Your cart is empty.

Kegconnection Brew Clean - Kegerator Beer Line Cleaning Solution Powder - Easy and Safe to Use - Homebrew Kegs

5.0 (6) Write Review

Free shipping on orders over $29.99

$15.95

$ 7 .99 $7.99

In Stock

Qty.:

About this item

SAFE TO USE: Brew Clean solution is a safe and easy to use powder solution. It will not cause rust on kegs or home brew equipment, as this formula helps protect metals from corrosion. This cleaning solution works well with stainless Cornelius/Firestone style kegs, other stainless-steel kegs, as well as glass, plastic, and rubber home brew equipment.
HOW TO USE WITH KEGS: Use at least two tablespoons (more if kegs are stained), and fill kegs with hot water. Depress dip tube poppets and allow tubes to fill with the solution. To soak the keg lid, add solution and hot water to a bucket with the pressure relief valve open. We suggest adding one tablespoon of solution per 26 ounces or 3.25 cups of hot water. Water should be between 100 and 160 degrees. Let sit for at least one hour, then rinse with clean water. (BUCKET NOT INCLUDED).
HOW TO USE WITH BEER LINES: Use your Kegconnection Kegerator beer line cleaning kit with this refill of Brew Clean to clean your beer lines. Use one tablespoon of solution per 26 ounces or 3.25 cups of hot water. Run half the watery solution through your beer lines into a bucket. Dis-assemble your faucets and place them in a bucket with the solution. Let everything soak for about an hour. Run the remaining solution through your lines followed by clean water. (BUCKET & KIT NOT INCLUDED).
HOW TO USE WITH HOME BREW EQUIPMENT: Use one tablespoon of solution per 26 ounces or 3.25 cups of hot water (more if items are heavily soiled or stained). Use hot tap water between 100 and 160 degrees. Let each piece of equipment soak for at least one hour for maximum cleaning.
OTHER BENEFITS: This powerful cleaning solution cuts down on scrubbing, and will not leave a film on your kegs, lids, or other home brewing equipment. Proudly made in the USA.

Product Description

kegerator, keg tap, keg, kegerator cleaning kit, kegerator kit, beer keg,

Kegconnection Brew Clean

Brew Clean solution is a safe and easy-to-use powder solution. It will not cause rust on kegs or home brew equipment, as this formula helps protect metals from corrosion. This cleaning solution works well with stainless Cornelius/Firestone style kegs, other stainless-steel kegs, as well as glass, plastic, and rubber home brew equipment. HOW TO USE WITH KEGS: Use at least two tablespoons (more if kegs are stained), and fill kegs with hot water. Depress dip tube poppets and allow tubes to fill with the solution. To soak the keg lid, add solution and hot water to a bucket with the pressure relief valve open. We suggest adding one tablespoon of solution per 26 ounces or 3.25 cups of hot water. Water should be between 100 and 160 degrees. Let sit for at least one hour, then rinse with clean water. (BUCKET NOT INCLUDED). HOW TO USE WITH BEER LINES: Use your Kegconnection Kegerator beer line cleaning kit with this refill of Brew Clean to clean your beer lines. Use one tablespoon of solution per 26 ounces or 3.25 cups of hot water. Run half the watery solution through your beer lines into a bucket. Disassemble your faucets and place them in a bucket with the solution. Let everything soak for about an hour. Run the remaining solution through your lines followed by clean water. (BUCKET & KIT NOT INCLUDED). HOW TO USE WITH HOME BREW EQUIPMENT: Use one tablespoon of solution per 26 ounces or 3.25 cups of hot water (more if items are heavily soiled or stained). Use hot tap water between 100 and 160 degrees. Let each piece of equipment soak for at least one hour for maximum cleaning.

SAFE TO USE

Brew Clean solution is a safe and easy to use powder solution. It will not cause rust on kegs or home brew equipment, as this formula helps protect metals from corrosion. This cleaning solution works well with stainless Cornelius/Firestone style kegs, other stainless-steel kegs, as well as glass, plastic, and rubber home brew equipment.

Powerful Cleaning Solution

This powerful cleaning solution cuts down on scrubbing, and will not leave a film on your kegs, lids, or other home brewing equipment. Proudly made in the USA.

HOW TO USE WITH KEGS: Use at least two tablespoons (more if kegs are stained), and fill kegs with hot water. Depress dip tube poppets and allow tubes to fill with the solution. To soak the keg lid, add solution and hot water to a bucket with the pressure relief valve open. We suggest adding one tablespoon of solution per 26 ounces or 3.25 cups of hot water. Water should be between 100 and 160 degrees. Let sit for at least one hour, then rinse with clean water. (BUCKET NOT INCLUDED).

HOW TO USE WITH BEER LINES: Use your Kegconnection Kegerator beer line cleaning kit with this refill of Brew Clean to clean your beer lines. Use one tablespoon of solution per 26 ounces or 3.25 cups of hot water. Run half the watery solution through your beer lines into a bucket. Disassemble your faucets and place them in a bucket with the solution. Let everything soak for about an hour. Run the remaining solution through your lines followed by clean water. (BUCKET & KIT NOT INCLUDED).

HOW TO USE WITH HOME BREW EQUIPMENT: Use one tablespoon of solution per 26 ounces or 3.25 cups of hot water (more if items are heavily soiled or stained). Use hot tap water between 100 and 160 degrees. Let each piece of equipment soak for at least one hour for maximum cleaning.

HelpYourself

Reviewed in the United States on January 16, 2025

Extremely effective for cleaning and worth the price

L George

Reviewed in the United States on June 9, 2024

Easy to use. Exactly what I ordered.

Geno

Reviewed in the United States on February 25, 2024

I’ve been using a different brand that was a liquid that came with the kegerator and I would still get little particles of mold in my beer sometimes. So I bought this stuff to try and if zoom in on the picture you can see all the little particles of mold that came out. And the picture doesn’t show it as good as the naked eye. Plus I just cleaned the lines 2 months before when I put my last 1/4 barrel in

Customer

Reviewed in the United States on January 8, 2024

Was perfect and did the job as needed.

Kenny R.

Reviewed in the United States on March 23, 2022

I have been using it to clean my kegarator. So far it has been pretty good.

Christine ONeill

Reviewed in the United States on April 25, 2021

Perfect for kegerator.

Shopping Cart