Your cart is empty.
Your cart is empty.Kohler GENUINE Part Replacement seal for single flush canister toilets Chemical resistant and designed to withstand wear Replaces red seal
John - Psychotherapist
Reviewed in the United States on February 5, 2025
This is usually the piece that fails resulting in that leaking sound. A quick fix and back to quiet.
lp
Reviewed in the United States on February 5, 2025
Works great
Customer
Reviewed in the United Arab Emirates on September 1, 2024
Perfect
Kathys Chattys
Reviewed in the United States on August 7, 2024
I thought I’d have to take a bunch of parts apart in my tank & drain all the water at the bottom. Nope! This just snaps into place & works like a charm & I’m proud to of fixed it myself. Good buy & an extra in case another toilet o-ring/seal fails. Easy to fix & you only have to remove the chain & lift the center plastic/PVC float. This snaps in easily & you do not need plumbers glue or anything like that. Easiest fix I’ve had on almost anything in my home. YAY!
craftman
Reviewed in the United States on December 7, 2024
The product fits as it should and seals well but doesn't last very long. A year or so is not long enough in my book
lowly student
Reviewed in the United States on December 27, 2024
This is what was needed to stop a slow leakage of water into the bowl. The toilet would fill occasionally. It was easy to install. The old one was very corroded from hard water. This will need to be regular maintenance, so having an extra is good.
KM in PA
Reviewed in the United States on December 20, 2024
perfect fiteasy fix3 minute job.
Aceman
Reviewed in the United States on November 13, 2024
Oem Kohler product. Easy to install no more slow tank leaks.
juan carlos ramirez
Reviewed in Mexico on October 17, 2024
Llegó más rápido de lo previsto, reemplazo justo de la pieza buscada
rhus
Reviewed in the United States on February 14, 2023
I had the older red type seal that shipped with my Kohler toilet about 15-17 years ago and it eventually became so worn down it showed variance in certain areas that made it no longer flat and snug around the canister and I would notice my tank is constantly pouring water down the bowl, attempting to refill. I didn't go with a cheaper or alternative part because I know this seal is guaranteed to work. It will have the appropriate thickness, and diameter. I don't know how these new yellow silicone based seals will last over time or how they will change (ex. shrink or expand) but I know they are supposed to be better and specifically replace the red seals. What I made sure to do is properly remove the chain from the canister and get it out with a quarter turn so I can properly clean it. I used isopropyl alcohol on a Q-tip to clean the groove on the canister that the seal will need to fit into, as well as the base that makes contact with the lower part in the tank. I then used a waterproof silicone grease (Danco 88693) that I spread on the entire seal lightly. This is probably not required but it does help provide an extra layer of protection on the seal from contaminants. This grease is typically used on o-rings in faucets and other seals on plumbing fixtures. There are 2 seals provided in separate packaging so one can serve as a great backup.
Recommended Products
