (FEL) and disconnect one of the lines ...the male end (on your machine) should have be flat on the top..if it has a "nipple" the top then you need our poppet kit... Most 2017 and newer BX tractors have "flat faced connections", but double check to be sure. Nearly all B series use the "Poppet/nipple connectors. These kits do NOT fit the older 23D BX22 2200 IF YOU HAVE the larger Kubota L SERIES TRACTOR PLEASE ORDER OUR L-SERIES/MX KIT. THESE SHIMS WORK IN KUBOTA 50,60,70, 80, 1870, 2370, 25, 1880, 2380, 23s, 2670, 2680 and others, see full list in pictures... Does your tractor lack power? Does your Backhoe bog down? Does the scoop strain to lift a bucket of rocks? These adjustment shims will help bump up the pressure and bring back the muscle to your machine. This listing includes a 3000 P.S.I oil filled pressure gauge. It is VERY important that you do not exceed your machines max PSI to avoid damaging your machine. We typically see about a 25% per increase over factory when these shims are applied correctly. You may need all 3 shims, or just one or two..it all depends on where your tractor is to begin with. Many new tractors are not adjusted properly by the dealer before delivery and can be below spec from day one. Also, the coil springs within hydraulic pumps naturally lose strength over time and this kit will allow adjustment to compensate for that. The sizes included in the kit are 0.1 , 0.2 and 0.4 ...Unlike some other pressure adjustment kits, we only use Genuine Kubota shims to insure 100% compatibility and performance. We recommend this modification be done by mechanically inclined persons and assume no liability whatsoever for the use of these shims. Detailed Instructions are included...the whole process takes just a few minutes and is very simple to understand if you choose to do it yourself! Our gauges and fittings are made with high quality stainless steel fittings and a teflon sealant and are designed to last a lifetime, so you can check your pressure each season to make sure your pump is adjusted to its full potential! PLEASE BE SURE TO PAY ATTENTION TO YOUR HYDRAULIC CONNECTOR STYLE BEFORE ORDERING!!
AlanM
Reviewed in the United States on June 13, 2025
Functions exactly as described. Every .01 shim added about 50 psi for me. I used the .01 and .04 shims to get to 2000 psi. That leaves a .02 shim left if I wanted to go to 2100. My tractor measured 1750 stock on my BX2680. I deducted 1 star because the gauge face was a standard gauge face and did not have the tractor specific marks like shown in the video. The delivery was quick and was easy to use. I spent more time putting my front end loader back on. Took about 15 minutes.
timmyaustint
Reviewed in the United States on May 29, 2025
Tractor came from the dealer at 1680psi. Bumped it up to 2000psi. (2000-2100 is factory safe spec) the difference is amazing. Bucket can actually take a bite out of the pile instead of having to coax material into the bucket. And can actually lift a normal bucket load to max height. Small pressure difference. Huge performance difference. And the kit makes it super simple.
Steve M
Reviewed in the United States on May 22, 2025
Received product as advertised. Good quality gauge.Genuine OEM shims included. If you need the instructions they are clear and easy to understand.I have 2021 BX23s, checked pressure first, 1650 psi, after installing the .4 mm and .1 mm shims, pressure 1950 psi. Loader and backhoe performance back like new. Keep in mind not all springs are the same, you may have to use more or less shims than I did to get desired pressure. I did add the .2 mm shim as well just to checkand pressure was 2100 psi. I settled on 1950, the machine works good, even has less transmission whine.Good kit pressure adjusting kit.
Bryan Martin
Reviewed in the United States on March 3, 2025
I Love this product and I equally love supporting a small business. I increased my lifting capacity by 200lbs.
Heath R. Maggard
Reviewed in the United States on February 7, 2025
The hydraulic coupler are sized differently, depending on the year model.
Merrill Leriche
Reviewed in Canada on April 16, 2025
It's a good product with good customer service I recommend it to anyone
craig
Reviewed in Canada on September 7, 2024
The gauge fit perfectly on my 2023 kubota bx1880. The instructions are fantastic, explains how much psi each shim adds, even tells you what socket size to use and shows a picture of where the relief valve is located.
Recommended Products
