Your cart is empty.
Your cart is empty.Replacement Keys for Lever handle on safety cabinet, set of 2 for lock no. 331CK More Information Model No 25999 UPC Code 697841008700 International Model No. 25999 Net Weight, lbs 0.1 Net Weight, kg 0.0
Treefroggy
Reviewed in the United States on May 6, 2023
It's garbage . Doesn't fit . Wrongly cut . Verified with locksmith . Marked with the same key number , but not cut properly .
Customer
Reviewed in the United States on May 28, 2023
Key was to thick to fit in the Key Hole.(Key Number on the key 331CK/Number on outside of Tumbler Face 331CK Matched)then after using 400 grit sand paper to make it slightly thinner so it would slide into the Key Hole, it would not turn the lock.the Key Did Not Work for me.Thank you..
Steve Lopez
Reviewed in the United States on October 24, 2023
I didn't notice the second picture had keys made with a different blank. My handle requires the double slots, as depicted in the first image, but I got keys with a slot on either side, like the second image (and it doesn't work in my handle as it won't insert.)update 2 Nov 2023They fixed the pictures by removing the keys for the L handle we have, and left the wrong configuration with a slot on either side. I got tired of trying to find what I needed and took a file to my handle and the keys. if you file back the ends of the top and bottom edges a little so the key can go deeper into the lock cylinder (sorry, I didn't take measurements before I filed all my keys) AND file away the top nub in the handle (opposite the tumblers), the keys work great! the bottom nub in the cylinder lines up with the lower slot in these keys, the vertical spacing is correct, and the cuts for the tumblers are also correct - it's just that they cut the pattern into the wrong blank for the L handle we have.
Howard Erickson
Reviewed in the United States on April 25, 2023
A+
exumagal
Reviewed in the United States on May 3, 2021
Worked just right.
Robert
Reviewed in the United States on June 14, 2016
Even though the keys are coded to the lock, they do not work. The lock # is 331CK and the keys are stamped 331CK but will not open the lock.Tried both keys, but no luck. Keys look like they are from a third party and not OEM. Might be that the keys are not cut correctly, but I see others have had the same experience. No fault of the vendor - not sure who the supplier is; may or may not be the cabinet manufacturer or lock manufacturer.Update: I took the set of keys and ran them across a fine wire wheel with just enough pressure to soften the edge and remove any burrs. The keys now work.
Rowfmouf
Reviewed in the United States on April 27, 2016
They did not work in my lock
chris burns
Reviewed in the United States on June 22, 2014
Just what I needed. Be sure to look for numbers on lock. Bought my cabinet at going out of business sale. No keys. Thanks again Amazon.
Recommended Products
$209.07
$ 86 .99 $86.99